Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: will yamaha raptor rear wheel hubs fits 400ex?

  1. #1
    Join Date
    Jan 2014
    Posts
    8

    Exclamation will yamaha raptor rear wheel hubs fits 400ex?

    please to let me know if it works or not
    i know that they have the same numbe of spline(24) but the pitch are different so its why im asking this

  2. #2
    Join Date
    Aug 2008
    Location
    Central NJ
    Posts
    11,326
    Yes but only if they are used hubs, the splines are slightly too thick otherwise. Even so dont do it.
    If it's stupid, and it works, it isn't stupid. - Murphy's Law
    2000 426EX,sold
    2004 450R WIP
    -Longtime A.A.D.S. (Accessory Acquisition Disorder Syndrome) sufferer.
    400EX Frequently Asked Questions, CHECK HERE FIRST!

  3. #3
    Join Date
    Jan 2014
    Posts
    8
    ok cause a have a 400ex and was willing to buy tire and rims that came with the raptor because of the bolt pattern. the guy give me a good price so i dont know if i should try because the hubs are used so..

  4. #4
    Join Date
    Aug 2008
    Location
    Central NJ
    Posts
    11,326
    Its your call....
    If it's stupid, and it works, it isn't stupid. - Murphy's Law
    2000 426EX,sold
    2004 450R WIP
    -Longtime A.A.D.S. (Accessory Acquisition Disorder Syndrome) sufferer.
    400EX Frequently Asked Questions, CHECK HERE FIRST!

  5. #5
    Join Date
    Jan 2014
    Posts
    8
    so you say that they will probably wont fit?

  6. #6
    Join Date
    Aug 2008
    Location
    Central NJ
    Posts
    11,326
    Quote Originally Posted by njohnson911 View Post
    so you say that they will probably wont fit?
    No idea really till you try it. But there is a good chance its possible they wont.
    If it's stupid, and it works, it isn't stupid. - Murphy's Law
    2000 426EX,sold
    2004 450R WIP
    -Longtime A.A.D.S. (Accessory Acquisition Disorder Syndrome) sufferer.
    400EX Frequently Asked Questions, CHECK HERE FIRST!

  7. #7
    Join Date
    Sep 2007
    Location
    ky
    Posts
    1,013
    try it and let us know if it works. you can always sell the hubs and wheels if it dont work.

  8. #8
    Join Date
    Aug 2002
    Location
    Maryland
    Posts
    4,334
    The yamaha hubs are like the 250r. If you put them on a 400ex you will loose 2 or 3 inches of width.

  9. #9
    Join Date
    Jan 2014
    Posts
    8
    Quote Originally Posted by Honda5 View Post
    The yamaha hubs are like the 250r. If you put them on a 400ex you will loose 2 or 3 inches of width.
    I know, i will add some spacer.. but you thinck they will fit?

  10. #10
    Join Date
    Jan 2012
    Location
    Iowa
    Posts
    657
    I have a question regarding a 400 and a raptor. A buddy needs new rear tires on the yami, I couldn't find any for him so I was going to sell him my wheel/tire combo rears. I thought they were all 4/110, Found out quick raptor is 4/115.

    The problem is, My tires and wheels are new and we used a chit ton of bead seal on them so im kinda worried about un-mounting them for the yami wheels. I read you can drill out the 400 wheels with a 1/2" bit and maybe some filing and they will fit. Is this true? has anyone done it?

    I don't want to ruin a set of wheels if it wont work, But I have read many opinions on it and they say it works. Anyone by chance do this and or try and fail?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •