|
|
raptor killer
Let The Whoopin Begin
i just got back from glamis i was runnin a 13/38 sprokets with 21/12/8 haulers i was smoking some big bore raptors all extended and everything they were like what the hell is that of course its a 400ex hahaha it was the best i didnt lose to any four stroke at the hill. overall it was fun i shook the raptors guys hand :devil
60rwhp monsta!!!!!
note: not just a plain sparks 465
mods : je 92mm piston 13:1 comp modded by sparks ,sparks custom sleeve *not stroked* ,hot rod , fcr 39 carb with alcohol,titanium retainers, valves, sparks cam, ported and polished with a flow meter, lrd big bore exhaust ,sparks heavy duty cam chain, trued and welded crank (shaved down incase i decide to stroke to well over 500cc ), lightned flywheel, hardened rockers , hinson clutch crap,kevlar disks,motors been polished. i have other engine stuff as well and the frame is floresent yellow with majer racin plastic custom painted midnight blue, battery was moved to front , street tires *grooved* ,18in turf tamers, dg alloy nerfs,cascade block off, no front brakes,one custom head light , i owned 2 other kits a 416, and a 440 the 440 snapped a rod in half, and came out the case causin me to buy new cases.....not bad for bein 17
-banshee
-1989 250r with a cr500
Senior Member
good job dude ... thats cool that he wasn't all mad and stuff about it either.....keep up the good work
i guess you could say mission accomplished
06 YFZ 450..all white... LRD pipe, jet kit, lid removed, cam mod
LT JB front end and Ohlins shocks coming before june.
Senior Member
swwwwwwweeeeeeeeeeeeeeetttttttttt... i would love to see peoples faces standing around. everyone was probably lookin ur bike over.
2009 Cbr600RR Phoenix
WE ARE PENN STATE!!!!!!
raptor killer
the raptor guys were like not smiling or anything it was funny... i think i can find a few more things to speed it up a little to
60rwhp monsta!!!!!
note: not just a plain sparks 465
mods : je 92mm piston 13:1 comp modded by sparks ,sparks custom sleeve *not stroked* ,hot rod , fcr 39 carb with alcohol,titanium retainers, valves, sparks cam, ported and polished with a flow meter, lrd big bore exhaust ,sparks heavy duty cam chain, trued and welded crank (shaved down incase i decide to stroke to well over 500cc ), lightned flywheel, hardened rockers , hinson clutch crap,kevlar disks,motors been polished. i have other engine stuff as well and the frame is floresent yellow with majer racin plastic custom painted midnight blue, battery was moved to front , street tires *grooved* ,18in turf tamers, dg alloy nerfs,cascade block off, no front brakes,one custom head light , i owned 2 other kits a 416, and a 440 the 440 snapped a rod in half, and came out the case causin me to buy new cases.....not bad for bein 17
-banshee
-1989 250r with a cr500
Senior Member
what stroke, bore, cam other engine work do you have? I thought I wanted an R, but if this and a worrior (for my wife) is cheaper, I might go for it.
Mods: K&N, Jets (42 pilot 172 main and needle raised), No air box lid, TC Racing GNCC Cam, JE 425 11:1 piston, Big Gun full exhaust, PRM skids, Renthal Bars, DG alloy nerfs, Custom Grab Bar, 22x11" RAZOR 6 ply's, 20" Sand Skate 2s, 18x11" Tamers, Hoosiers and A whole can of Whoopass.
http://65.121.190.196/scott/index.html
FOR SALE! g/f's pregnant...... Wifes Pissed!
raptor killer
92mm bore stock stroke
60rwhp monsta!!!!!
note: not just a plain sparks 465
mods : je 92mm piston 13:1 comp modded by sparks ,sparks custom sleeve *not stroked* ,hot rod , fcr 39 carb with alcohol,titanium retainers, valves, sparks cam, ported and polished with a flow meter, lrd big bore exhaust ,sparks heavy duty cam chain, trued and welded crank (shaved down incase i decide to stroke to well over 500cc ), lightned flywheel, hardened rockers , hinson clutch crap,kevlar disks,motors been polished. i have other engine stuff as well and the frame is floresent yellow with majer racin plastic custom painted midnight blue, battery was moved to front , street tires *grooved* ,18in turf tamers, dg alloy nerfs,cascade block off, no front brakes,one custom head light , i owned 2 other kits a 416, and a 440 the 440 snapped a rod in half, and came out the case causin me to buy new cases.....not bad for bein 17
-banshee
-1989 250r with a cr500
Senior Member
thanks, where did you get the bore? Ive never seen a 465 bore before (not that I'm an expert on the subject).
Mods: K&N, Jets (42 pilot 172 main and needle raised), No air box lid, TC Racing GNCC Cam, JE 425 11:1 piston, Big Gun full exhaust, PRM skids, Renthal Bars, DG alloy nerfs, Custom Grab Bar, 22x11" RAZOR 6 ply's, 20" Sand Skate 2s, 18x11" Tamers, Hoosiers and A whole can of Whoopass.
http://65.121.190.196/scott/index.html
FOR SALE! g/f's pregnant...... Wifes Pissed!
raptor killer
sparks sleeve
i have a je 92mm piston 13:1 comp modded by sparks ,sparks custom sleeve *not stroked* ,hot rod , fcr 39 carb with alcohol,titanium retainers, valves, sparks cam, ported and polished with a flow meter, lrd big bore exhaust ,sparks heavy duty cam chain, trued and welded crank (shaved down incase i decide to stroke to well over 500cc ), lightned flywheel, hardened rockers , hinson clutch crap,kevlar disks,motors been polished. i have other engine stuff as well and the frame is floresent yellow with majer racin plastic custom painted midnight blue, battery was moved to front , i owned 2 other kits a 416, and a 440 the 440 snapped a rod in half, and came out the case causin me to buy new cases
60rwhp monsta!!!!!
note: not just a plain sparks 465
mods : je 92mm piston 13:1 comp modded by sparks ,sparks custom sleeve *not stroked* ,hot rod , fcr 39 carb with alcohol,titanium retainers, valves, sparks cam, ported and polished with a flow meter, lrd big bore exhaust ,sparks heavy duty cam chain, trued and welded crank (shaved down incase i decide to stroke to well over 500cc ), lightned flywheel, hardened rockers , hinson clutch crap,kevlar disks,motors been polished. i have other engine stuff as well and the frame is floresent yellow with majer racin plastic custom painted midnight blue, battery was moved to front , street tires *grooved* ,18in turf tamers, dg alloy nerfs,cascade block off, no front brakes,one custom head light , i owned 2 other kits a 416, and a 440 the 440 snapped a rod in half, and came out the case causin me to buy new cases.....not bad for bein 17
-banshee
-1989 250r with a cr500
Senior Member
sounds killer! Hey look, you have a signature now! I think I'll go after a 2 stroke though, seams easier to finance.
Mods: K&N, Jets (42 pilot 172 main and needle raised), No air box lid, TC Racing GNCC Cam, JE 425 11:1 piston, Big Gun full exhaust, PRM skids, Renthal Bars, DG alloy nerfs, Custom Grab Bar, 22x11" RAZOR 6 ply's, 20" Sand Skate 2s, 18x11" Tamers, Hoosiers and A whole can of Whoopass.
http://65.121.190.196/scott/index.html
FOR SALE! g/f's pregnant...... Wifes Pissed!
Yes, I Am a Piece of Meat
gotta pic?
-Jeff
"yeah! i know what you mean...i was what 5 and a half maybe it was Japan right before 3 times and I was still excited but thats ok it didnt hurt so we just spent the night later i'll finish the lawn dude" -JabberJaw
Posting Permissions
Reply With Quote