View Full Version : Rzr 170

12-29-2009, 12:55 PM
Here is the place to talk about every thing RZR 170. Our staff will be checking this forums and helping with tech advice everyday. We will also be featuring all the new performance products that we have developed. C&D Racing has also used quite a few of the other products available for the RZR 170 and can tell you what works and what doesn't. Look for product reviews and nad dyno testing charts to comes soon as well as helpful maintenance tips.

01-18-2010, 01:17 PM
what kind of HP and tq are you getting with them? im would thought they would make a 450 or 350... not the big dog but not little also, happy medium...

01-19-2010, 08:55 AM
Right now in stock form 4.5 HP at the rear wheels on our dyno. With our head porting and cam along with clutching we see 7.5 to 8 hp at the rear wheels. We have been testing after market intakes but so far some of them have shown a loss of 1 to 1.5 hp :( . I to would like to see a single seat rzr with the XP 550 motor.:D

01-19-2010, 02:36 PM
WHOA! i would have thought the would have more Hp then that?!

06-21-2010, 08:08 PM
We have had one for about 2 months now. Just took it to the trails of Tenn. a couple weeks ago. They do need some pretty major upgrades before they hit the trail. Upgrade we done with no mods to the engine, exhaust, or air filter as the little machine will run 30 - 32 MPH factory.

Factory UTV Skid Plate
Factory UTV Harness Bar
Crow 4-point harness set
Racer Tech rear bumper
Vent Racing front bumper (Not installed yet, but wish we had!)

The ground clearance was needs to be increased if you are going to put it on the trails! We are going to adjust that with bigger tires and wheels. If we lose significant power, we will change the sprocket to gain it back. We are also looking at the Vent Racing Filter relocation kit w/ jet kit and the Muzzy exhaust. Our machine runs 30 - 32 MPH stock with the accessories and an 11 yr. old and 4 yr. old in the cockpit!

Frame is not as strong as I would like! 11 yr. old rear ended me in Tenn. on my Rhino and slightly tweaked the hood mount, off setting the hood by about a 1/4". Could have prevented it if the Front Bumper had made it before we left. Nothing major that I can't pull back into place.