I was told that the front pattern for my 2003 Viper 90 is the same as a 1987 250x,now what I need to know is what offset do I need?I would like to make it wider.
I was told that the front pattern for my 2003 Viper 90 is the same as a 1987 250x,now what I need to know is what offset do I need?I would like to make it wider.
You would want to use a 2X4 offset wheel. If you are using the stock 8 inch front tires you would order an 8x6 wheel with a 2x4 offset. The 2 represents the width of the inside half of the wheel and the 4 is the width of the outside half. Hope this helps!
this iswhat We have done also.... you cant beleive the difference a 2/4 offset makes for stabiity.. Robb correct me if Im wrong, but isnt the Eton Viper a honda bolt Pattern all the way around????Seems like thats what I ordered for my Boy.....Originally posted by ROBBSRACING
You would want to use a 2X4 offset wheel. If you are using the stock 8 inch front tires you would order an 8x6 wheel with a 2x4 offset. The 2 represents the width of the inside half of the wheel and the 4 is the width of the outside half. Hope this helps!
Tina
http://qjsimaging.com/
-2002 Duncan 440ex-
Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper
2007 Suzuki LTR450
FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers
2008 Raptor 250 BUILD IN PROGRESS!
Thank you 2010 Sponsors
and Contributers!!
Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
ASV,Motoworks,QuadTech,Streamline,
RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging
This is something I picked up from www.miniatv.com
This is a work in progress please add your knowledge as needed.
Kasea Skyhawk 90
4 x 110 front but has square hub not round.(modify)
4 x 100 rear
Eton Viper 90
4 x 110 front
4 x 110 rear
Predator/Sportsman/Scrambler 90/50
4 x 110 front
4 x 110 rear
OLD SCHOOL Suzuki LT50 (w/Out suspension)
3x90 front
3x90 rear
Suzuki Lta 50/ Kawasaki Kfx 50 02-04
3x100 front
3x100 rear
LT80 87-03/kfx80 03
3X120 front
3X120 rear
Raptor/Badger 80
4 x 88 front
3 x 90 rear
Honda TRX 70 86-87
4x110 front
3/100 rear
TRX90 93-02
4 x 85
4 x 85
Xtreme Tantrum 50,90,100, Pro100
4 x 110 front
4 x 110 rear
LEM
3 X 100- with AC hubs only. (front and rear)
4 x 85- with Robb Racing hubs (front and rear)
Dinli, DRR, Jehm
4 x 110 front
4 x 110 rear
Arctic Cat
4 x 115 front
4 x 115 rear
Thanks for posting all those!!! I thought thats what the bolt pattern was its nice casue I can swit ch tires with my kids if needed....Originally posted by quad_rider
This is something I picked up from www.miniatv.com
This is a work in progress please add your knowledge as needed.
Kasea Skyhawk 90
4 x 110 front but has square hub not round.(modify)
4 x 100 rear
Eton Viper 90
4 x 110 front
4 x 110 rear
Predator/Sportsman/Scrambler 90/50
4 x 110 front
4 x 110 rear
OLD SCHOOL Suzuki LT50 (w/Out suspension)
3x90 front
3x90 rear
Suzuki Lta 50/ Kawasaki Kfx 50 02-04
3x100 front
3x100 rear
LT80 87-03/kfx80 03
3X120 front
3X120 rear
Raptor/Badger 80
4 x 88 front
3 x 90 rear
Honda TRX 70 86-87
4x110 front
3/100 rear
TRX90 93-02
4 x 85
4 x 85
Xtreme Tantrum 50,90,100, Pro100
4 x 110 front
4 x 110 rear
LEM
3 X 100- with AC hubs only. (front and rear)
4 x 85- with Robb Racing hubs (front and rear)
Dinli, DRR, Jehm
4 x 110 front
4 x 110 rear
Arctic Cat
4 x 115 front
4 x 115 rear
http://qjsimaging.com/
-2002 Duncan 440ex-
Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper
2007 Suzuki LTR450
FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers
2008 Raptor 250 BUILD IN PROGRESS!
Thank you 2010 Sponsors
and Contributers!!
Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
ASV,Motoworks,QuadTech,Streamline,
RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging
the 87 honda 250x rim is a 10 inch rim. that is the one we use to run the 19x6x10 holeshot mx tires on the front of a mini.
" A good friend will bail you out of jail but a true friend will be sitting beside you saying.... Dang that was fun"
Mark
Bubba ( son )
2005 YFZ450, 08 motor,Bike cam, Laeger Plus 2 a-arms, Elka shocks, GYTR Exhaust, Holeshots on Baja rims, AC Pro Pegs, G- Force axle
2009 Sponsor: Asv, SixSixOne. Oneal Racing, Houser Racing, GT Thunder, Nacs Racing, Elka
We run a 10 inch rim as well
http://qjsimaging.com/
-2002 Duncan 440ex-
Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper
2007 Suzuki LTR450
FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers
2008 Raptor 250 BUILD IN PROGRESS!
Thank you 2010 Sponsors
and Contributers!!
Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
ASV,Motoworks,QuadTech,Streamline,
RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging
quick question....
running a 2/4 offset front with a 3/5 offset rear, will the width be close or will the front be too narrow?
Staff Photographer ATVRiders.com
Senior Photographer ATVInsider
Staff Photographer GNCC Racing/ATV MX
Staff Photographer Vurboffroad
Staff Photographer Cycle News
the front would be too narrow. on a mini quad you want the front 1 inch wider than the rear for it to steer right.
Mark
" A good friend will bail you out of jail but a true friend will be sitting beside you saying.... Dang that was fun"
Mark
Bubba ( son )
2005 YFZ450, 08 motor,Bike cam, Laeger Plus 2 a-arms, Elka shocks, GYTR Exhaust, Holeshots on Baja rims, AC Pro Pegs, G- Force axle
2009 Sponsor: Asv, SixSixOne. Oneal Racing, Houser Racing, GT Thunder, Nacs Racing, Elka
Originally posted by markvette
the front would be too narrow. on a mini quad you want the front 1 inch wider than the rear for it to steer right.
Mark
http://qjsimaging.com/
-2002 Duncan 440ex-
Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper
2007 Suzuki LTR450
FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers
2008 Raptor 250 BUILD IN PROGRESS!
Thank you 2010 Sponsors
and Contributers!!
Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
ASV,Motoworks,QuadTech,Streamline,
RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging