anyone know where to get any good offset aluminum wheels? will be going on a 400ex
anyone know where to get any good offset aluminum wheels? will be going on a 400ex
Dennis kirk
02 Warrior
Lonestar, Elka, Houser, Yoshimura, American Star Racing, Flexx
04 Crf50
ohiomafiariders.com
how do u know how much the offset is? like some wheels say offset: 3+2 i dont know what that means
Spacing in inches from the outside to inside of the wheel so that would be 3" on the inside and 2" on the outside. An example would be say you had a 4-1, the quad would be narrower
02 Warrior
Lonestar, Elka, Houser, Yoshimura, American Star Racing, Flexx
04 Crf50
ohiomafiariders.com
is there anything wrong with flipping the wheels around so they make the quad wider? thats what i was going for.
Aside from the horrible ride they will produce and the fact the caliper is exposed, nothing wrong.Originally posted by 07RedRider400
is there anything wrong with flipping the wheels around so they make the quad wider? thats what i was going for.
Dont do it, buy offset wheels or get wider arms.
If it's stupid, and it works, it isn't stupid. - Murphy's Law
2000 426EX,sold
2004 450R WIP
-Longtime A.A.D.S. (Accessory Acquisition Disorder Syndrome) sufferer.
400EX Frequently Asked Questions, CHECK HERE FIRST!
i was looking at these
4/144 ITP .190 T-9 Pro Series Wheel 10X5 4.0 + 1.0 Polished
http://www.rockymountainatvmc.com/p/...o-Series-Wheel
i want the wheel to space out not in, this wheel would be a 4 in 1 out right? I was gonna flip it around so it would be 4 out, but how does that ruin the ride?
or maybe i would get the 3 in 2 out and flip it around i need to check what the stock offset is for the 400ex up front
3+2 is stock offset for all quads.4+1 would make you 1 inch narrower on each side.2+3 would make you 1 inch wider.dont flip your wheels,its just ghetto.plus your valve stem will hit your caliper requiring you to drill a new hole on the other side for a stem and fill the existing hole.plus the wheels flipped will put extra pressure on your spindles and such.a spacer kit would probly be ok but its still ghetto.better suspension is better than more width.