ezdaar
06-30-2009, 11:20 PM
Need the float hight for a 01 mojave 250.
Thanks.
taker80
03-30-2010, 09:29 AM
Well with the bowl off and the carb upside down and level there is a seam in the float where it was molded together almost dead center of the float. With it level that seam should be level with bottom of carb housing or just a tiny bit above level if the seam is hanging below then it needs adjusted!!
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.