Results 1 to 9 of 9

Thread: 2005 400ex w/416,etc...

  1. #1
    Join Date
    Jul 2014
    Posts
    5

    2005 400ex w/416,etc...

    ive got a yellow 2005 400ex. purchased new in 05. 416 kit installed in 06. fried the piston and rings in 07. took the motor apart and never got around to put it back together and its been sitting ever since. lots of new parts installed when the 416 was done. je piston and rings,stage 2 hotcam,powerbomb header,hmf pipe,hd timing chain,dirt racer clutch,tinner air scoops,airbox blockoff(removed lid with kn filter and outerwear),450r front shocks,pro armor bullhorn bumper,pro taper bars,powermadd handgaurds,holeshot hd rear tires,hd rear skid plaete,rad carrier.im sure their are some other things that ive missed but i havent touched the thing in over 7 years. its greasy and dirty. but everything is there. i dont know what it would be worth to someone, all i know is about how much i have spent on it.i use to be on these forums all the time under the name journeyman21613, but its been so long my name was removed. i just lost interest.... if someone wants to make a reasonable offer ill sell it... if not ill let it sit there until i get enough ambition to put it back together... really wanna sell the whole thing together, cuz im way too busy to part it out....dont have any pics right now(again im busy) but maybe within the next few days i can get it out and grab some.

  2. #2
    Join Date
    Jul 2014
    Posts
    5
    nobody wants this??

  3. #3
    Join Date
    Oct 2005
    Location
    kentucky
    Posts
    1,141
    where are you located?
    05 450r
    Houser stem, Denton Stabalizer, Moose Fatbars, Baldwin Hot Start Cable, Hot Rod Crank, Moose Billit Clutch Basket, Moose Easy Pull Clutch Lever, pro motion twist throttle, Lonestar Carrier, Blingstar Heel Guards, Pced Fame(Black), Pced subframe(Black), Pced swinger(Black), PRM chassis Skid, Maier Hood, front hipers

    04 tld pred
    Full hmf sport pipe, pro taper bars, um nerfs, itp rims, pced frame and subframe and a-arms ( orange), pced swing arm shock springs and steering stem (black), cycra handguards, motion pro twist throttle, ims bumper, dg grab bar, moose chassis and swinger skids, spyder grips, k&n filter, pro design kill switch, front itp t9 beadlocks, rear douglas ultimate beadlocks

  4. #4
    Join Date
    Jul 2014
    Posts
    5
    cambridge, md

  5. #5
    Join Date
    Oct 2005
    Location
    kentucky
    Posts
    1,141
    a little far for me. glws
    05 450r
    Houser stem, Denton Stabalizer, Moose Fatbars, Baldwin Hot Start Cable, Hot Rod Crank, Moose Billit Clutch Basket, Moose Easy Pull Clutch Lever, pro motion twist throttle, Lonestar Carrier, Blingstar Heel Guards, Pced Fame(Black), Pced subframe(Black), Pced swinger(Black), PRM chassis Skid, Maier Hood, front hipers

    04 tld pred
    Full hmf sport pipe, pro taper bars, um nerfs, itp rims, pced frame and subframe and a-arms ( orange), pced swing arm shock springs and steering stem (black), cycra handguards, motion pro twist throttle, ims bumper, dg grab bar, moose chassis and swinger skids, spyder grips, k&n filter, pro design kill switch, front itp t9 beadlocks, rear douglas ultimate beadlocks

  6. #6
    Join Date
    Jul 2014
    Posts
    5
    bump

  7. #7
    Join Date
    Jun 2013
    Posts
    9
    text pics to 765/894/2863

  8. #8
    Join Date
    Jan 2010
    Location
    westminster maryland
    Posts
    27
    What are u looking to get for it??

  9. #9
    Join Date
    Jul 2014
    Posts
    5
    Would love to get $1500 for it.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •