I must buy the socket and I need to know the size of the nut that holds the rear hub on the axle.
Any help would be appreciated.
I must buy the socket and I need to know the size of the nut that holds the rear hub on the axle.
Any help would be appreciated.
1. Honda 2001 400EX - Yellow
Pro Circuit headers and T4 silencer, Dynojet kit (170 main), stock air filter, top cut out of airbox lid with panty hose streched over top,
Renthal bars (atv race bend - silver/carbon), Renthal soft 1/2 waffle grips.
2. Honda 02 Odyssey EX-L, somekinda grayish green - wife
3. Honda 2k Civic EX, red - me
prevoiusly owned bikes:
2001 300EX (remains in the family)
2001 CR125
2001 CR250
1988 KX250 (in 1992)
Its really expensive like 60 something dollars I think. I just used a pipe wrench with a rag on the nut. It worked great.
#71
2000 Roll/Laeger's/Houser/Axis 416ex
2001 Arens/Laeger's/PEP 250r
Thanks to my sponsors for 2003 : 00-Buck ATV Racing, Team Pompton, Nebulae Race Team, Milton Inn Packaged Goods, Napa Auto Parts of Oak Ridge, Sick Style Racing, WD-40, Hinson Racing, IMS, Sport Center Racing, and Nac's racing
I'd also like to give a special thanks to Baldwin Motorsports for all there help and support they gave me.
We are now accepting resumes, this is a New Jersey based team. westsyder50@hotmail.com
http://www.geocities.com/sickstyleatv/index.html
Team Rcokford Fosgate 401+ northeast champ 147.7db
the hub for the rear wheels, or the hub for the brake disc..?
the rear wheel hubs are 27mm's (I think, not 100% on that)..
the locknut for the rear axle I have no Idea.. I have a 20" adjustable wrench (quality wrench, not a cheapo imported job) that does the trick just fine. I believe that motion pro makes a special wrench that goes on a 1/2" breaker bar for the axle lock-nuts..
Leo
You know the world is going crazy when France is accusing the US of arrogance, and Germany doesn't want to go to war.
Ya, rear hub nut is 27mm. Axle nut takes a BIG crescent wrench. I picked up one at a fleamarket for $15.00
Jeff Stoess
Team GATEWAY KORHS
Kawasaki KX450F
I was looking for the castle nut (the one with the kotter pin) that holds on the wheel hub. Thanks to you guys, I can now go and buy a 27mm socket.
thanks dudes.
1. Honda 2001 400EX - Yellow
Pro Circuit headers and T4 silencer, Dynojet kit (170 main), stock air filter, top cut out of airbox lid with panty hose streched over top,
Renthal bars (atv race bend - silver/carbon), Renthal soft 1/2 waffle grips.
2. Honda 02 Odyssey EX-L, somekinda grayish green - wife
3. Honda 2k Civic EX, red - me
prevoiusly owned bikes:
2001 300EX (remains in the family)
2001 CR125
2001 CR250
1988 KX250 (in 1992)