Results 1 to 5 of 5

Thread: 400ex stock wheel size

  1. #1
    Join Date
    Jul 2009
    Location
    PA
    Posts
    577

    400ex stock wheel size

    what is the wheel size for a stock 400ex, im confused as to what size to get. Thanks
    Don't Tread On Me

  2. #2
    Join Date
    Apr 2005
    Location
    WI
    Posts
    8,778
    10 inch front and 9 inch back for wheels. 20x10x9 rear tires and 22x7x10 front tires. steve
    Screw it... after a half hour of trying it just isnt worth jacking with a sig.

  3. #3
    Join Date
    Sep 2005
    Location
    Suring Wisconsin
    Posts
    5,448
    The fronts are 10x5 and the rears are 9x8 I think or something like that.
    ~Dallas~

    03' Roll Design/IMS-Roll/Custom Axis/C&D Racing 416ex

    Special thanks to...
    Colby@C&D Racing
    Hardkor Engineering
    G4 Graphics
    Team2powersports
    RockyMountain ATV
    Chino886
    K&K ATV
    JL ATV
    Magic Racing
    Blais Racing
    Metro Powersports
    IMS/Roll Design
    Motosportoutlet
    Badger Cycle
    And To my wife

    Motor mods- JE 11:1 comp,Stg 2 Hotcam,C&D Race ported head,Stock carb jetted,White Bros pipe. Ran on Turbo Blue 110

  4. #4
    Join Date
    Jan 2009
    Location
    North New Jersey
    Posts
    96
    is it ok to run a 22x7x10 front and a 20x11x10 rear??? why do they make the rear a 9 inch and the front a 10??

    my quad has 22x11x9 rears and i am thinking of getting a 20 inch but would like to match the rim size.

  5. #5
    Join Date
    Apr 2005
    Location
    WI
    Posts
    8,778
    well you cant run a 22x11x10 on a 9 inch rim. the first number (22)is the height of the tire or Diameter, the second (11)is the width of the tire, and the third (10) is the rim size, so you will need a 10" rim to fit that machine. I think the reason they make the rear rim smaller is to help with weight distribution of the machine the 10" diameter x 5" wide rim in the front comes out to be about the same weight as a rear rim that is 9" diameter by 8" wide. then you add a bigger tire to the back and it makes it a bit heavier if you start to get into bigger rims. you can match the rims if you like the look of them, i do all of my rims are 10" rims i just have some after market ones that are the size i wanted. rims range from 8" to 14" now so there is a wide variety, not all fit every machine though. the bolt pattern for the backs are 4/110 and the fronts a 4/144. 4 lugs 110 mm across the diagonal. good luck with your choice. steve
    Screw it... after a half hour of trying it just isnt worth jacking with a sig.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •