JabberJaw
03-04-2002, 06:51 PM
BLEED YOUR BRAKES PERFECTLY EVERYTIME
I was working on my bike today and had completely removed the rear brake caliper to clean it, and inspect it. I had read on here how to bleed the brakes using a friend and making a mess, and about a pump that cost $30 dollars...I thought for a minute and came up with this $1.25 idea.
I used 3 ft of that clear hose you use on those little fish tank pumps. I heated the end of the hose a little with a lighter, slipped it over the nipple on the bleader valve and let it cool for a second.
I ran the hose up over the rear grab bar and over to my open brake fluid resivour. I loosened the bleader valve and held the end of the hose over the resivour while I slowly pumped the brake pedal to push the fluid up the hose and right back into the resivour. You just hold the pedal down until the bubbles of air rise up the hose when you let go solid fluid will suck back in the caliper.
Keep doing this until no air comes up the hose. You can see even the smallest bubble of air with eaze. Tighten the bleader valve back down, pull the hose off and pour the remainder left in the hose back in the brake fluid bottle.
Now you have done a professional job for $1.25
I was working on my bike today and had completely removed the rear brake caliper to clean it, and inspect it. I had read on here how to bleed the brakes using a friend and making a mess, and about a pump that cost $30 dollars...I thought for a minute and came up with this $1.25 idea.
I used 3 ft of that clear hose you use on those little fish tank pumps. I heated the end of the hose a little with a lighter, slipped it over the nipple on the bleader valve and let it cool for a second.
I ran the hose up over the rear grab bar and over to my open brake fluid resivour. I loosened the bleader valve and held the end of the hose over the resivour while I slowly pumped the brake pedal to push the fluid up the hose and right back into the resivour. You just hold the pedal down until the bubbles of air rise up the hose when you let go solid fluid will suck back in the caliper.
Keep doing this until no air comes up the hose. You can see even the smallest bubble of air with eaze. Tighten the bleader valve back down, pull the hose off and pour the remainder left in the hose back in the brake fluid bottle.
Now you have done a professional job for $1.25