View Full Version : compresion ?
450rJam
06-03-2007, 06:11 PM
any of you guys know what the stock compresion should be on one of these babies ?
there has got to be something wrong with this thing.
I am 220 and have to hit a bump with my arse hanging off the back to get it to wheelie.
400ex_rider13
06-05-2007, 09:34 PM
Originally posted by 450rJam
any of you guys know what the stock compresion should be on one of these babies ?
there has got to be something wrong with this thing.
I am 220 and have to hit a bump with my arse hanging off the back to get it to wheelie.
compression of the spring rates or compression ratio of the piston? my dad works at a suzuki/honda dealer, he will know.
450rJam
06-06-2007, 04:47 AM
piston compression,
my z250 just seems low on power, Im checking compression to see if I need rings. (it starts up really fast and easy so Im grasping at straws)
I cant figure out why this thing is such a terd
400ex_rider13
06-06-2007, 10:05 AM
Originally posted by 450rJam
piston compression,
my z250 just seems low on power, Im checking compression to see if I need rings. (it starts up really fast and easy so Im grasping at straws)
I cant figure out why this thing is such a terd
the stock compression is 9.2:1
but my brother has a wiseco high compression 10.5:1
here are his mods, im 16 and weigh about 165, and can ride a wheelie just as good as my 400ex.
CHM P-4R slip-on exhaust
DynoJet kit
Factory Suzuki swingarm skidplate
Polished & Ported head
PowerMadd handguards
ProCom rev box
Uni Air filter
Versha Valves
WebCam stage 2 cam
WebCam valve springs
Wiseco 10.25:1 piston
only one problem, theres too much power for the suspension and chassic, there are elka's to get for it though
400ex_rider13
06-06-2007, 10:07 AM
Originally posted by 400ex_rider13
the stock compression is 9.2:1
but my brother has a wiseco high compression 10.5:1
here are his mods, im 16 and weigh about 165, and can ride a wheelie just as good as my 400ex.
CHM P-4R slip-on exhaust
DynoJet kit
Factory Suzuki swingarm skidplate
Polished & Ported head
PowerMadd handguards
ProCom rev box
Uni Air filter
Versha Valves
WebCam stage 2 cam
WebCam valve springs
Wiseco 10.25:1 piston
only one problem, theres too much power for the suspension and chassic, there are elka's to get for it though
these mods really make the quad come to life, it was a great increase
450rJam
06-06-2007, 04:15 PM
do you know the psi it should have stock ?
my 250r was around 185 psi but it was a 2 stroke, Im not sure how close to that it should be.
400ex_rider13
06-06-2007, 09:05 PM
Originally posted by 450rJam
do you know the psi it should have stock ?
my 250r was around 185 psi but it was a 2 stroke, Im not sure how close to that it should be.
high as 200, but normal reading would be 130 to 175
450rJam
06-07-2007, 04:42 AM
sweet, thank you very much
thats exactly what I needed to know
I do appreciate it
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.