Show off your 250R

[aasco90]

bump

[my88r]

Originally posted by aasco90
bump
:confused:

[woodsracer144]

hey my 88r, what does that 200xc pump out for Hp?

[woodsracer144]

how do you like it as a bike, sorry guys i know its a 250r post... im lookin at a rm.. and kinda at thos 200

[woodsracer144]

i dont wanna spend 4 g's on something that just for play so i need it cheap... cheaper is better...

why?

[bushwesl]

Use PM's PLEASE...

[Cr85rRida]

Originally posted by bushwesl
Use PM's PLEASE...

i know! i thought there were some more sweet R's on the page!!!

keep it going, my cousins 300ex and my R last new years

http://img.photobucket.com/albums/v252/Cr85rRida/Picture009-1.jpg

[Cr85rRida]

more recent pic


http://img.photobucket.com/albums/v252/Cr85rRida/HPIM2796.jpg

[woodsracer144]

Originally posted by bushwesl
Use PM's PLEASE...

im sorry, but im not the only off topic one on here... out of all thses pages im sure theres more than me and 88r that have talked off topic...

like i said im sorry about it.

[my88r]

Originally posted by woodsracer144
im sorry, but im not the only off topic one on here... out of all thses pages im sure theres more than me and 88r that have talked off topic...

like i said im sorry about it.

I know. delete your posts. like did and pm me if you want.:macho

[trx400EXtreme]

Originally posted by TWISTED DINLI
whats that stuff hanging from the ceiling?:huh i think it is the ceiling lol.

[Jer250R]

my 250R i just picked up last week.

its not much, but after reading through 90+ pages of everyone else's I have a few ideas on where to start the rebuild I'll be doing over the winter :eek2:

http://img523.imageshack.us/img523/5797/250r01vs0.jpg

[RedRider23]

that sure seems like a great start. i like the blue fullbores. what color combo are you gonna go for?

[my88r]

Jer250R
:macho

[beobe99]

Nice R.. whats up with the g35 with the rims? any other mods to that? Im al about the imports myself. actualy work at a jdm importer.


Originally posted by Jer250R
my 250R i just picked up last week.

its not much, but after reading through 90+ pages of everyone else's I have a few ideas on where to start the rebuild I'll be doing over the winter :eek2:

http://img523.imageshack.us/img523/5797/250r01vs0.jpg

[woodsracer144]

Originally posted by beobe99
Nice R.. whats up with the g35 with the rims? any other mods to that? Im al about the imports myself. actualy work at a jdm importer.

every thing is imported now days... even the motors an the artic cats they are built by Suzuki or Kawi and then shipped to the plant and bolted up... and those are built in the USA well sopose to be

[Jer250R]

The G has a few mods...volk wheels, tein flex suspension, hks exhaust, intake mods, and an ever-changing exterior. it has been taking most of my money the last few years :)

As for the R, I think it will be a XC/MX mix build...colour will probably be black, gold, and chrome :)

here is a little bigger pic with a couple of my other toys (i have a 300 fourtrax 4x4 as well, but it is way too ugly to photograph)




http://img240.imageshack.us/img240/7787/toyswe6.jpg

[duner265]

My 87 with a built 265cc
Currently building a 310 PV for it.

[duner265]

87 265

[RedRider23]

thats a sharp R. tell me how that 265 runs.... im building one now and im curious.. nice bike !!!:D

[Waynoka Local]

I bought this off Ebay a couple months ago, and it's at my buddy's house now. He drove to Missouri to get it for me, and he said it flat-out hauls for a 265. It won't look like this for too long (read sig). :devil:

Here are some details:

Laeger's 250R narrow chassis
Roll Design Lobo II +3 a-arms
Laeger's CR500 link swingarm
LSR Axcaliber +4 axle
Custom Axis long-travel shocks front and rear
Curtis Sparks 265R
LRD pipe and silencer

[woodsracer144]

Originally posted by Waynoka Local
I bought this off Ebay a couple months ago, and it's at my buddy's house now. He drove to Missouri to get it for me, and he said it flat-out hauls for a 265. It won't look like this for too long (read sig). :devil:

Here are some details:

Laeger's 250R narrow chassis
Roll Design Lobo II +3 a-arms
Laeger's CR500 link swingarm
LSR Axcaliber +4 axle
Custom Axis long-travel shocks front and rear
Curtis Sparks 265R
LRD pipe and silencer

are you puttin a kawi kxf 250f motor in there?

[Waynoka Local]

Originally posted by woodsracer144
are you puttin a kawi kxf 250f motor in there?

I'll be using a KXF250 Tecate-4 engine with a 330 stroker kit in it. It will actually be 326cc, hence "KXF326 Project." I'll get all the benefits of the ultimate 250 engine and then some. If you've ever seen the Roll Design KX250-powered quads that were built for Bill Ballance and William Yokley between 99 and 02, then that will give you an idea of the finished product.

[woodsracer144]

never seen one got any pics of them?

[my88r]

Originally posted by woodsracer144
never seen one got any pics of them?

[woodsracer144]

ok im sorry to all of you that think im talkin off a bit but i have one last question on this...
why did they just take the kx250 motor out of the bike im sure that is way better than the tecate motor, its already PVed and all that and it should already pump out alot oh Hp from being in a bike...

[Cr85rRida]

thats like saying take a cr250 motor and drop it in a R.

The R motor is beefer and im pretty sure its more powerful then a cr250 motor in a QUAD chassis. THe bikes motors are great but i dont think it would be worth the hassel because they cant deliver as well with all the extra weight.

[250Renvy]

Originally posted by Waynoka Local
I'll be using a KXF250 Tecate-4 engine with a 330 stroker kit in it. It will actually be 326cc, hence "KXF326 Project." I'll get all the benefits of the ultimate 250 engine and then some. If you've ever seen the Roll Design KX250-powered quads that were built for Bill Ballance and William Yokley between 99 and 02, then that will give you an idea of the finished product.


I'm assuming you'll be doing this when you get back stateside? But when you do this Pleeeeaaaase make a thread somewhere and take lots of detailed pictures. I wanted to do this with my custom frame and get the frame built for the motor because from everything I've read, the Tecate motor was the tops of the 250's, the chassis just sucked. I decided not to because I wanted it all honda.

Just curious if you plan on hacking the Laeger frame?

[TheNewn]

Another reason for sticking to quad motors might be the fact that dirt bike R's aren't counter balanced...which blows in a quad...

[Waynoka Local]

Woodsracer144, they did use the KX250 engine in them. Doug Roll built the chassis and swingarms specifically for those engines. They were very fast, but like was mentioned, they didn't have a counter-balancer, and they vibrated a lot. They were eventually replaced with Honda 250R engines because the KX250 engines would wear the riders out. I know, I know, an all green Kawasaki with a Honda engine in it. :rolleyes: I'm not worried about the power at all. A big-bore Tecate-4 engine is no slouch. Not by a long shot.

250Renvy, don't worry. I will be making a thread about my project. I might not be able to update it every day, but I will tend to it. I plan on taking thousands of pictures along the way, of which I may post the majority online. About the chassis, I wouldn't say "hack" but modify. At a minimum, I'll need to move the lower engine mounts and modify the swingarm so it attaches to the engine cases. I'll fabricate a new head mount because they are removeable, and the front mounts will be cut from plate steel. The tabs for the front mounts aren't going to be touched. I have access to a plasma cutter, TIG welder, Bridgeport end mill, lathe, and any other machine shop equipment I might need. Being in the Army has its advantages. ;) I hate Frankenstein quads that look like they were put together with JB Weld and bubble gum. This is going to be one that people go out of their way to look at. I'll just have to wipe the drool off it a lot. :D

The pic My88R posted is similar to what mine will look like, and I have that one in my KXF326 Project folder, but I'll be using Fullbore fenders now that they are finally offering them in green. This is about 90% what you'll see when I'm done.

[danhung11]

Originally posted by Waynoka Local
Woodsracer144, they did use the KX250 engine in them. Doug Roll built the chassis and swingarms specifically for those engines. They were very fast, but like was mentioned, they didn't have a counter-balancer, and they vibrated a lot. They were eventually replaced with Honda 250R engines because the KX250 engines would wear the riders out. I know, I know, an all green Kawasaki with a Honda engine in it. :rolleyes: I'm not worried about the power at all. A big-bore Tecate-4 engine is no slouch. Not by a long shot.

250Renvy, don't worry. I will be making a thread about my project. I might not be able to update it every day, but I will tend to it. I plan on taking thousands of pictures along the way, of which I may post the majority online. About the chassis, I wouldn't say "hack" but modify. At a minimum, I'll need to move the lower engine mounts and modify the swingarm so it attaches to the engine cases. I'll fabricate a new head mount because they are removeable, and the front mounts will be cut from plate steel. The tabs for the front mounts aren't going to be touched. I have access to a plasma cutter, TIG welder, Bridgeport end mill, lathe, and any other machine shop equipment I might need. Being in the Army has its advantages. ;) I hate Frankenstein quads that look like they were put together with JB Weld and bubble gum. This is going to be one that people go out of their way to look at. I'll just have to wipe the drool off it a lot. :D

The pic My88R posted is similar to what mine will look like, and I have that one in my KXF326 Project folder, but I'll be using Fullbore fenders now that they are finally offering them in green. This is about 90% what you'll see when I'm done.

This sucks... this is so close to my color combo, but I am thinking of doing it in a white frame with gold accents...

[woodsracer144]

are the rm 250 motors and the kx motors the same?

[woodsracer144]

http://www.exriders.com/vbb/showthread.php?s=&threadid=328563
i started a post on what we are talkin about with the kx motors and all that the links above.

[my88r]

heres some more pics

[my88r]

:eek2:

[mineralgrey01gt]

sick R's!

[Cr85rRida]

WOW the m full bores look nice!!!! AND i think we hit 100 PAGES??!!!!

[korniev]

Just wanted to say BIG BIG BIG thanks to all of you guys who have been posting in this thread for quiet a while! YES, we did in fact reach 100 pages and seriously I never thought this thread would become so famous. But now it is my favourite without any doubts. We have here probably one of the largest collections of R's I ever seen personally. I suppose this thread earned a right to be sticky finally^)
Cheers to everyone!

[svahle]

Here is my 310r. I don't think I have already posted it in this forum. If I have, sorry!

[criminalpoet]

Sometimes im just amazed at just how many badazz 250R's there are on this forum and this on is no exception. NICE BIKE MAN!

[tg413]

86, w/ 310 + stroked, Gibson long travel arms, pep triple rates LT , bills pipe, 400ex front calipers, 400ex swingarm, ectect..Sorry for the crappy pics took them with my phone, quad is about to receive an overhaul, motor is fresh already, new laker plastics ordered, lsr steering stem,lsr axle, pro tapers and matching rear beadlocks..... will update pics soon but wanted to share so you guys can get an idea of my quad....... Take care



http://i7.photobucket.com/albums/y300/tg413/zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz-16.jpg

http://i7.photobucket.com/albums/y300/tg413/IMAGE_00054.jpg

[Mean250r]

Originally posted by tg413
86, w/ 310 + stroked, Gibson long travel arms, pep triple rates LT , bills pipe, 400ex front calipers, 400ex swingarm, ectect..Sorry for the crappy pics took them with my phone, quad is about to receive an overhaul, motor is fresh already, new laker plastics ordered, lsr steering stem,lsr axle, pro tapers and matching rear beadlocks..... will update pics soon but wanted to share so you guys can get an idea of my quad....... Take care



http://i7.photobucket.com/albums/y300/tg413/zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz-16.jpg

http://i7.photobucket.com/albums/y300/tg413/IMAGE_00054.jpg

Sick bike man! Why do you have those rear tires on there though?!:confused:

[tg413]

I know man lol, they were on the bike when i just recently bought it,Trust me they will be the first to go (cant stand those tires).....I was just working on making sure the suspension and motor were up to snuff, then its on to the cosmetics... Thanks for the compliment..

[tg413]

New wheels, ITP C2 beadlocks w/ holeshot Gncc tires.......

http://i7.photobucket.com/albums/y300/tg413/IMAGE_00071.jpg

[Mean250r]

Originally posted by tg413
New wheels, ITP C2 beadlocks w/ holeshot Gncc tires.......

http://i7.photobucket.com/albums/y300/tg413/IMAGE_00071.jpg

There ya go!:D

Looks alot better boss. :eek2:

[Jerry Prokop]

my R
http://i214.photobucket.com/albums/cc133/JerryProkop/250randBanshee006.jpg
http://i214.photobucket.com/albums/cc133/JerryProkop/250randBanshee005.jpg
http://i214.photobucket.com/albums/cc133/JerryProkop/250randBanshee007.jpg

[my88r]

Originally posted by Jerry Prokop
my R
http://i214.photobucket.com/albums/cc133/JerryProkop/250randBanshee006.jpg
http://i214.photobucket.com/albums/cc133/JerryProkop/250randBanshee005.jpg
http://i214.photobucket.com/albums/cc133/JerryProkop/250randBanshee007.jpg

is that one of bill balances lrd framed Rs.

[Mean250r]

Originally posted by my88r
is that one of bill balances lrd framed R.

i dont think so boss.

[250Renvy]

Originally posted by Jerry Prokop
my R
<img src="http://i214.photobucket.com/albums/cc133/JerryProkop/250randBanshee006.jpg" border="0" width="640" height="480"
</a>
<img src="http://i214.photobucket.com/albums/cc133/JerryProkop/250randBanshee005.jpg" border="0" width="640" height="480"
</a>
<img src="http://i214.photobucket.com/albums/cc133/JerryProkop/250randBanshee007.jpg" border="0" width="640" height="480"
</a>


VERY NICE!!!

Please post some details, especially the front arms(make) and shock lengths. Rear setup, motor setup.

[woodsracer144]

X2 mods list please....

[woodsracer144]

Originally posted by korniev
Just wanted to say BIG BIG BIG thanks to all of you guys who have been posting in this thread for quiet a while! YES, we did in fact reach 100 pages and seriously I never thought this thread would become so famous. But now it is my favourite without any doubts. We have here probably one of the largest collections of R's I ever seen personally. I suppose this thread earned a right to be sticky finally^)
Cheers to everyone!

a sticky sounds great to me!

[Jerry Prokop]

Yes it was his 03 the yellow one mod list
Chassis
LRD attitude no link chassis
Walsh swingarm
Ars Fx A-arms
Axis shocks
roll design stem
prm bumper, skids, and grab bar
ohlins steering dampiner( from street bike
cfm air box
Baldwin hubs
Douglas shamrock beadlocks
rpm axle with anti fade nut
ac pro peg nerf bars
some kind of mamoth radiator (bigest I've seen)
braided brake lines
tag bars
overstzed tank
sidewinder chain and sprocket

Motor
I stll have the 300 resleve that Bill ran but the motor that is in there now is a CT 350 power valve
C-Leigh porting (I don't think porting gets any better)
Full Hinson clutch(basket, preasure plate, inner hub)
CR Rad valve
38 pwk a/s
CT midrange pipe
ESR CR 250 ingition
Lots of compression 250 lbs

I am sure that there is stuff that I am forgetting but you get the jist

[my88r]

i thought is was. i was watching it on ebay. :p NICE R!!!:macho

didnt it have a hinson quick change cover and a full lrd pipe&silencer?

[woodsracer144]

didnt bill ballance say that the 250r was the fastest quad he has ever rode...

[Jerry Prokop]

It has the quick change cover with the 300 motor, I stil have the Lrd pipe, and a CT PV pipe I just like this one. I don't think this was on Ebay I bought it from a guy named Bruce Marshall from indy about a august of 06. About Bill saying that was the fastest R he ever rode, I don't know I never met him. I say him at the Ironman this year but never talked to him.

[TRXNICK]

Since these were taken Ive added a new hood and nerf bars

[TRXNICK]

Other side. Also in process of putting on new radiator shrouds that are polished.

[TheNewn]

Wow its mostly stock and still one of the better looking R's i've seen. Very clean. I'll slap up some pics of mine here soon.

[krazykarl]

my 87' 330R. with a few mods
http://i38.photobucket.com/albums/e145/krazykarl454/Ryard.jpg

the 2 330R's , my boy bill on the trike is a nut, he can hang with all us quad guys. they wer set up for sum nasty black water **** that day
http://i38.photobucket.com/albums/e145/krazykarl454/theRs-1.jpg

heres it hittin a small 40' double at my buddy lucus house
http://i38.photobucket.com/albums/e145/krazykarl454/lucusR1.jpg

sitting next to my old gas gas 300
http://i38.photobucket.com/albums/e145/krazykarl454/RnGG1.jpg

[my88r]

Originally posted by krazykarl
my 87' 330R. with a few mods
http://i38.photobucket.com/albums/e145/krazykarl454/Ryard.jpg

the 2 330R's , my boy bill on the trike is a nut, he can hang with all us quad guys. they wer set up for sum nasty black water **** that day
http://i38.photobucket.com/albums/e145/krazykarl454/theRs-1.jpg

heres it hittin a small 40' double at my buddy lucus house
http://i38.photobucket.com/albums/e145/krazykarl454/lucusR1.jpg

sitting next to my old gas gas 300
http://i38.photobucket.com/albums/e145/krazykarl454/RnGG1.jpg

NICE RS!! :macho i like those gas gas 300s too:macho

[woodsracer144]

Originally posted by krazykarl
my 87' 330R. with a few mods
http://i38.photobucket.com/albums/e145/krazykarl454/Ryard.jpg

the 2 330R's , my boy bill on the trike is a nut, he can hang with all us quad guys. they wer set up for sum nasty black water **** that day
http://i38.photobucket.com/albums/e145/krazykarl454/theRs-1.jpg

heres it hittin a small 40' double at my buddy lucus house
http://i38.photobucket.com/albums/e145/krazykarl454/lucusR1.jpg

sitting next to my old gas gas 300
http://i38.photobucket.com/albums/e145/krazykarl454/RnGG1.jpg

how was the gas gas... was it a nice quad or not really?

[Kirt13]

CT 330r built by Ed Teixeria at Teixeria Tech.
This is just a brand new quad. I started the built with nothing and bought all of the parts needed piece by piece. I bought everything online and had it send to my buddies shop. We put it all together in about 2 weeks. It went from brand new parts all over the floor to a screaming fast quad in just 2 weeks. The only Honda parts on this are the brake calipers and the kickstart. I has a ESR kickstart lever but it didn't work right and took it off.
EVERYTHING is aftermarket from the electrical to the bolts and nuts. I have about $12,000 in it total. I have pics of the original built last year on page, i think around 50 on here. I have done a few things since then.
Enjoy the pics!!

[Kirt13]

2

[Kirt13]

3

[Kirt13]

4

[Kirt13]

5

[Kirt13]

6

[Kirt13]

7

[Mean250r]

Originally posted by Kirt13
7

Not really diggin those lights, but sick *** bike man!!!

Walsh A Arms are bad ***!

[jon370r]

Very nice and I happen to like where the lights are mounted.

[danhung11]

Originally posted by Mean250r
Not really diggin those lights, but sick *** bike man!!!

Walsh A Arms are bad ***!

Very NICE bike!

However, those don't look like Walsh Arms...

Here is a pic of my Walsh front end...

http://i223.photobucket.com/albums/dd228/danhung11/000_0255.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_0294.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_0293.jpg

The set below my bike are Plus 3 LT's and are for sale on eBay...

Those arms look like Laegers. :confused:

[krazykarl]

i liked the gasgas alot. only problem was its on of the earlier ones, with the odd front end, to much caster. so it had stiff steerin, i rode a later one and it was sweet. i was gointo modify the a-arms by puttin a set of heims on the uppers so i can adjust ut the caster, but ended up sellin b4 i had the chance. very reliable, and a smooth powerband,(nothin like my ported 330, its a freakin light switch) and it always got looks where ever i rode.
P.S. - i love seeing all the Rs on here, we're a dieing breed, in my riding group im the only one on an R

[korniev]

Kirt 13 wow that is a sweet one! Thanks for posting it here!!!

[woodsracer144]

yeah i know what your talkin about the 250r dieing... to me the 250r was the best quad built i really wish that they would of kept building it... i think that they should bring it back... i know that it is the time for 4-strokes... but to me a nice build 250r is unstopable... with a good rider on it... my buddys is one of few that are still racin them... he has a full race quad but shes goin down the road now sadly... im gonna pick on up some time soon... once i get some more $$$ i my hands on one but i need to sell a quad...


TO ALL THE GUYS THAT HAVE POSTED PIC'S ON HERE I WANNA THANK YOU THIS IS ON OF FEW THINGS I LOOK FOWARD TO LOOK AT WHEN I COME ON... KEEP IT COMEIN!!!
:)

[danhung11]

:devil:

[danhung11]

:D

[woodsracer144]

what was made over?

[danhung11]

Originally posted by woodsracer144
what was made over?
wheels tires graphics, pegs, fenders, shocks, arms, powdercoating on arms and swingarm....

I know there is a pic of it before makeover posted probably about 30 pages ago...

My new one is coming. I will create a thread.

[RedRider23]

I'm digging it Dan.... looks clean.

[woodsracer144]

Originally posted by danhung11
wheels tires graphics, pegs, fenders, shocks, arms, powdercoating on arms and swingarm....

I know there is a pic of it beofre posted....

o like the red PC... what do you have for a rear shock?

[danhung11]

Originally posted by woodsracer144
o like the red PC... what do you have for a rear shock?

axis shock to be bolted....:confused:

[woodsracer144]

oh i was gona say i have a custom axis if you wanted one... fully adjust. but its a single rate...

[aasco90]

danhung11 nice!!! love the color, love 250r's its amazing they been around for 22 years, here's a action pic of my 10 yearold on his "R" "modified to fit him":macho

[danhung11]

Originally posted by aasco90
danhung11 nice!!! love the color, love 250r's its amazing they been around for 22 years, here's a action pic of my 10 yearold on his "R" "modified to fit him":macho

Thanks!

That is nice that your son will be able to race with that chassis for a while....:devil:

Wait until I reveal pics of my new project. :devil:

[Nac's22]

what i started with

[Nac's22]

As of now it is in the re-build stage.....
re-wire the whole thing b/c who ever did it before did a hack job
new front end= walsh +3 lt with pep zps big bottle 8 clicks
new rear shock= pep dual rate zps
whole new motor lrd top end, lrd pipe
new stem and clamp
black lakers, white frame, white or black lower a arms, white or black uppers, black swinger, red nacs graphics.

what is everyones oppinion on my lowers and uppers? black lowers and white uppers or white lowers and black uppers?

[TRXNICK]

Lets keep this post going strong, and keep our 250r's going!

[TRXNICK]

another

[TRXNICK]

and one more.

[TRXNICK]

last one.

[woodsracer144]

nick are you just ridein around your place with that R?

[mineralgrey01gt]

Originally posted by TRR440EX
As of now it is in the re-build stage.....
re-wire the whole thing b/c who ever did it before did a hack job
new front end= walsh +3 lt with pep zps big bottle 8 clicks
new rear shock= pep dual rate zps
whole new motor lrd top end, lrd pipe
new stem and clamp
black lakers, white frame, white or black lower a arms, white or black uppers, black swinger, red nacs graphics.

what is everyones oppinion on my lowers and uppers? black lowers and white uppers or white lowers and black uppers?

all black upper and lowers, i never cared for the mismatching much unless its chrome uppers

[312R1]

Originally posted by TRXNICK
last one.



Looks really good Nick!!

[TRXNICK]

Woods I've gone on some local poker runs and I have gone to a motocross track here by my house. I think after the weather breaks I will try some more mx. I have to upgrade my suspention first. 312R1 - thanks Steve but it don't look nearly as good as yours. Someday it will.

[havinnoj]

Lets make this a sticky....

I thought I posted already but I couldn't find it. These are my 2. The first one is a 76mm pro-x with 4mm crank. LLSR frame. Everything polished, chromed, or zinc plated. It's in pieces now doing some dyno work and getting a pro-trax front end.

http://www.planetsand.com/memberphotos/58021-n19711450_32474718_2026.jpg

http://www.planetsand.com/memberphotos/58024-n19711450_32474724_3866.jpg

http://www.planetsand.com/memberphotos/58025-n19711450_32474725_4168.jpg

http://www.planetsand.com/memberphotos/58027-n19711450_32474728_5086.jpg

This one is a 72mm pro-x. A little more basic. Needs some chassis components -- it's jealous.

http://www.planetsand.com/memberphotos/58028-n19711450_32474726_4473.jpg

http://www.planetsand.com/memberphotos/58029-n19711450_32474720_2663.jpg

http://www.planetsand.com/memberphotos/58030-n19711450_32474723_3564.jpg

[TRXNICK]

That first one is really cool!:eek2: The second one is nice also.

[my88r]

time make this a sticky. NICE RS!!!!:macho

[woodsracer144]

i think it should been a sticky at page 15.... nice duners! do you crack the chassies on those easy out there?

[k265r]

what pipes are you running?

[havinnoj]

both have sparks tt

[TheNewn]

Here's my little War Pony

A quick before

http://i226.photobucket.com/albums/dd170/TheNewn/DSC00351-1.jpg

And After

http://i226.photobucket.com/albums/dd170/TheNewn/DSC00373.jpg


I was in a hurry at the time, (it was butt cold outside) so i'll get some better pics later.

[kiesta00]

Nothin Fancy

http://i70.photobucket.com/albums/i106/kiesta00/Martin%20Beach%2012-29-07/SideView.jpg

http://i70.photobucket.com/albums/i106/kiesta00/Martin%20Beach%2012-29-07/SideView2.jpg

My cousin's 4mm cub in the back
http://i70.photobucket.com/albums/i106/kiesta00/Martin%20Beach%2012-29-07/SideView3.jpg

I wish I had this 370r
http://i70.photobucket.com/albums/i106/kiesta00/Martin%20Beach%2012-29-07/370r.jpg

[tg413]

Nice rides.....

[4traxed]

A few nostalgic shots from my past
Dumont in '86
http://i119.photobucket.com/albums/o131/4trax_photo/Dennistilted.jpg
Dumont in '86
http://i119.photobucket.com/albums/o131/4trax_photo/Fourtrax.jpg
Christmas in '86
http://i119.photobucket.com/albums/o131/4trax_photo/Stylin.jpg
Pismo in '87
http://i119.photobucket.com/albums/o131/4trax_photo/Air.jpg
Fluorescent was cool in '87
http://i119.photobucket.com/albums/o131/4trax_photo/10-15-200507.jpg

[beobe99]

SOOO classic... I love it!!


Originally posted by 4traxed
A few nostalgic shots from my past
Dumont in '86
http://i119.photobucket.com/albums/o131/4trax_photo/Dennistilted.jpg
Pismo in '86
http://i119.photobucket.com/albums/o131/4trax_photo/Fourtrax.jpg
Christmas in '86
http://i119.photobucket.com/albums/o131/4trax_photo/Stylin.jpg
Pismo in '87
http://i119.photobucket.com/albums/o131/4trax_photo/Air.jpg
Fluorescent was cool in '87
http://i119.photobucket.com/albums/o131/4trax_photo/10-15-200507.jpg

[4traxed]

Originally posted by beobe99
SOOO classic... I love it!!

Thanks.

It'll be nice to have an R once again, can't wait.
I'm trying to trade into this.
http://i119.photobucket.com/albums/o131/4trax_photo/1014071215b.jpg

[tg413]

That R looks pretty mean...


Those ol school shots are so cool, i remember being a kid when the first R (TRX) came out.... My neighbor had one ,used to do crazy stunts on it all the time and we would try to keep up on our little 50's ....He had his friends open the doors to sears and rode it in one side and out the other lol :devil: ......


Ahh the memories...

[tg413]

P.s i need to go to the desert one of these days, it just looks like so much fun....Camping out, riding just having a good time ....

[Fordtrax]

Yeah them sand dunes look like alot of fun!!!
One of these days i need to make a trip out west to Glamis!!!

[lbz#7]

Originally posted by lbz#7
my 250r i miss u

[tg413]

Here's my quad with the new fullbores, new used hetrick pipe, and some new beadlocks w/ holeshot gncc's on the rear....
Have but not put on yet...The laeger steering stem w/ pro tapers, my new laegers swingarm, rpm millennium bearing carrier and rpm dominator axle and hubs....
I'll update as i go but I'm liking the way its starting to look so far.....


http://i7.photobucket.com/albums/y300/tg413/IMAGE_00089.jpg

[woodsracer144]

Originally posted by tg413
Here's my quad with the new fullbores, new used hetrick pipe, and some new beadlocks w/ holeshot gncc's on the rear....
Have but not put on yet...The laeger steering stem w/ pro tapers, my new laegers swingarm, rpm millennium bearing carrier and rpm dominator axle and hubs....
I'll update as i go but I'm liking the way its starting to look so far.....


http://i7.photobucket.com/albums/y300/tg413/IMAGE_00089.jpg

hey what are you runin got a-arms and front shocks?

[1trik88]

first post here ever...

my newest purchase... cant wait till the weekend to go ride it for the first time!!! WOOOHOOO! First 250r i have ever owned or even riden...

[TheNewn]

Wow, congrats on that buy. Looks like a very nice quad, good starting point.

let us know how you like it.

[1trik88]

yes sir... i will

[TRXNICK]

That is a sweet lookin quad!:macho You have to post up some more pics of that bad boy! Give us the dibs on it don't leave us hangin.

[criminalpoet]

Originally posted by 4traxed
A few nostalgic shots from my past

Man those are some of the coolest R pics that I have seen in a while! The 250r is such a timeless piece! You should make posters out of some of those old shots.

[TheNewn]

Just a little thing to throw out there guys...When you quote someone...please delete all the pictures they put up. and only use their words...

Its kind of annoying to have to scroll through all the same pictures over and over again to read 4 words. And its just that more some people with slow internet have to download.

food for thought...

[criminalpoet]

There ya go man, that outta drop you down a couple of levels on your blood pressure lol, at least from hypertension to prehypertension.

[312R1]

My Laeger Pro-trax..:devil:

[312R1]

pic #2

[312R1]

#3

[312R1]

#4

[312R1]

Last one for now...I'll post more when it's 100% finished.

[TRXNICK]

All I can say is WOW! Man Steve that thing looks awesome! Beats the last time I saw it for sure. Now get it 100% done and then lets go racin! I'll call you during the week.

[tg413]

Originally posted by woodsracer144
hey what are you runin got a-arms and front shocks? Gibson long travel arms, with pep triple rate shocks....

[tg413]

Oh and Steve that thing is Nasty man....Over the top for sure, nice job........

[312R1]

Originally posted by TRXNICK
All I can say is WOW! Man Steve that thing looks awesome! Beats the last time I saw it for sure. Now get it 100% done and then lets go racin! I'll call you during the week.


Thanks bro...It's apart again..lol

Are you planning on going to motorama?

[my88r]

edit

[my88r]

edit

[450rJam]

that is one crazy long silencer, what is it ?

[woodsracer144]

Originally posted by 450rJam
that is one crazy long silencer, what is it ?

a pro circut 295?

[my88r]

Originally posted by woodsracer144
a pro circut 295?

yep. its a quiet silencer and spark arrestor. i like to keep the trails open.:macho

[tg413]

Nice R man......
Here's some updated pics of mine after i installed the laeger swinger, rpm axle w/ hubs, rpm bearing carrier,full bore fronts maier rear, hetrick pipe and silencer, new rear beadlocks with holeshots, laegers steering stem, tag t2's, power mad handgaurds, RTC easy pull clutch lever, and a couple other things..... It already had the gibson long travel arms, with the pep shocks, 310 stroke kit when i bought it.., Not done yet but the progress is starting to show i think..........

http://i7.photobucket.com/albums/y300/tg413/zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz-19.jpg
http://i7.photobucket.com/albums/y300/tg413/zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz-20.jpg
http://i7.photobucket.com/albums/y300/tg413/zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz-21.jpg

[4traxed]

Originally posted by Fordtrax
Yeah them sand dunes look like alot of fun!!!
One of these days i need to make a trip out west to Glamis!!!


Originally posted by tg413
P.s i need to go to the desert one of these days, it just looks like so much fun....Camping out, riding just having a good time ....

Man both of those post made me feel so lucky...
Dumont,Glamis,Pismo all are 3hr trips or less for me.
If you've never rode an ATV in the dunes, you're really missing out, IMO.:bandit:

[New450r]

I see a lot of you put us 4 stroke riders down I love both but I have been screwed buy 2 many people to buy another used bike and I just wanted something new for a change. I say f**k the emition laws ride hard ride red.

[woodsracer144]

Originally posted by New450r
I see a lot of you put us 4 stroke riders down I love both but I have been screwed buy 2 many people to buy another used bike and I just wanted something new for a change. I say f**k the emition laws ride hard ride red.

yeah.. with respect i say this you have your opion... but IMO i think that alost of us 2-stroke rides all get shut out and stuff people sayin that is a time for a change with the 4-stroke... and alot of use just wanna keep the 2-stroke so we just say it... thast how it is for me...

but like you said we both ride so ride hard...

[Johnny Minehan]

mine right after my rebuild ... only ridden it one weekend, rolled it a few times, needs new steering stem, bars, possibly a arms:(
http://a870.ac-images.myspacecdn.com/images01/5/l_0ed5918004a7d82169ead7f7e0240a0d.jpg
http://a494.ac-images.myspacecdn.com/images01/119/l_871b16ecbcf589d864d6a427f53f3165.jpg
http://a457.ac-images.myspacecdn.com/images01/100/l_2313fb13048885bba57c5b183c1b72d0.jpg
http://a834.ac-images.myspacecdn.com/images01/128/l_271ea42e79cbfaabfe911eb9d5d0bc89.jpg

[Tubsy]

heres my 89 250r (265pv)
http://i32.photobucket.com/albums/d9/tmac17/Picture001.jpg
http://i32.photobucket.com/albums/d9/tmac17/PICT0046.jpg
http://i32.photobucket.com/albums/d9/tmac17/Picture003-1.jpg
http://i32.photobucket.com/albums/d9/tmac17/Claytons-2.jpg
http://i32.photobucket.com/albums/d9/tmac17/Picture002.jpg

[4traxed]

Originally posted by criminalpoet
Man those are some of the coolest R pics that I have seen in a while! The 250r is such a timeless piece! You should make posters out of some of those old shots.

I wish I would've taken better care of those pic's, the quality is no where near poster quality.

A few more.

Me.

http://i119.photobucket.com/albums/o131/4trax_photo/Denniscrossedup.jpg

Kenny
http://i119.photobucket.com/albums/o131/4trax_photo/Kenny.jpg
http://i119.photobucket.com/albums/o131/4trax_photo/KennyBottomed.jpg

If these three wheeler photo's are inappropriate for this R thread just say so,and I'll delete them or a mod can.

Dad's 350X
http://i119.photobucket.com/albums/o131/4trax_photo/350x.jpg

Me at about age 13. Sorry again safety police, for not having my boots on.

http://i119.photobucket.com/albums/o131/4trax_photo/Bermshot2.jpg

http://i119.photobucket.com/albums/o131/4trax_photo/Bermshot.jpg

http://i119.photobucket.com/albums/o131/4trax_photo/Wheelie.jpg

[Flynbryan19]

The no riding boots is no big deal. The no helmet pic needs to go though.

[4traxed]

Done.

[Ricchezza]

Originally posted by tazman7
more

how much did the whole set up cost you?

[doc-bones]

Bad A** WALSH RACECRAFT!

[doc-bones]

Sick A** R

[doc-bones]

For all you R lovers...... Hope you enjoyed them.

[Cr85rRida]

doc!!!!:eek: :eek: :eek: :eek: :eek:

[danhung11]

Originally posted by Cr85rRida
doc!!!!:eek: :eek: :eek: :eek: :eek:

Nice doc! Can we get one of the two sides about 10ft away? I wanna see the entire thing... :ermm:

Cha-ching....:devil:

[Tubsy]

jeez doc, im likin the bling

[woodsracer144]

Originally posted by doc-bones
For all you R lovers...... Hope you enjoyed them.

a mods list also?!?! thats a sick R

[havinnoj]

Doc - your bike is looking real good! i

JW- is your axle stock?

[pdxbigfoot]

Truly a inspiring build! Im at the point on my build where it almost consumes your life and can get really discouraging at times. Just seeing those few pics lit a fire under my *** and im heading to the shop......Thank you!!

[jon370r]

Doc, is that the one your taking out to Glamis in Feb? I want to know who to look out for.

I'm sure you have all seen plenty pics of mine but here it is again.

[doc-bones]

Jon,
No, I have 2 machines that I store out there. I am so tempted to bring one of my R`s. Maybe next time.
Here is side pics.
Doc

[doc-bones]

Jon,
Looking forward to seeing your 401!
One more pic....

[danhung11]

Thanks for the puddle of drool on my keyboard...:p

I am half tempted to keep my Walsh Arms and Swingarm for a full Walsh Racecraft Build....

Be safe in Glamis! Is it true that there are gangs that hang out in the dunes and take your quad at gunpoint or are those rumors? :ermm:

[250r4life]

Originally posted by danhung11
Thanks for the puddle of drool on my keyboard...:p

I am half tempted to keep my Walsh Arms and Swingarm for a full Walsh Racecraft Build....

Be safe in Glamis! Is it true that there are gangs that hang out in the dunes and take your quad at gunpoint or are those rumors? :ermm:

no... that isnt true...

comp hill used to get pretty crazy back in the day, but its nothing like it used to be...

the dunes are patrolled...

[danhung11]

Originally posted by 250r4life
no... that isnt true...

comp hill used to get pretty crazy back in the day, but its nothing like it used to be...

the dunes are patrolled...

Thanks! We have concemplated that drive out there but 27 hours is kind of unreal to ride.

They only sand dunes that we ride in are in Waynoka, OK "Little Sahara State Park". It is roughly 1700 acres and has trails, big dunes, drags, etc. Fun place. It is a pretty much no holds barred on the dunes. The only time patrol is out on the dunes is when someone needs to be escorted off on a ambulance-buggy. :(

[woodsracer144]

Originally posted by doc-bones
Jon,
No, I have 2 machines that I store out there. I am so tempted to bring one of my R`s. Maybe next time.
Here is side pics.
Doc

where did you get those rubbers? i cant find them anywhere?| that is a really sick R

hey jon did you sell that 400 motor that you had? or what ever you had listed on e-bay? what are the Hp on that? nice quad... this post i hate... i wanna but a truck but every time you guys post another sick quad i go back to lookin at quads to buy one. and its buggin me... oh welll have to dream for a little while...
nice rides every one!

[doc-bones]

Glamis used to be crazy with gangs. Not anymore...... Last February we headed over to OLDS on Pres weekend with about 40 guys in same long sleeve white shirts with logos to remember a friend who died on trip year before. Took about 1/2 hour for BLM to think we were a gang and they surrounded us at gunpoint and kicked us out! They do not put up with any crap anymore. It is relatively safe these days.
The rubbers must be ordered from Honda or Ronnies. Stock Ohtsu Radials are still my favorite except if terrain is Rocky!

[norcalduner]

Although not as sick as doc-bones or jon370r:( , here is mine anyways.

[Mean250r]

Originally posted by norcalduner
Although not as sick as doc-bones or jon370r:( , here is mine anyways.

idk whats ur talkin about boss, that R looks legit.

[Mean250r]

Originally posted by norcalduner
Although not as sick as doc-bones or jon370r:( , here is mine anyways.

idk whats ur talkin about boss, that R looks legit.

[beobe99]

norcalduner that thing is very proper.. just a tad dusty. some Powder coat and graphics will put you right next to the best!!!

[danhung11]

Originally posted by beobe99
norcalduner that thing is very proper.. just a tad dusty. some Powder coat and graphics will put you right next to the best!!!

Nicely put... I know for a fact that CT Racing still has the RED Graphics Kit that would set that bike off...

Candy White Frame with Fire Truck Red components would be off the hook! :devil:

Just my $.02. ;)

Nice bike though....what

[banshee84]

Originally posted by norcalduner
Although not as sick as doc-bones or jon370r:( , here is mine anyways.

very nice man

[buildinitnow]

This sweet ride is also for sale gentleman. http://www.exriders.com/vbb/showthread.php?s=&threadid=322790

[395Rider]

Originally posted by trx250rkid
heres mine before tear down
http://i42.photobucket.com/albums/e314/trx250rkid/250r%20pics/IMG_0574.jpg

http://i42.photobucket.com/albums/e314/trx250rkid/250r%20pics/IMG_0573.jpg

http://i42.photobucket.com/albums/e314/trx250rkid/250r%20pics/250r.jpg


and here it is as of right now
http://i42.photobucket.com/albums/e314/trx250rkid/250r%20rebuild/IMG_1463.jpg

I'm getting ready to break my bike down for a powder coating, and I cant decide which color to choose! I seen your bike on a blue frame and I said, Oh Yeah! Thats it! Then I seen the frame in white. My bike is going to keep the original gold a-arms and swingarm, and it has a blue gas tank, blue duncan racing seat and white maier fenders. What color do your recomend? What do you think of getting the a-arms and swing arm powder coated blue or white also?
Adam

[woodsracer144]

i would say if you had a red tank to fo a trans red.. but since its blue do trans blue! and then i would pick up some sick but some what simple graphics, like on the white and trans blue? walsh R a bit up. but any way, i would say trans blue and then if the a-arms are scuffed up alot do a gold again or do every thing trans blue and then have the upper a'arm white and the swinger white,
IMO and 2 cents.

[pimpt250r]

I went with this
http://i30.tinypic.com/x6k5g0.jpg
let me know what ya think of the color scheme swing arm is the same blue
http://i32.tinypic.com/2v9rjg3.jpg

[woodsracer144]

thats a different color green! any one have a chart of the colors that you can get or a site?

[pimpt250r]

www.columbiacoatings.com
www.roseyspowdercoating.com
theres a good spread of colors out there

[woodsracer144]

i really like this
http://roseyspowdercoating.biz/osCommerce/catalog/product_info.php?cPath=29&products_id=87

can you use this on a truck? sorry about this... just a quick Q, thanks!

thats the color of red i was talkin about befor.

[mineralgrey01gt]

awesome green, you gonna run the new green plastics from fullbore?

[mineralgrey01gt]

awesome green, you gonna run the new green plastics from fullbore?

[pimpt250r]

would like to but danhung beat me to it + my green fenders are only a yr old

[woodsracer144]

are you running a blue stem? with the a-arms and swinger?

[pimpt250r]

running a chrome stem and axle ,polished wheels and other misc peices are polished
I'll have more pics once its assembled

oh as to your question on the candy red you can get that color in a wet paint (enamal,acrylic ,etc ) it will be way easier to accomplish its a top coat ,which means you need a silver /white /chrome basecoat

[395Rider]

Originally posted by pimpt250r
I went with this
http://i30.tinypic.com/x6k5g0.jpg
let me know what ya think of the color scheme swing arm is the same blue
http://i32.tinypic.com/2v9rjg3.jpg

very Very nice color scheme! That is freaking top noch! Thanks for the good idea!

[395Rider]

Originally posted by woodsracer144
i would say if you had a red tank to fo a trans red.. but since its blue do trans blue! and then i would pick up some sick but some what simple graphics, like on the white and trans blue? walsh R a bit up. but any way, i would say trans blue and then if the a-arms are scuffed up alot do a gold again or do every thing trans blue and then have the upper a'arm white and the swinger white,
IMO and 2 cents.

That sound like a good plan! That would look awsome when I picture it! Now I am going to run into the garage and tear it apart! Thanks for the idea!

[woodsracer144]

POST US SOME PICS! lol

[395Rider]

For sure!

I'm going to get a couple of cracks welded tomorrow, and also take it in for the powder! There is a place in the City of Orange called Orange County Powder Coaters that will do it for 100 bucks!

Sucks that I'm selling it, but I'll have working on it!

[pimpt250r]

I have a few more things to button up and will get more posted as well

[xtremelimit]

http://i164.photobucket.com/albums/u35/fisrus/SCAN0001.jpg

[xtremelimit]

http://i164.photobucket.com/albums/u35/fisrus/SCAN0004.jpg

[450rJam]

nice xtremelimit

I really like the clean look, nice R

[dustinshuler]

I was wondering if some one could go retreive a pic from the first page of the for sale section of my old white leager lrd 250r and put it in this thread I think it looked pretty good. It would be appreciated in here I think.

thanks,

[danhung11]

Originally posted by pimpt250r
would like to but danhung beat me to it + my green fenders are only a yr old

No harm bud... just saw this and it was an impulse. :devil:

http://i223.photobucket.com/albums/dd228/danhung11/000_0304.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_0303.jpg

They literally glow in my garage. It is like Kryptonite. :D

Have you seen the **** Tech CF Hood for Full Bores? Thanks Andy! ;)

Anyways...good luck with the build. The colors on my bike are going to be absolutely breathe taking. Has anyone seen the translucent colors from Columbia Coatings? How do they look?

I picked up a box full of freshly chromed parts from the plating place last night. I will order my powder in and I plan to have the powdercoating done by next weekend. :D

I can't wait. The only thing else I need really is a seat and my Rear Hipers with Green Rings with a full set of Razr II's.

It's all coming together....

[Mean250r]

Originally posted by dustinshuler
I was wondering if some one could go retreive a pic from the first page of the for sale section of my old white leager lrd 250r and put it in this thread I think it looked pretty good. It would be appreciated in here I think.

thanks,

This is THE nicest 250r in this whole thread!!! Holy crap bro, no joke if u didnt sell it, i would of bought it.

[danhung11]

Originally posted by Mean250r
This is THE nicest 250r in this whole thread!!! Holy crap bro, no joke if u didnt sell it, i would of bought it.

This is a bold statement in my opinion... :huh

There is a TON of "nice" 250R's in here.

Have you seen doc's full Walsh Racecraft Bike? :ermm: page 35...

Not to take anything away from this Laegers.

Just my $.02. :D

[Dougy_Fresh22]

Just picked it up for dirt cheap!:D

http://i52.photobucket.com/albums/g16/szewczyd/HPIM0393.jpg

http://i52.photobucket.com/albums/g16/szewczyd/HPIM0395.jpg

[dustinshuler]

regarding danhung on my leager I agree, even though it was mine there are some really awsome 250rs in this thread I just hope we can keep them coming and hit 200 pages.

[woodsracer144]

Originally posted by Dougy_Fresh22
Just picked it up for dirt cheap!:D

http://i52.photobucket.com/albums/g16/szewczyd/HPIM0393.jpg

http://i52.photobucket.com/albums/g16/szewczyd/HPIM0395.jpg

hey, if you wouldnt mind tellin what is the price you paied? thanks... you dont have it i just wanted to know becasue that is pimped! fatty style.

[Mean250r]

Originally posted by danhung11
This is a bold statement in my opinion... :huh

There is a TON of "nice" 250R's in here.

Have you seen doc's full Walsh Racecraft Bike? :ermm: page 35...

Not to take anything away from this Laegers.

Just my $.02. :D

Sorry about that boss, let me rephrase that....

IN MY OPINION This is THE nicest 250r in this whole thread!!!

:devil: :rolleyes:

[my88r]

Originally posted by Mean250r
Sorry about that boss, let me rephrase that....

IN MY OPINION This is THE nicest 250r in this whole thread!!!

:devil: :rolleyes:

:rolleyes:

[450rJam]

I may be able to limit it to a top 10 or 20 but to pick one would be pretty hard to do.......................

everyone has diff taste, some like the totally modded out, some like the fastest in a straight line, and some like the mx builds best

this is one heck of a collection of the most popular atv ever made

[Rip_Tear]

Are there any more pics of dustinshuler 250R?

[312R1]

Originally posted by Rip_Tear
Are there any more pics of dustinshuler 250R?

Here are the pic's.


http://i236.photobucket.com/albums/ff28/dustinshuler/HPIM1669.jpg
http://i236.photobucket.com/albums/ff28/dustinshuler/HPIM1666.jpg
http://i236.photobucket.com/albums/ff28/dustinshuler/HPIM1682.jpg
http://i236.photobucket.com/albums/ff28/dustinshuler/HPIM1675.jpg
http://i236.photobucket.com/albums/ff28/dustinshuler/HPIM1671.jpg

[450rJam]

got any from the other side?

[doc-bones]

My old Laeger Protrax.....

[doc-bones]

Old Jerimiah Jones LRD 265 PV....

[312R1]

Originally posted by 450rJam
got any from the other side?


Here is one.
http://i236.photobucket.com/albums/...er/HPIM1669.jpg

[woodsracer144]

Originally posted by doc-bones
Old Jerimiah Jones LRD 265 PV....
do you still ahve that R?

[doc-bones]

Here is a nice display of R`s a few weeks ago. We take our R`s seriously!! Still the best machines out there!!! The Roll Design hanging 2nd from left is my other R.

[Tubsy]

^^ where am i in this pic :confused:

[dustinshuler]

THER WILL NEVER BE ANOTHER QUAD LIKE THE 250R IN MY OPINION. BTW I AM FRIENDS WITH JERIMIAH AND THE LRD MOTOR IN THE WHITE LEAGER WAS ALSO HIS AS IS THE 330PV SPARKS THAT IS IN MY OTHER LEAGER THATS IN THE 4-SALE SECTION RIGHT NOW. HE ALWAYS HAD THE NICEST STUFF AROUND.

[norcalduner]

Originally posted by doc-bones
My old Laeger Protrax.....

Hey Doc ..... you have got the best R's in this forum bar none. I would only want to know where do you find these.

[korniev]

Originally posted by 312R1
Here are the pic's.


http://i236.photobucket.com/albums/ff28/dustinshuler/HPIM1669.jpg
http://i236.photobucket.com/albums/ff28/dustinshuler/HPIM1666.jpg
http://i236.photobucket.com/albums/ff28/dustinshuler/HPIM1682.jpg
http://i236.photobucket.com/albums/ff28/dustinshuler/HPIM1675.jpg
http://i236.photobucket.com/albums/ff28/dustinshuler/HPIM1671.jpg

WOW this R is definitely on of the top 10 of this thread.....
Thanks for posting!

[Cr85rRida]

Originally posted by Mean250r
Sorry about that boss, let me rephrase that....

IN MY OPINION This is THE nicest 250r in this whole thread!!!

:devil: :rolleyes:

:o

[Mean250r]

Originally posted by Cr85rRida
:o

:muscle:

[Mean250r]

Originally posted by Cr85rRida
:o

:muscle:

[woodsracer144]

Originally posted by doc-bones
Here is a nice display of R`s a few weeks ago. We take our R`s seriously!! Still the best machines out there!!! The Roll Design hanging 2nd from left is my other R.


holy R's! thats sweet! is that a berm mad from scrach? like not built with a skider or something?

[450rJam]

sucks to have to go to another site to see a pic, just to find out you must register/log in bla bla bla


post the pic on the tread if you want to share it

just my .02

[88redrocket]

Just picked this up the other day


http://i88.photobucket.com/albums/k179/donovan51084/IMG_0767-1.jpg

[JohnBeton]

Here is my '87 TRX250r, this is how I bought it (for a very small price). Soon I'm going to give it a restoration (new a-arms instead of the plates that are now used, powdercoating all over, lrd pipe on it, ... ...):

http://img150.imageshack.us/img150/6561/1000809fq5.jpg

(the fenders are red, not orange, the sun was shining to bright ;))
http://img100.imageshack.us/img100/5042/1000802fi1.jpg

[Trxman300]

Originally posted by GOTFEAR
Good i hate when riders wear a helment and no boots just dont understand it

i have a full gear ( gloves helmet goggle jersy pants shest protector but i dont wear the boots, i dont like em =/ i wear hunting/hikinbg boots with high ankle.

[my88r]

edit

[my88r]

edit

[my88r]

edit

[woodsracer144]

Originally posted by my88r
skids

hey are you XC racing this? if you are you should swing up by WI and do a few D23's.
nice R

[Rcrazy]

Dont know if the pic is gonna work but i'll give it a shot. Here's my pride and joy.

[timmersam]

Originally posted by exrider008
lets see if u 250r guys can beat us 400ex guys! 46 pages!
http://www.exriders.com/vbb/showthread.php?s=&threadid=134764&perpage=15&pagenumber=1

I found this when I was looking through the old pictures, I thought that id rub it in now that there only at 68 pages. :D

[my88r]

Originally posted by timmersam
I found this when I was looking through the old pictures, I thought that id rub it in now that there only at 68 pages. :D

LOL!!! and where at 114 now:cool:

[dunatic]

Did I post these yet ?

There are so many pages I cant find mine if I did.

Hope you enjoy

http://img.villagephotos.com/p/2006-6/1193082/Dsc00445.jpg

http://img.villagephotos.com/p/2006-6/1193082/Dsc00452.jpg

http://img.villagephotos.com/p/2006-6/1193082/Dsc00453.jpg

http://img.villagephotos.com/p/2006-6/1193082/Img_0101-sml.jpg

http://img.villagephotos.com/p/2006-6/1193082/Img_0112-sml.jpg

http://img.villagephotos.com/p/2006-6/1193082/Img_0117-sml.jpg

http://img.villagephotos.com/p/2006-6/1193082/Img_0115-sml.jpg

http://img.villagephotos.com/p/2006-6/1193082/Img_0113-sml.jpg

http://img.villagephotos.com/p/2006-6/1193082/Img_0119-sml.jpg

[dunatic]

oppps

[bushwesl]

Dunatic, What do you have for engine mods? Sick R by the way.

[800screws]

not sure if this counts but it's close! jp lt250r/500, laeger t pin front end, trx250r rear link, lt500 engine....

[800screws]

2
250r geometry...

[800screws]

3.
it's being shipped monday, i cannot wait to show up at the track with this thing! people are going to be like WTF!!

[my88r]

800 you found one!!!!:macho


ps hows huevous 10:)

[dunatic]

Originally posted by bushwesl
Dunatic, What do you have for engine mods? Sick R by the way.

its a 503cc saber on gas
95mm bore
72mm stroke (stock length) with billet crank
CR 500 rod
48mm x 55mm CPC billet carb, dual floats
Dyna Ign
Shearer pipe
AFCO radiator

bike weighs right at 300 lbs full of fuel

[800screws]

yup finally! i actually found 2 full laeger pro trax lt250rs, but they were both showroom quads now. i didn't even haggle when i was contacted about this...i said how much and ship it!
#10 isn't as good as 9...but it gets me through the winter!

[pdxbigfoot]

I was fortunate enough to get to drool over that bike for about a hour. Thank you again fot the chrome motor mount and wait till you see my build (i know ive been saying that for 9 months now....but its real close)....enjoy!!...Jason

[speedfreek]

310 ESR, 8.6sec 1/8mi http://i90.photobucket.com/albums/k264/pnewell44/000_0769.jpg

[312R1]

Update pic of my Laeger Pro-Trax R.

[dunatic]

Originally posted by pdxbigfoot
I was fortunate enough to get to drool over that bike for about a hour. Thank you again fot the chrome motor mount and wait till you see my build (i know ive been saying that for 9 months now....but its real close)....enjoy!!...Jason

when you gonna bring that thing out and let her run a bit ???

[pdxbigfoot]

she will be done for the ATV expo in PDX the 1st week in May...at the very latest. Roller is almost complete and Jeff is detailing the motor. It will be used for Knuckleheads centerpiece along with Travis's Banshee...see you there...j

[dunatic]

post up some progress pics in the meantime

[bigdaddy_chaos]

ok here is my R fresh out of the shop

http://i228.photobucket.com/albums/ee31/bigdaddy_chaos/PHOT0009.jpg

http://i228.photobucket.com/albums/ee31/bigdaddy_chaos/PHOT0008.jpg

http://i228.photobucket.com/albums/ee31/bigdaddy_chaos/PHOT0007.jpg

http://i228.photobucket.com/albums/ee31/bigdaddy_chaos/PHOT0006.jpg

[dunatic]

good lookn "R"...is that a PSI pipe and LRD silencer ?

[bigdaddy_chaos]

its a bills pipe with a LRD muffler ..... it had the whole LRD exhaust but i run too much woods riding for that

[JM317]

A few shots of my stock framed 86 265R, I got this back in the summer and have been going through the entire thing. I just finished a complete rebuild this last week, all I need to do is mount my skids.
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads045.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads046.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads057.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads055.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads053.jpg

[JM317]

A few shots of my stock framed 86 265R, I got this back in the summer and have been going through the entire thing. I just finished a complete rebuild this last week, all I need to do is mount my skids.
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads045.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads046.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads057.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads055.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads053.jpg

[JM317]

A few more...
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads054.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads048.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads049.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads050.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads056.jpg

[450rJam]

thats pretty bad *****

what are the red plastic things just above the pegs on the frame?

[woodsracer144]

Originally posted by JM317
A few more...
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads054.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads048.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads049.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads050.jpg
http://i45.photobucket.com/albums/f82/Jaredmalone123/quads056.jpg

dude that is sick as hell! i wish i had a ride like that...

[JM317]

Originally posted by 450rJam
thats pretty bad *****

what are the red plastic things just above the pegs on the frame?
Those are frame guards that Maier makes, I think they're really hard to come by nowadays or at least that's what Trenga Racing told me. I have a bad habit of trashing my plastic and frame from wearing boots when I ride so I thought they would help.

[my88r]

Originally posted by JM317
Those are frame guards that Maier makes, I think they're really hard to come by nowadays or at least that's what Trenga Racing told me. I have a bad habit of trashing my plastic and frame from wearing boots when I ride so I thought they would help.


that explains the grip tap.lol NICE R!!!!

[JM317]

Originally posted by my88r
that explains the grip tap.lol NICE R!!!!
Yeah, that's actually a textured vinyl that a guy on ebay sells in rolls. It's not abrasive like sandpaper so it doesn't scuff anything. Works great!

[800screws]

this might sound silly, but is that how u mount powermadds? or are your mounts upside down?