Surrounding Spar Technology (SST) G2 Frame
The Renegade 800R uses the next generation and industry-exclusive Surrounding Spar Technology (SST) G2 chassis from BRP. The welded-steel SST G2 frame offers increased structural integrity, improved durability and precision handling. The SST G2 design offers also increases strength, provides a lower center of gravity, improves handling and requires far less components, materials and welds than a traditional tube frame. The SST G2 frame also stronger torsional stiffness to more properly meets the high expectations of the end user for both work and play.
Double A-arm front suspension with dive-control geometry
The Renegade retains its race-proven double A-arm setup and uses five-way preload HPG shocks. Front-end suspension travel is 9 inches (22.9 cm). Dive-control geometry tightly controls the roll-center, especially when entering corners. The setup also inspires confidence, reducing kickback to the operator by locating the knuckle in the wheel.
Trailing Torsional Independent (TTI) rear suspension
The TTI, which offers 75 percent less moving parts than competitive systems, was designed to eliminate scrub and camber changes when the suspension moves up and down and keep the quad in straight line. Unique to Can-Am, the proven Torsional Trailing arm Independent (TTI) rear suspension offers increased rigidity and 9.3 inches (23.6 cm) of travel. A removable external sway bar and lower pivot points improve geometric squatting to improve traction and the transferring of power to the ground.
FOX HPG shocks, front and rear
The standard Renegade 800R wears preload-adjustable high-pressure gas (HPG) shocks, front and rear, with a specific calibration to soak up both high- and low-speed bumps and keep the ride smooth.
Visco-Lok front differential
The progressive auto-locking Visco-Lok‡ front differential is unique to the ATV industry. The innovative system constantly monitors front wheel speed and, if it detects one wheel spinning more quickly than the other, it progressively sends additional power to the wheel with better traction. Wheel hop or driveline wind-up is also eliminated to keep the system transparent to the operator. It’s also a fully locking design, which means no need for either a rev or speed limiter. Visco-Lok QE (Quicker Engaging) is available on the Renegade X xc.
214mm hydraulic disc brakes
The front setup uses two large 214mm disc brakes with twin-piston calipers for superior stopping power. At the rear, the models use two, twin-piston caliper and 214mm hydraulic disc brakes. The system also includes separate front and rear hand brake levers for optimal control.
12-inch (30.5 cm) cast-aluminum wheels
The base Renegade 800R model has innovative computer-optimized wheels. A center-less wheel design reduces unsprung weight but offers improved strength. Durability increased in strategic areas while excess material was eliminated in other areas to save weight.
25-inch (66cm) ITP Holeshot ATR tires
This versatile tire provides proven, all-around trail performance and impressive traction. |