ok, so chances are things are out of wack. this is where i usually seek the help of slave labor just kidding. bought seriousely, grab a buddy, this will make things easier.
you will need to loosen the cam tensioner. located on the right side of the quad near where the header raps around. pop the 10mm bolt off (it is really shallow) and set it with your parts. you will need to take a screw driver (i believe a 1/8) and stick it in the slot until it "catches". now, have your buddy turn the screwdrive to the RIGHT until it can be turned no more. either use a vice grip to hold the tension or just have your friend sit there and hold it. this takes the tension off of the cam chain so you can remove it. picture taken by preddy08 from www.predatorowners.com
just kidding. bought seriousely, grab a buddy, this will make things easier.
Reply With Quote