Show off your 250R

[troybilt]

They all look good to me. Keep bringing the R's... I like to get ideas for when I ever have any spare cash!!:D

[danhung11]

Originally posted by 250r rider 88
danhung-i totally agree about building to their tastes

can you put some pics of the green R up so we can see how its coming along?

Here is a pic of the bike minus a few things. It will have more progress but plan to post all the pics once completely finished.

It's coming along, just not as fast as I would like. I plan to hit it some this weekend.

http://i223.photobucket.com/albums/dd228/danhung11/000_1121.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_1120.jpg

[pimpt250r]

another good looking green R, who did the graphics and cover

[my88r]

:eek2:

[woodsracer144]

Originally posted by danhung11
Here is a pic of the bike minus a few things. It will have more progress but plan to post all the pics once completely finished.

It's coming along, just not as fast as I would like. I plan to hit it some this weekend.

http://i223.photobucket.com/albums/dd228/danhung11/000_1121.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_1120.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_1116.jpg

Lastly, the plastics.

http://i223.photobucket.com/albums/dd228/danhung11/000_1008.jpg

what is up ith the two different a-arm setups on that R? there the max travel and then the stand.

Originally posted by heelclickinonaR
Just wanted to show some pics of my R as it is slowly coming along.
http://i24.photobucket.com/albums/c42/heelclicker/DSC00591.jpg
http://i24.photobucket.com/albums/c42/heelclicker/DSC00594-1.jpg
http://i24.photobucket.com/albums/c42/heelclicker/DSC00595.jpg
http://i24.photobucket.com/albums/c42/heelclicker/DSC00597.jpg
http://i24.photobucket.com/albums/c42/heelclicker/DSC00602.jpg
http://i24.photobucket.com/albums/c42/heelclicker/DSC00601.jpg
http://i24.photobucket.com/albums/c42/heelclicker/DSC00600.jpg
It's been 15 years since I owned my last R and I'll never make that mistake again.
Danhung, do those rear hubs look familiar?


i wanna see some update picks

[skyhighatv]

.

[skyhighatv]

.

[04yfz450nj]

sick r get more pics

[04yfz450nj]

sick r get more pics

[skyhighatv]

.

[dustinshuler]

bump keep em coming!!!!!

[mineralgrey01gt]

I know some people have asked me to see mine with the plastics on it, well here is some with some stock 86 plastics that I painted. They arent perfect by any means but they will do for now, also I appologize for the crappy pics:

before plastics:

http://img2.putfile.com/thumb/3/7100384167.jpg (http://www.putfile.com/pic/7810078)

http://img2.putfile.com/thumb/3/7100384171.jpg (http://www.putfile.com/pic/7810079)

after plastics:

http://img2.putfile.com/thumb/6/15322122149.jpg (http://www.putfile.com/pic/8250371)

http://img2.putfile.com/thumb/6/15322122240.jpg (http://www.putfile.com/pic/8250373)

http://img2.putfile.com/thumb/6/15322122213.jpg (http://www.putfile.com/pic/8250372)

http://img2.putfile.com/thumb/6/15322122281.jpg (http://www.putfile.com/pic/8250374)

The plastics are now painted all black with no stickers. It looks 100% better now

[woodsracer144]

Originally posted by skyhighatv
.

I LOVE THAT f UCK BUSH ON THE TOOL BOX OF WHAT EVER THATS AWSOME!

[heelclickinonaR]

Originally posted by 450killer265R
i wanna see some update picks

Alright, I just got done with my R this afternoon. Hot / Fresh pictures for your viewing enjoyment!!!!!


http://i24.photobucket.com/albums/c42/heelclicker/my250r01.jpg

http://i24.photobucket.com/albums/c42/heelclicker/my250r02.jpg

http://i24.photobucket.com/albums/c42/heelclicker/my250r05.jpg

http://i24.photobucket.com/albums/c42/heelclicker/my250r06.jpg

http://i24.photobucket.com/albums/c42/heelclicker/my250r03.jpg

[mineralgrey01gt]

Originally posted by heelclickinonaR
[B]Alright, I just got done with my R this afternoon. Hot / Fresh pictures for your viewing enjoyment!!!!!


http://i24.photobucket.com/albums/c42/heelclicker/my250r01.jpg


if you ever want to get rid of that seat cover, please and i mean PLEASE let me know!!!

[racer36]

250r's are awesome, I can't wait to start building my own Honda 2 smoke here in the next couple years!!

[atcsteve]

Here is mine!!!

[cmanson2]

lrd 330
frame
laeger stem, arms
elka suspension
the list goes all the way

[cmanson2]

another pic

[cmanson2]

330

[cmanson2]

rear

[cmanson2]

front

[gandgracing]

Heres a recent picture

[250r4life]

Originally posted by atcsteve
Here is mine!!!

that thing has been on craigslist in phoenix for months...

[atcsteve]

Originally posted by 250r4life
that thing has been on craigslist in phoenix for months... And.....your point? This is what I do,buy em,build em and sell em.I have sooooo much into this one,thats why the $4k price tag!I see by the rides you have listed that you must be looking/wanting and needing it!!!lol

[tg413]

Awesome R's everyone........Man i can flip through the pages and look at each quad and see the different personalities of each owner shine through on their machines......Lot's of hard work and dedication to keep them alive.....

[BERT306]

http://i7.photobucket.com/albums/y277/BERT306/macy112.jpg

[BERT306]

http://i7.photobucket.com/albums/y277/BERT306/macy124.jpg

[hang1p]

2rs

[hang1p]

1r

[hang1p]

3rs

[quad janern]

Originally posted by ct350trx
Here are some video's :D

http://nl.youtube.com/watch?v=isjaJ2ER1k8

http://nl.youtube.com/watch?v=dMIPmDYXQ1s&feature=related

thank you so much for the videos :D
i really like them. your R is sounding great !

[07HRC450R]

heres a pic of my dad's 250R before he got rid of it:(
http://i240.photobucket.com/albums/ff50/Ebmeyer18/toys005.jpg

[TheNewn]

That's actually a badass looking 250R. All stock except for the key performance crap. Pipe and Shocks mostly. Very nice.

[07HRC450R]

Originally posted by TheNewn
That's actually a badass looking 250R. All stock except for the key performance crap. Pipe and Shocks mostly. Very nice.
yeah it was a very clean R:(

[TheNewn]

Originally posted by 07HRC450R
yeah it was a very clean R:(


Why did he sell it? and why didn't you buy it?

[bushwesl]

Dustin Shuler's Roll Design Lobo/Sparks 330

http://i35.tinypic.com/10g010i.jpg

http://i35.tinypic.com/2nl4rgw.jpg

http://i37.tinypic.com/55l4zt.jpg

http://i38.tinypic.com/2ro5gg8.jpg

http://i33.tinypic.com/11tsw20.jpg

[250r4life]

Originally posted by atcsteve
And.....your point? This is what I do,buy em,build em and sell em.I have sooooo much into this one,thats why the $4k price tag!I see by the rides you have listed that you must be looking/wanting and needing it!!!lol

no point... just saying i had seen it on there for a while...

not me- no more bikes for a while... however, my next purchase will be a CR250

[fenix0069]

Pic of the lil monster - 310r

[kylacgarrett]

Originally posted by
My 330

I love the all black, makes it look tough.:)

[88TRX250R]

Originally posted by kylacgarrett
I love the all black, makes it look tough.:)

I'm the same way. I'm actually building mine right now. its a 330 and all blacked out. Still have a few more parts to go, this was a frame up restore...heres a pic of it but its with out the black plastics on it. just wanted to see it with some plastics on it.

http://i255.photobucket.com/albums/hh151/Crx_B16/H250r1.jpg

[trx250rider]

traded a stock 400ex for this

[07HRC450R]

Originally posted by TheNewn
Why did he sell it? and why didn't you buy it?
he sold it cause he got offered more than what he expected for it and i didnt want it cause i cant stand 2 strokes:devil: i cant jump them near as good as i can a 4 stroke:D

[trx250rider]

was it worth it

[BigBore24]

Originally posted by trx250rider
traded a stock 400ex for this

what year? regardless i think you got a great deal. im also coming from and ex and this thing is so much more fun. sweet r

[trx250rider]

it was a 2003

[tys88r]

Here's my 88....

[mfr422]

Yeah, I gotta PAIR...here they are at Silver Lake, MI

http://www.meyerfamilyracing.us/08Quads/Lon250Rs.jpg

[ballzdeep38]

Heres an action shot from Milestone MX.

http://i22.photobucket.com/albums/b347/ballzdeep38/MilestoneMX2.jpg

[07HRC450R]

Originally posted by tys88r
Here's my 88....
WOW! i dont think my eyes have ever seen anything this purty!!!!:eek2:

[tys88r]

Here's another....

[dubs chops]

here's my new baby. its an 88. i will tray to get better pics up later.


http://img165.imageshack.us/img165/2710/250r1ox6.jpg (http://imageshack.us)
http://img165.imageshack.us/img165/2710/250r1ox6.05572b1dcc.jpg (http://g.imageshack.us/g.php?h=165&i=250r1ox6.jpg)

http://img179.imageshack.us/img179/5015/250r2nc7.jpg (http://imageshack.us)
http://img179.imageshack.us/img179/5015/250r2nc7.c7a75b5f9c.jpg (http://g.imageshack.us/g.php?h=179&i=250r2nc7.jpg)

[dynofox]

Here is my '86, just finished building it! :D

Highlights include: Denton +2 a-arms, 450r front shocks that have been custom valved and sprung, houser steering stem, PEP steering stabilizer, Lonestar axle, paul turner 89 trx race pipe, 89 clutch update plus some other misc. billet parts.

[88redrocket]

Heres my '88 with the Laeger LT arms just installed.

http://i37.tinypic.com/244e7hx.jpg


http://i36.tinypic.com/2441lcw.jpg

[87R_Racer]

Here is my 87...man I love this quad!

[mcboomport]

still waiting on a few things....

[mcboomport]

front

[mcboomport]

will post better pics in a week or so..

[norcalduner]

Originally posted by tys88r
Here's my 88....

Do you have any problems passing Oregon's sound laws with that ESR set-up? BTW, awesome looking quad:macho

[tys88r]

Originally posted by norcalduner
Do you have any problems passing Oregon's sound laws with that ESR set-up? BTW, awesome looking quad:macho

Thanks :devil: Ya, Memorial weekend got stopped and tested at 102 dec. Been 4-5 times since and have avoided any tickets... I get followed by the rangers/sherrif, but I lose them and hang low for a bit:blah: Im looking into having Dave moore build me a carbon fiber silencer. That will get it down to 97 or so... Still the law is 93:mad:

[Creech52]

Dave Moore...havent heard that name in ages, hes the one that built the polonda motors right?

[Mxjunkie]

My 86 is comin together finally :D

http://a423.ac-images.myspacecdn.com/images01/104/l_99aaa6de54f5ddb18e875408f4b40fee.jpg

[matusdkw]

This is me and my 86 runing in Villa gesell, Argentina... i`ll post some pic more later...

[mikemess]

This is my TRX250R, unfortunately I didn't build it but I do own it and ride it!
It has a CT 330 Kit and is super quick!http://www.throttlejunkiesracing.net/images/250r(1).jpg http://www.throttlejunkiesracing.net/images/250r(2).jpg

[warrior4fun]

heres my new one

[warrior4fun]

heres my new one

[warrior4fun]

heres my 265r

[warrior4fun]

heres my new 265r

[warrior4fun]

sorry bout that not sure what i did new to posting still

[1Sick250R]

Another '88. Just finished it 3 months ago.

[1Sick250R]

Here's another.

[woodsracer144]

Originally posted by warrior4fun
heres my 265r
what is the thing in the bottom left hand corner?

[1Sick250R]

One more.

[woodsracer144]

nice duner!

[flip89]

87 265 r
http://i27.photobucket.com/albums/c157/jrloveschevy/My250r-1.jpg

[jon370r]

Mine on my trip to Glamis Dunes from Maine.

[jon370r]

one more

[woodsracer144]

Originally posted by jon370r
Mine on my trip to Glamis Dunes from Maine.

are there axles and stuff on that? thats weird!

[jon370r]

Originally posted by woodsracer144
are there axles and stuff on that? thats weird!

It was a full burnt out Ford Turbo Deisel. Looked like a around a 2001 model not sure.

[woodsracer144]

oh my... i would get a trailer out there if i could and take it!

[mcboomport]

The color needs to be seen in person. Its actually black, with a ton of tiny red flake. The red anodizing matches perfectly. It turned out a little more reddish than I had expected, but I'm happy with it. I have about 6 more nuts/bolts that need chromed and I have a few more billet pieces that need anodized.

The motor is on first bore, ported mid/top 4-mil stroker, 38 A/S.

I think I'm gonna agree with havinnoj, I think sand bikes need some paint. I am going to paint the plastics/ seat within a year or so.. It's been a tough decision because I'm scared how it will hold up, but I've come this far...

I am finishing an 86 right now that will be my play bike.

I am going to do a frame up on my wifes 86 next year.

[mcboomport]

front

[mcboomport]

you gotta love the heat tape

[mcboomport]

LAST ONE

[1Sick250R]

Hey Boomport, that's a sweet duner. I see you're running 9 paddles, what's all done to the engine?

[mcboomport]

First bore- Just mid-top port and 4mil stroker-38 a/s carb, lightened flywheel.

When I bought the bike, the motor just had clean up porting, stock carb, had K&N, V-force reeds, Paul Turner pipe (dented by the frame, eventually had a huge crack at the frame mount) and had 10 paddles.. It was retarded to ride... haha. I immediatley sold the tires, and I tried some 8 paddles and could not stand them either!! I don't know what it was about the 8 paddles.

Before I rebuilt the motor, I put the 38 a/s on, lightened the flywheel, and bought the 9 paddles. If you kept the R's up and dumped the clutch, It would launch very good, but the bike just didn't have enough power. I would have to feather the clutch and downshift a lot when hill climbing.

With the new motor the R's stay up very easily and it has a great amount of power for not being a big bore. I have only had the bike out once this year, and had some motor problems right off the bat, but the 9 paddles seemed to work great. I will give you more input when I take the bike out again.

[mcboomport]

by the way, I love your bike man.

[1Sick250R]

Originally posted by mcboomport
by the way, I love your bike man.

Thanks bro. Those red fullbores you got look great, but some custom paint work to go with the candy frame color would make it sick.

[1Sick250R]

Originally posted by mcboomport
by the way, I love your bike man.

Thanks bro. Those red fullbores you got look great, but some custom paint work to go with the candy frame color would make it sick.

[danhung11]

http://i223.photobucket.com/albums/dd228/danhung11/100_1012.jpg
http://i223.photobucket.com/albums/dd228/danhung11/100_1013.jpg
http://i223.photobucket.com/albums/dd228/danhung11/100_1014.jpg

[pdxbigfoot]

the more i REALLY like them.
Dan.....SICK!!!... That bad boy is clean,clean...clean.


mcboomport...i cant wait to see her in real life...throw it in the truck next time you stop by.

Mine's comming!!!

[danhung11]

Originally posted by pdxbigfoot
the more i REALLY like them.
Dan.....SICK!!!... That bad boy is clean,clean...clean.


mcboomport...i cant wait to see her in real life...throw it in the truck next time you stop by.

Mine's comming!!!

I know... can you believe I got rid of this one? I miss this one! :(

http://i223.photobucket.com/albums/dd228/danhung11/000_0143.jpg

[norcalduner]

Originally posted by 1Sick250R
Another '88. Just finished it 3 months ago.

Hey Sick ..... that bike looks dope. If you ride Dumont, give me a holler so I can check that out in person. If you had not noticed, there has been a steady decline of 250r's in our sand box in the last few years so your contribution to the dying 250r population is more than welcome:D

[norcalduner]

Damn, you guys make my quad look like a POS:( that I'm almost embarrassed to post up an updated pic of my clunker:p

[norcalduner]

Just make sure to look back just in case I'm on your @ss. Haha:D

[1Sick250R]

Originally posted by norcalduner
Hey Sick ..... that bike looks dope. If you ride Dumont, give me a holler so I can check that out in person. If you had not noticed, there has been a steady decline of 250r's in our sand box in the last few years so your contribution to the dying 250r population is more than welcome:D

Hey Norcal, thanks for the compliment. I deffenitly ride Dumont. Ill be out there Oct 3-5, and 31-2 for halloween. I have noticed there's less 250's out each time I go, most are jumping on the 4poke bandwagon. I have a yfz but I rather ride my R. You have any dates penciled in for this season?

[Cr85rRida]

Norcal what happend to the blue fullbores? those set it off nice! Still looks mean though. Nice R's EVERY ONE !!!!

[troybilt]

update on my project:

Here what I've done so far... I haven't touched the motor, though. Plan to buy another motor and dig into it. Burgard +2+1, Elkas, LSR +4 axle, New seat and cover, all new plastic, Blingstar components, and few other things.

[woodsracer144]

Originally posted by danhung11
http://i223.photobucket.com/albums/dd228/danhung11/100_1012.jpg
http://i223.photobucket.com/albums/dd228/danhung11/100_1013.jpg
http://i223.photobucket.com/albums/dd228/danhung11/100_1014.jpg

holy i love them a-arms ... what do you run for shocks LT or ST?them are pimped... i would like some info...

[1Sick250R]

Originally posted by troybilt
update on my project:

Here what I've done so far... I haven't touched the motor, though. Plan to buy another motor and dig into it. Burgard +2+1, Elkas, LSR +4 axle, New seat and cover, all new plastic, Blingstar components, and few other things.

Hey Troy, that's a trick looking R. The black beadlocks set it off nicely. Good work!

[danhung11]

Originally posted by woodsracer144
holy i love them a-arms ... what do you run for shocks LT or ST?them are pimped... i would like some info...

They are standard travel plus 2's with 4-1 rims. If you are interested in the front end, I would sell them with the shocks. I have a set of LT Laegers that I would like to put on the bike. Just need money to get some shocks.

Let me know.
Dan

[norcalduner]

Originally posted by 1Sick250R
Hey Norcal, thanks for the compliment. I deffenitly ride Dumont. Ill be out there Oct 3-5, and 31-2 for halloween. I have noticed there's less 250's out each time I go, most are jumping on the 4poke bandwagon. I have a yfz but I rather ride my R. You have any dates penciled in for this season?

No definite dates yet but Thanksgiving week for sure. I am interested in doing Halloween if I can get a new hauler in time. I will be down at the sand show at Costa Mesa this weekend (tomorrow) to shop around :D

[norcalduner]

Originally posted by Cr85rRida
Norcal what happend to the blue fullbores? those set it off nice! Still looks mean though. Nice R's EVERY ONE !!!!

I alternate the plastics once in a while to make me feel I'm riding a different quad everytime:devil:

[woodsracer144]

Originally posted by danhung11
They are standard travel plus 2's with 4-1 rims. If you are interested in the front end, I would sell them with the shocks. I have a set of LT Laegers that I would like to put on the bike. Just need money to get some shocks.

Let me know.
Dan
pm sent!

[1Sick250R]

Originally posted by norcalduner
No definite dates yet but Thanksgiving week for sure. I am interested in doing Halloween if I can get a new hauler in time. I will be down at the sand show at Costa Mesa this weekend (tomorrow) to shop around :D

Cool. Ill be there today also. I heard skat-trak has som e good deals. Need to get a few sets of paddles.

[danhung11]

Originally posted by woodsracer144
pm sent!

Clean out your pm's. Your mailbox is full.

[woodsracer144]

cleaned out

Originally posted by danhung11
Here is a pic of the bike minus a few things. It will have more progress but plan to post all the pics once completely finished.

It's coming along, just not as fast as I would like. I plan to hit it some this weekend.

http://i223.photobucket.com/albums/dd228/danhung11/000_1121.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_1120.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_1116.jpg

Lastly, the plastics.

http://i223.photobucket.com/albums/dd228/danhung11/000_1008.jpg

i like the green! get sum budlite blue on there to it goes good together my buddys is like that

Originally posted by danhung11
Here is a pic of the bike minus a few things. It will have more progress but plan to post all the pics once completely finished.

It's coming along, just not as fast as I would like. I plan to hit it some this weekend.

http://i223.photobucket.com/albums/dd228/danhung11/000_1121.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_1120.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_1116.jpg

Lastly, the plastics.

http://i223.photobucket.com/albums/dd228/danhung11/000_1008.jpg

i meant to say add some more budlight blue:rolleyes:

beast a** bike dude:D

[800screws]

just some slight upgrades...

[800screws]

other side

[woodsracer144]

Originally posted by 800screws
other side

are you racin that beast?!?! that is sick as hell and i still wish i had my 250r! im gonna have to rebuild it up... i still have most the parts....

[800screws]

lol, acutally i'm not! i went back to 2 wheels. just sitting in the garage.

[woodsracer144]

Originally posted by 800screws
lol, acutally i'm not! i went back to 2 wheels. just sitting in the garage.

HAHA ROTFL! me too! ... im in the pit bike deal right now... lol

i have yzf400ex hybred and i never ride it with a elka LT in the rear with a highly modded motor...need to get a different front end but im not too worried about it... i wish i had my R still... that was killer fast... really nice quad tho i really want it!

[woodsracer144]

what are the modds?

[800screws]

full laegers narrow pro trax frame
+4 laegers t pin front end
cannondale moto billet front hubs
ac racing front bumper
pwr radiator
pro tapers
moose billet thumb throttle
pro design killswitch
steel braided brake lines
works elite perch with arc lever
clarke clear tank
ac pro peg nerfs
skid plate
laegers cr500 link swingarm
lsr +4 axle
axis susp
hiper rims with razors
pwk39 carb
v force 2 reed cage with spacer
new brake pads
curtis sparks pipe and esr silencer
master cylinder cover
ct 265 powervalve engine-new piston and nikasiled cylinder
88-89 lowerend with hinson clutch cover
01 cr250r ignition with fmf dual curve cdi

[woodsracer144]

SWEET! have any pics of the front?

[woodsracer144]

Originally posted by 800screws
3.
it's being shipped monday, i cannot wait to show up at the track with this thing! people are going to be like WTF!!


for real
how many nice quads do you have! holy $hit!

[800screws]

lol!! yeah i know...i just like collecting 2 strokes....i just have the 250r and the jp lt250/500r...i'm trying to sell one of them.

[knobbyboy]

My XC set up 86- 295cc

I have another one (250cc) for sale at the link below-

http://www.exriders.com/vbb/showthread.php?s=&threadid=366324

[heelclickinonaR]

Originally posted by 800screws
just some slight upgrades...

This is one of my favorite R's of all time. I love how the graphics look on the bike.

Do they still make those Terry racing graphics?

[08 GPX 177 ATC]

Originally posted by YFZRob
Here are some shots of my 88 in almost 100% stock form. These were taken about a month ago.

http://www.looseboltsmotorsports.com/images/250R/250RRSide8.JPG

http://www.looseboltsmotorsports.com/images/250R/250RLSide.JPG

I am in frikin love man!!!!!

[08 GPX 177 ATC]

Its not the TRX but it's close.

http://i64.photobucket.com/albums/h196/edog_02/100_5283.jpg

[methyman]

Here is my 1989 Puma Powered TRX250R

http://i41.photobucket.com/albums/e274/methyman/Drag%20TRX250R/copyStreet3.jpg

[bushwesl]

Originally posted by methyman
Here is my 1989 Puma Powered TRX250R

http://i41.photobucket.com/albums/e274/methyman/Drag%20TRX250R/copyStreet3.jpg

That is ***king sick! Details please!

[methyman]

What do you want to know?

[bushwesl]

Well, which Puma setup (bore, stroke)? Intake? Exhaust (I assume custom, who built it)? Tranny? Clutch? Have you ran it yet? Dynoed? If so, what kind of times/numbers are you putting up?

[trx250rider]

is that the stock radiator?

[methyman]

Yes!!
http://i41.photobucket.com/albums/e274/methyman/Drag%20TRX250R/copystreet1.jpg

[250r rider 88]

was the air filter off when you took the pic or do you just not run one?

[methyman]

It was off. At the 1/8 mile track I dont run one. On the streets I do.

[pepshocks]

bike built by kellner motorsports

[woodsracer144]

nice R ! i dont really dig the green or yellow frame... but ithink it would be sweet with a white or black... i dont know... MO... still a nice R! doin a woods on that?

[josh_10_07]

Originally posted by methyman
Yes!!
http://i41.photobucket.com/albums/e274/methyman/Drag%20TRX250R/copystreet1.jpg
Is that a Puma you got on there?

[josh_10_07]

Work with me here i saw the very last pic first and no other posts talking about it being a puma.lol. it only took one quick look to know what it was. As for all the specs....i have already talked to some people about theirs and they seem pretty protective which is understandable. I have no secrets with my puma though.lol,but i was just stating that there is a high possibilty that info is under wraps

[josh_10_07]

oh and here is mine.looks a little diff now thoughhttp://i135.photobucket.com/albums/q138/josh_10_07/GetAttachment.jpgoh and here is mine.looks a little diff now though. i would like to now what numbers yours did on the dyno though just to let me know what i'm looking forward to. Dont want to know anything more or anything less.lol

[trxredrider]

Originally posted by pepshocks
bike built by kellner motorsports Man, I wish that there were more around like this. Nice...

[knobbyboy]

Sleeved 295cc motor, V force reeds, FMF pipe w/turbine core silencer, K&N filter w/ Outwear, Moose folding shift lever. 37t rear sprocket, DID Gold O-ring chain, 450R carrier bearings. AC nerfs, PRM A-arm, chassis and swingarm skids, XC front bumper, desert rear bumper, OEM gold rims w/ razor tires. Renthals w/ pro grips, easy clutch lever, TRX90 thumb lever, denton stabilizer, Acerbis hand guards. OEM Red 88 plastic, working head light and tail light, OEM tool box, OMF scoops. Rebuilt and revalved OEM rear shock, OEM front shocks (to be upgraded soon).

[footy]

That is sweet!
Here's mine: 1986 works triple rate front shocks, procircuit pipe, razr tires, lsr bearing carrier, V-force reeds and a fat old man stabbing the throttle!

[mcboomport]

Heres a picture of my 86 that I ended up getting from a dude who owed me some cash. I figured I’d tell you guys the story of how I ended up with this thing, cause its kind of interesting. (I am almost completed with the build, So I’ll post new pics soon)

The bike was bought on EBay for 2500 bucks. It came from Ohio, and some guy’s 12 year old son drag raced it. He was selling it cause he had a bunch of banshees, and wanted his kid to race banshees.

The bike was a disaster, but had some decent parts on it. The motor was a 330 ESR (polished) , drag tranny with a Mikuni Carb, Antifade hub, Douglas wheels. Nice seat cover, so one so forth.
It had some crazy wheelie bar welded to the aftermarket 88 swingarm which created some cracks on the top of it. The axle was a DuraBlue that was cut about 3 inches on each side and the stock rear hubs drilled out and welded on the axle!
The tires were some strange balloon paddle type that looked straight out of the seventies.
The rear shock was toast!! I think the front shocks were off of a banshee.
The frame was cracked to the max! It had some gussets that were booger welded together at one time, some strange motor mounts on the lower chassis. It had no headstay. It also had some square foot pegs welded on, with some 3/8” solid steel welded from the end of the square foot pegs to the subframe. The carb was connected the air filter by a piece of round rubber tubing and duct tape (this will come into play a little later in my story).
SO… I helped my buddy get the bike to a decent rideable state (new rear shock, new axle, bunch of other parts), but in the mean time, he’s buying crap that he shouldn’t have been worrying about. chrome a-arms, 400Ex billet front hubs, polished gas cap, ect.. I kept telling him I wouldn’t ride the bike without an air boot, but I guess I didn’t make it clear enough….
The bike’s second dune trip to Florence; duct tape ripped, sand went in motor, motor went poof.

Ok, now it gets interesting. The guy is getting back into coke, losing his house, losing his car.

The guy then owes me some money at the time. (about 2,500 bucks for a car we bought from him (that’s another story)) So instead of paying his buddy, his house payment, or truck payment, he decides to completely tear the bike down. He took the frame to a fabricator. New gussets, custom headstay, new tubes in the lower chassis, the works.
He spent over a grand on the frame!!
He couldn’t afford to get the frame back at first cause he had no clue how much it would be and he had no money. The fabricator must have threatened him a few weeks later, cause he came up with the money some how. THEN, he started powdercoating a bunch of parts, bought a stainless steel bolt kit, you get the idea.

He also took the motor to have it rebuilt. 1200 bucks. He had absolutely no money at this time. (This was about 6 months ago, so I don’t even know if the motor is still there).
Then he lost his house, got his truck repoed, ect.
I then make a deal with him that if he gets me the bike I will wipe out our debt. I would put the bike together for him, let him ride it, and even let him buy it back when he gets to that point. But, he didn’t get me the motor…He was missing parts that I had to track down, and when I asked him to get some parts, he said “It’s your bike”. He was right, #$%@ him. It is my bike.
So I took it upon myself to get this pile of fourwheeler parts together, sell a few parts and get a motor, and a few missing parts from the bike. I’m not sure if I made out on the deal or not, I had to do a lot of work, lot of searching, ect, Either way, I’m psyched. I’ve got 3 R’s now, and this actually wont be that bad looking of a bike. (except for maybe the out of control looking plastics, haha)

[knobbyboy]

Awesome story dude! (Those pegs look totally scary!!)

[danhung11]

Originally posted by knobbyboy
Awesome story dude! (Those pegs look totally scary!!)

I second that on the story... it's like a you saved a guy and got an R out of it.

Get some pegs before you lose a leg....;)

[Brauap]

Originally posted by mcboomport
LAST ONE

Duuuddddeeee! Run for QOTM!! Nicest quad ever!! Soo beautiful! Can't even find the words.. but the one I can think of is: AMAZING! :eek2: :devil: :eek2: :devil: :eek2:

[trx310R#24]

Originally posted by mfr422
Yeah, I gotta PAIR...here they are at Silver Lake, MI

http://www.meyerfamilyracing.us/08Quads/Lon250Rs.jpg

hahah ride there every sep.

[Bama250R]

Just putting it back out there!

The old "R" has less than 20 hours in 20 years.Haven't rode it in a couple a years. Just sitting in the garage covered up.



1988 Honda Fourtrax 250R:
New Cylinder - stock bore - Wiseco Pro-lite piston
Mildly ported by JC Racing
LRD Pipe/Silencer
Boysen Rad Reed Valve/Carbon Fiber Reeds
K&N Air Filter
RPM Anti-Vibe Steeing Stem
Pro Taper Black Anodized Fat Bars
Stock OEM Red Plastic
Factory Effex Seat Cover & Graphics
New OEM Seat Foam
Clarke Black 4.0 Gallon Gas Tank
39mm Keihin CR FCR Carb
DID O-Ring Chain
Sunstar Steel Sprockets
Duncan Front Chrome Bumper
AC Rear Grab Bar
OMF Belly Skid Plate
OMF Swing Arm Skid Plate
OMF Radiator Scoops
Steel Braided F/R Brakelines
RAD Axle Nut
OMF Brake Block Off Plate
NAC'sEngine Case Protector
ITP C Series Aluminum Rims
ITP XCR Holeshot Tires

[bushwesl]

I figure I should post some pics of my updated R. It's been rideable since the end of summer, but I've been too busy to post up pics. Anyway, here you go:

http://i33.tinypic.com/dbtys.jpg

http://i37.tinypic.com/24g509h.jpg

http://i33.tinypic.com/23m3cbd.jpg

http://i38.tinypic.com/rihhyt.jpg

http://i34.tinypic.com/fk06cw.jpg

http://i35.tinypic.com/25txkk3.jpg

[pdxbigfoot]

That bad boy is clean, clean, clean!!
Great job!!!

[bushwesl]

Originally posted by pdxbigfoot
That bad boy is clean, clean, clean!!
Great job!!!

Thanks!! It's funny that you mention it being clean, because in my eyes it's dirty! :D :p When I first finished it it was clean, clean, clean, but unfortunately they're too fun to ride to just sit there as a show peice ;) And for some reason they never come quite as clean as once you first put them together.

[st8jacket]

number 2...All 250 except the engine..Theres a twin of it somewhere out there..
http://c3.ac-images.myspacecdn.com/images02/62/l_79de726d46c54b87bac1f2ffd95a5fba.jpg
http://c1.ac-images.myspacecdn.com/images02/38/l_7b79b404b67a46a5a86d4b6d3e69c174.jpg
http://c4.ac-images.myspacecdn.com/images02/28/l_169e8db47c004693a722c18beae2e077.jpg
http://c2.ac-images.myspacecdn.com/images02/41/l_874b4b296911484bb417d62eaf668ee9.jpg

[knobbyboy]

So what's your quad running on? What engine is that in there?

[danhung11]

Originally posted by st8jacket
number 2...All 250 except the engine..Theres a twin of it somewhere out there..


How did you get the newer style of IMS heel guards to fit? I am sure there are others wondering the same thing.

Nice color scheme! :D I have one with same colors...except white frame.

[st8jacket]

I beleive there off a 450..My brother made two brackets of aluminum that drop off the rear frame down to them...very easy..
my brother 250rbadboy built it,but his internet skills suck to post pics..
i'm just the pit crew/photographer

the engine is a cr80 eric ghor ported with the typical goodies..

the shame of it is the original was stolen 6 months ago,and he lost the first half of the season..

[danhung11]

Originally posted by st8jacket
I beleive there off a 450..My brother made two brackets of aluminum that drop off the rear frame down to them...very easy..
my brother 250rbadboy built it,but his internet skills suck to post pics..
i'm just the pit crew/photographer

the engine is a cr80 eric ghor ported with the typical goodies..

the shame of it is the original was stolen 6 months ago,and he lost the first half of the season..

I remember that post regarding the stolen R. If you can get some closer pics of them heel guards, that would be great. My email is danhung11@gmail.com.

Here is a shot of mine...

http://i223.photobucket.com/albums/dd228/danhung11/100_1014.jpg

Is this the twin you were referring to?

[knobbyboy]

"the engine is a cr80 eric ghor ported with the typical goodies.."

where is the kick start lever?

[st8jacket]

its there,just hard to see,its a rearward kick so it doesnt sit in the plastics like the r's does..to clear the plastics it was cut bent and rewelded..

I will get those pics this weekend at the next race..

nah,i meant a twin as the one that was stolen..It was allmost identical...thats a good lookin r that ya have though..

[Creech52]

Heres mine thus far, nothings tight as I plan on getting all new fastners and i need a few more pieces to have everything complete. Later on its all coming back apart for new bearings and powder and everything Im just throwing it together to get it running and ride it a bit. Thanks to those that have supplied the parts you see and the ones you dont.

http://i140.photobucket.com/albums/r12/fakingdeath52/250R/DSC_0086.jpg

http://i140.photobucket.com/albums/r12/fakingdeath52/250R/DSC_0087.jpg

http://i140.photobucket.com/albums/r12/fakingdeath52/250R/DSC_0088.jpg

http://i140.photobucket.com/albums/r12/fakingdeath52/250R/DSC_0089.jpg

[73watermutt]

Originally posted by danhung11
I remember that post regarding the stolen R. If you can get some closer pics of them heel guards, that would be great. My email is danhung11@gmail.com.

Here is a shot of mine...

http://i223.photobucket.com/albums/dd228/danhung11/100_1014.jpg

Is this the twin you were referring to?



I'm in LOVE!!!!!!! Man that thing is SWEEEEEEET!!!!!!!!!

[TilltheEnd]

I miss the old R's. are there still classes for them to run in?

[st8jacket]

sure,There are a few that still run Atco,I think in open b or c..Dudes pretty good,places top 3 every week..

[bushwesl]

Originally posted by st8jacket
sure,There are a few that still run Atco,I think in open b or c..Dudes pretty good,places top 3 every week..

Funny that you mention Atco. I lived in PA for six months while on a co-op and Atco is one of the tracks that I checked out. I'm assuming I saw the same guy you're talking about. He had a full Roll Design Lobo with a Duncan 340 PV. Needless to say, it was sick!

[korniev]

WOW I have not been around for like 4-5 month but the thread is still on the top:)
Happy to see that!
Thanks to everyone for keepin it alive!!!

[korniev]

WOW I have not been around for like 4-5 month but the thread is still on the top:)
Happy to see that!
Thanks to everyone for keepin it alive!!!

[pepshocks]

YEA, IT WAS BUILT FOR JAMES WAHL, GNCC PRO AM RIDER AND ITS 4 SALE!!!

[st8jacket]

I posted the pics of the heel gaurds in another thread here..Any other questions feel free to pm me..

that r for sale wouldnt happen to be this one is it?
http://img.photobucket.com/albums/v226/playful316/atco%2011-2-08/Picture103.jpg
http://img.photobucket.com/albums/v226/playful316/atco%2011-2-08/Picture054.jpg

[skyhighatv]

Is that Ron Rank in that picture at atco?

[bushwesl]

Originally posted by st8jacket
http://img.photobucket.com/albums/v226/playful316/atco%2011-2-08/Picture103.jpg
http://img.photobucket.com/albums/v226/playful316/atco%2011-2-08/Picture054.jpg

That's definitely the R that I seen at Atco. And yes, he is good :D

[Nac's22]

i met that guy at e-town! i had to go up and talk to him since he was the only other 250r i have ever seen racing... thing is sick!

[Mean250r]

that 250r is *****in! I met that guy before and he hauls ***!

[Wanna250r]

Here's my new 250r MX Ready

http://i376.photobucket.com/albums/oo207/Evil_monkey85/Photo072.jpg

http://i376.photobucket.com/albums/oo207/Evil_monkey85/Photo077.jpg

http://i376.photobucket.com/albums/oo207/Evil_monkey85/Photo079.jpg

http://i376.photobucket.com/albums/oo207/Evil_monkey85/Photo083.jpg

http://i376.photobucket.com/albums/oo207/Evil_monkey85/Photo084.jpg

http://i376.photobucket.com/albums/oo207/Evil_monkey85/Photo095.jpg

[woodsracer144]

what kind of shocks are those? i've never seen them!

[woodsracer144]

Originally posted by bushwesl
That's definitely the R that I seen at Atco. And yes, he is good :D

well take a look at his bike.. IMS ROLL lobo chassie with axis.. and a fully built motor... he should haul some major ***...

[st8jacket]

Originally posted by woodsracer144
well take a look at his bike.. IMS ROLL lobo chassie with axis.. and a fully built motor... he should haul some major ***...
not to start a peeing match but from what Ive learned through my years of riding,its about 10% bike 90% rider that keeps you up front..

[quad janern]

wanna250r, that bike looks sick!:eek2:
i really like that green plastic. get some black graphics on it :D

[Wanna250r]

Originally posted by woodsracer144
what kind of shocks are those? i've never seen them!

Stadium LT with big tank :)




Originally posted by quad janern
wanna250r, that bike looks sick!:eek2:
i really like that green plastic. get some black graphics on it :D

Thank:D .. Yes graphics = Soon:p

[quad janern]

:D
are you racing with it?

[Wanna250r]

Not now, i live in Quebec and the snow is comming:eek: this summer i will try some competition of mx with my friend.

[woodsracer144]

Originally posted by st8jacket
not to start a peeing match but from what Ive learned through my years of riding,its about 10% bike 90% rider that keeps you up front..
i totally agree with you on that... im thinkin most the time when some one has the top parts normally they know how to ride... but i geuss there are the people that just have the money from mommy and daddy...

[woodsracer144]

Originally posted by Wanna250r
Stadium LT with big tank :)





Thank:D .. Yes graphics = Soon:p


how much are they? i've never heard of them? how do they compair to elka, pep, axis those shocks?

[Wanna250r]

They are great.. mine is about 20 inch of long in the front, fully fully ajustable, big gaz tank.. you can take off huge and long jump and get a smooth landing
I never saw a blowed stadium shock :p

my opinion:
---> better than pep,works,axis,ohlins ...
---> barely the same as elka LT
---> not better than fox shock (for mx racing)

[woodsracer144]

where do you get them? how much are they?
thanks

[Wanna250r]

I got these shock with the bike
My model of suspension is 1800$ for front and 1100$ for rear
Part #: Front SS-HII-PII-ZPL LT
Rear STS-PRII-HRII-ZPL

[Pro1200]

Wanna250r, how do you like the magura hydro clutch?

[Wanna250r]

very smooth compared to cable clutch, More easy to shift!

[rustyATV]

Originally posted by woodsracer144
where do you get them? how much are they?
thanks

Just an FYI: There used to be a guy here in Georgia who was selling those, but he could never get his finances together and went under. He swore by them, though.

[trx450Rrider]

http://photos-f.ak.fbcdn.net/photos-ak-snc1/v378/103/26/1236630251/n1236630251_30220877_4589.jpg (http://)
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v378/103/26/1236630251/n1236630251_30220878_5199.jpg
http://photos-h.ak.fbcdn.net/photos-ak-snc1/v378/103/26/1236630251/n1236630251_30220879_5809.jpg

[superx2]

not much but its mine

http://i277.photobucket.com/albums/kk68/superx2_87/th_014-1.jpg (http://s277.photobucket.com/albums/kk68/superx2_87/?action=view&current=014-1.jpg)

http://i277.photobucket.com/albums/kk68/superx2_87/th_018.jpg (http://s277.photobucket.com/albums/kk68/superx2_87/?action=view&current=018.jpg)

http://i277.photobucket.com/albums/kk68/superx2_87/th_015.jpg (http://s277.photobucket.com/albums/kk68/superx2_87/?action=view&current=015.jpg)

http://i277.photobucket.com/albums/kk68/superx2_87/th_024.jpg (http://s277.photobucket.com/albums/kk68/superx2_87/?action=view&current=024.jpg)

[battman]

Here is my 250r that I am bringing back from the dead. Its not done but its getting closer.

<a href="http://s460.photobucket.com/albums/qq321/ashleybatt/?action=view&current=11162008012.jpg" target="_blank"><img src="http://i460.photobucket.com/albums/qq321/ashleybatt/11162008012.jpg" border="0" alt="Photobucket"></a>

<a href="http://s460.photobucket.com/albums/qq321/ashleybatt/?action=view&current=11162008011.jpg" target="_blank"><img src="http://i460.photobucket.com/albums/qq321/ashleybatt/11162008011.jpg" border="0" alt="Photobucket"></a>

<a href="http://s460.photobucket.com/albums/qq321/ashleybatt/?action=view&current=11162008010.jpg" target="_blank"><img src="http://i460.photobucket.com/albums/qq321/ashleybatt/11162008010.jpg" border="0" alt="Photobucket"></a>

<a href="http://s460.photobucket.com/albums/qq321/ashleybatt/?action=view&current=11162008009.jpg" target="_blank"><img src="http://i460.photobucket.com/albums/qq321/ashleybatt/11162008009.jpg" border="0" alt="250r"></a>

[badquad]

Nice colors. Reminds me of something!!!

Not the bad 250R I have, but the other quad! (:

[2muchquad]

action pic from a couple weeks ago

[trx310R#24]

Originally posted by 2muchquad
action pic from a couple weeks ago

lol this is in back of crumps (big game)! under the high way

[2muchquad]

yeap...sure is :D

[Wanna250r]

Some pics of my Green 250r with another race ready white 250r And an Hybrid crf450 Black 2r !

http://i376.photobucket.com/albums/oo207/Evil_monkey85/DSC00199.jpg
http://i376.photobucket.com/albums/oo207/Evil_monkey85/DSC00090.jpg
http://i376.photobucket.com/albums/oo207/Evil_monkey85/DSC00091.jpg

http://i376.photobucket.com/albums/oo207/Evil_monkey85/DSC00144.jpg
http://i376.photobucket.com/albums/oo207/Evil_monkey85/DSC00146.jpg
http://i376.photobucket.com/albums/oo207/Evil_monkey85/walshcrf450002.jpg

[8686]

Nice Walsh.

[Lynch01ex]

wanna250r, Thats a nice line up of quads there!

[danhung11]

Question:

Is that a chrome frame? If so, can you get closer pics of the black bike?

Thanks! and nice bikes! ;)

[g9901920]

very very nice set of bikes you guys have.
that walsh is amazing!

[Wanna250r]

Originally posted by danhung11
Question:

Is that a chrome frame? If so, can you get closer pics of the black bike?

Thanks! and nice bikes! ;)

Yes it's a fully chrome frame :cool: And sorry i don't have more pics of this hybrid... i'll try to find more pics!

[bill rudloff]

Another trx just waiting for ice so she can wear her new studded shoes! Actually its for sale:(

[bill rudloff]

other side

[Mxjunkie]

Keep on posting!! I love seeing the legends of the atv world still kicking and alive!! :macho

[voodoochassis]

heres a couple i owned in the past plus a 250r/426 hybrid
http://i281.photobucket.com/albums/kk211/voodoochassis/myquad012.jpg
http://i281.photobucket.com/albums/kk211/voodoochassis/myquad002.jpg
http://i281.photobucket.com/albums/kk211/voodoochassis/9.jpg

[jmack3986]

My 89 250R with DR swinger PT head Lrd Exhaust(before itBroke) Pep Fronts ohlins rear Douglas plus 2 a arms and much more

http://i48.photobucket.com/albums/f230/jmack3986/PB290234.jpg

[woodsracer144]

Originally posted by jmack3986
My 89 250R with DR swinger PT head Lrd Exhaust(before itBroke) Pep Fronts ohlins rear Douglas plus 2 a arms and much more

http://i48.photobucket.com/albums/f230/jmack3986/PB290234.jpg

nice r! do any racing? welcome to the fourms!

i have a question about your driveway....
is there just dirt inbetween the locks? or a cement? i did some landscaping on like a rock or brick deck and stuff and we just use dirt...

wish I had a picture but I was at the races 2 weeks ago and there was a 250r frame and what not all built up but a new CRF150r dirtbike motor in it to race the one class. Kind of sad to see the 250r motor taken out but its deffinately the most bad *** quad in its class

[cartman0102]

My TRX 250R 1989

http://img131.imageshack.us/img131/8279/p1220704fa4.jpg (http://imageshack.us)

http://img244.imageshack.us/img244/5302/p1220705jd5.jpg (http://imageshack.us)

http://img244.imageshack.us/img244/5433/p1220706oc9.jpg (http://imageshack.us)

http://img48.imageshack.us/img48/2515/p1220710ji8.jpg (http://imageshack.us)

http://img48.imageshack.us/img48/681/p1220718yz3.jpg (http://imageshack.us)

[danhung11]

Originally posted by cartman0102
My TRX 250R 1989

That's Christophe's old bike - ct350rx?

That is too wild, I sold him that Clarke tank and it has gone country to country - anyways.... nice bike! It was also QOTM in April 2008.

http://www.atvriders.com/qotm/quadofthemonth2008-04-white-laeger-honda-trx-250r-atv.html

[cartman0102]

I just bought her the ATV!

I'll take good care!

[Kirt13]

Originally posted by cartman0102
I just bought her the ATV!

I'll take good care!
Congratulations on owning a very nice bike.
What brand of plastics are those?

[cartman0102]

origin plastic Honda

[baldathoR]

Originally posted by cartman0102
[B]My TRX 250R 1989



Holy ****!

So jealous.

Get some youtube action up.

[250R_SV]

My R, not near as modified as yours R's, but having fun.
greetings from El Salvador

[woodsracer144]

Originally posted by 250R_SV
My R, not near as modified as yours R's, but having fun.
greetings from El Salvador

nice r! hopefully i'll have one here with in a few weeks...
what are you mods?

[250R_SV]

Basics:
-Engine
UNI filter
Reeds
oversized piston
FMF fatty pipe
Fat Boy 2
carburator 36mm

-looks
bumper, graphics, meier plastics

[05BlackYFZ]

Originally posted by cartman0102
My TRX 250R 1989

http://img244.imageshack.us/img244/5433/p1220706oc9.jpg (http://imageshack.us)



I've never seen the rear shock reservoir mounted on the rear grab bar before, very interesting. Where did you get that clamp?

[willie32]

[QUOTE]Originally posted by cartman0102
[B]My TRX 250R 1989

http://img131.imageshack.us/img131/8279/p1220704fa4.jpg (http://imageshack.us)

by far my favorite i have ever seen.

[DEERCHOOPER]

ok, i need a nap, lol

152 pages of some kick arse 250r's

i just picked up one and got it torn all the way down to rebuild it and get it coated.

dont know where im going color wise but should be sick when its done.

[Rich250RRacer]

Is there an echo in here? :D

[Mean250r]

Originally posted by Rich250RRacer
Is there an echo in here? :D

I think i hear crickets? :uhoh:

[josh_10_07]

Here are some recent pics
http://i135.photobucket.com/albums/q138/josh_10_07/068.jpg
http://i135.photobucket.com/albums/q138/josh_10_07/076-1.jpg
http://i135.photobucket.com/albums/q138/josh_10_07/077.jpg
http://i135.photobucket.com/albums/q138/josh_10_07/066.jpg
And here are some pics of the gfs 250r
http://i135.photobucket.com/albums/q138/josh_10_07/250r2.jpg
http://i135.photobucket.com/albums/q138/josh_10_07/250r.jpg

[cartman0102]

Originally posted by 05BlackYFZ
I've never seen the rear shock reservoir mounted on the rear grab bar before, very interesting. Where did you get that clamp?

ATV FOUR PLAY

[ct350trx]

Originally posted by cartman0102
ATV FOUR PLAY

It was a front shock reservoir that a made to fit on the rear grab bar

[quadinfamily]

i know it not a 250r but it is really close , with a 250r rod and 72mm piston make it a 330 gasgas
http://i93.photobucket.com/albums/l79/quadinfamily/DSCF2398.jpg
http://i93.photobucket.com/albums/l79/quadinfamily/DSCF2396.jpg
http://i93.photobucket.com/albums/l79/quadinfamily/DSCF2395.jpg

[woodsracer144]

how do you like your gas gas? i almost got a decked out one by me for 3 grand... but i passed it up...

[danhung11]

Originally posted by 05BlackYFZ
I've never seen the rear shock reservoir mounted on the rear grab bar before, very interesting. Where did you get that clamp?

This is a PEP TRX450R rear shock reservoir clamp.

http://i223.photobucket.com/albums/dd228/danhung11/000_0987.jpg

[Michael88R]

Danhung,
Did you have to modify the holes for that clamp to bolt up or did it fit the 250R as is?

[Michael88R]

Danhung,
Did you have to modify the holes for that clamp to bolt up or did it fit the 250R as is?

[Michael88R]

Danhung,
Did you have to modify the holes for that clamp to bolt up or did it fit the 250R as is?

[danhung11]

Originally posted by Michael88R
Danhung,
Did you have to modify the holes for that clamp to bolt up or did it fit the 250R as is?

It bolted right up. Keep in mind this is 88-89 style grab bar.

Dan

[maryland450r]

Here's some pics of mine that I just finished rebuilding......
.
http://i119.photobucket.com/albums/o125/sheps1097/250rdone003.jpg
http://i119.photobucket.com/albums/o125/sheps1097/250rdone010.jpg
http://i119.photobucket.com/albums/o125/sheps1097/250rdone006.jpg
http://i119.photobucket.com/albums/o125/sheps1097/250rdone014.jpg
http://i119.photobucket.com/albums/o125/sheps1097/250rdone002.jpg

[pdxbigfoot]

OOOOHHH!!
Thats pretty!
great job man. Its all about the details. How much fab work did you have to do to get that rear caliper to mount up??

[maryland450r]

Thanks!
The rear caliper almost lines right up. The mounting holes are about 1/4" closer together than the 250r. I just drilled a new hole in the front part of the caliper plate to accommodate it. I also made an adapter plate for the master cylinder foer the same reason.

[450rJam]

now that my friend is a thing of beauty...................

one of my top 5 favorite for sure

[rigger]

That is one nice clean looking R. I really like it.

[TheNewn]

Those nice heel guards are what really does it for me, nice R.

[jhtrx250r]

1986 trx250r powder chromed frame
coustom 72mm PV motor
taper bored 39mm pwk
LRD pipe

[jhtrx250r]

hers a close up
How do you guys get more than 1 pic per post?

[250Renvy]

Originally posted by jhtrx250r
hers a close up
How do you guys get more than 1 pic per post?

What kind of cylinder is that? CPI?


Most people use a hosting site and just put links to get more than one pic, but if you delete the pics from the hosting site they get deleted here so sometimes it's better to host on this site, unless you want big pics.

[jhtrx250r]

I have no idea what type of cylinder it is?
hopeing some one would have an idea
It is the same displacement as my ESR 310 72mm
but is nikislled and has more ports
What ever it is it puts out 56 rear wheel HP
and smokes my 450r and YFZ450

Thanks for the info on pics, I am not internet savy but hope to learn soon.

Thanks james

[250Renvy]

I'd say it looks like a cpi sphynx.

I was on the phone with them finding out about their cylinders and asked about powervalves and that is what I was looking for.

Could you do me a huge favor and talk to whoever you got the machine from or dig up as much info about that as possible and pm me about it.

[kiesta00]

Heres some pictures from our last trip at LA dunes...wow didnt know the pictures were so grainy

http://i70.photobucket.com/albums/i106/kiesta00/1231129711.jpg
http://i70.photobucket.com/albums/i106/kiesta00/1231114151.jpg

http://i70.photobucket.com/albums/i106/kiesta00/l_371cdf5523b64d61a0bd7359e66c3cac.jpg
http://i70.photobucket.com/albums/i106/kiesta00/l_521cc53089e94ff8a3f063386edc9465.jpg


I'll get some more tonight...got some new goodies for the bike!

[jon370r]

My MX setup from last fall.

[jon370r]

riding area

[unit32]

Just bought it a couple of months ago. Bone stock 87.

[KP250R]

http://i40.photobucket.com/albums/e237/kpgsx/DSC08535.jpg
http://i40.photobucket.com/albums/e237/kpgsx/DSC08534.jpg
http://i40.photobucket.com/albums/e237/kpgsx/DSC08533.jpg

Like, Mickey D's... I'm Lovin it

[Cr85rRida]

http://img.photobucket.com/albums/v252/Cr85rRida/DSC_0056.jpg
http://img.photobucket.com/albums/v252/Cr85rRida/DSC_0057.jpg
http://img.photobucket.com/albums/v252/Cr85rRida/DSC_0058.jpg
http://img.photobucket.com/albums/v252/Cr85rRida/DSC_0060.jpg

[LONG-ROD]

That was a nice video. look like you where haveing fun, not sure about McDonalds though????:macho

[kiesta00]

Nice lookin bikes guys. Here's some of my recent additions:

http://i70.photobucket.com/albums/i106/kiesta00/DSC02317.jpg
http://i70.photobucket.com/albums/i106/kiesta00/DSC02320.jpg
http://i70.photobucket.com/albums/i106/kiesta00/DSC02323.jpg
http://i70.photobucket.com/albums/i106/kiesta00/DSC02325.jpg
http://i70.photobucket.com/albums/i106/kiesta00/DSC02326.jpg

[Mean250r]

Originally posted by kiesta00
Heres some pictures from our last trip at LA dunes...wow didnt know the pictures were so grainy

http://i70.photobucket.com/albums/i106/kiesta00/1231129711.jpg
http://i70.photobucket.com/albums/i106/kiesta00/1231114151.jpg

http://i70.photobucket.com/albums/i106/kiesta00/l_371cdf5523b64d61a0bd7359e66c3cac.jpg
http://i70.photobucket.com/albums/i106/kiesta00/l_521cc53089e94ff8a3f063386edc9465.jpg


I'll get some more tonight...got some new goodies for the bike!

who needs helmets? just added weight right? :eek2: :rolleyes:

You guys look like the goon squad out there.

[kiesta00]

We were actually just scouting a good strip to race at so we didn't get the helmets just yet...when people started lining up we decided to join in for a rip.