View Full Version : intake

03-01-2007, 11:00 AM
i have a kasea 90. the motor has mild mods on it. it has a pe 20mm carb. if i got a koso or a lucky 7 intake with cage and reeds would i see a differance?

03-01-2007, 02:29 PM
If you have an expansion chambered pipe... yes, you should see a difference.

Rule of thumb is: You have to be able to get the flow out of the motor, before you can put more flow into it. Now you might be able to see a little difference with a stock pipe, but only if the intake/reed assy is really restrictive.

03-01-2007, 04:56 PM
ya its got a pipe on it....

03-01-2007, 06:32 PM
Run the KOSO intake with intake stuffers to get the most power.

03-01-2007, 07:24 PM
With only a 20mm on a 90 I wouldn't mess with trying to restrict the flow with the stuffers. You said you have some mods and a pipe and most folks are running a 24mm at that point so you need all you can get out of the 20mm.