View Full Version : smaller rims for the back
gene holroyd
01-09-2008, 09:41 PM
does any body know if any 9 inch rims fit on the rear of a mojave? i'd like to get rid of those tall 10 inchers that came stock.
the Z Man
01-09-2008, 09:48 PM
I believe Honda fits, they are 9's
greenblood01
01-15-2008, 07:09 PM
You can get 8's or 9's but only with honda hubs. 10's are the only things they make for the 156 pattern.
gene holroyd
01-16-2008, 12:03 PM
so is 156 the distance in milimeters in between the wheel studs? Thank for the info.
ridered92
01-16-2008, 12:13 PM
any one need any mojave parts?
greenblood01
01-16-2008, 05:25 PM
Yes, 156 is the distance in milimeters between the wheel studs. Honda's patter in 4/110. The splines are the same, but on most honda hubs, you have to put some sort of spacer between the axle and hub.
jonboy
01-16-2008, 10:14 PM
I just measured the non splined section and marked the inside of the hub with a sharpie at that measurement then took a dremel to the splines on the hub. Works great, and the hubs are tight.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.