I just bought this 92 Quadracer for under $800. It has a FMF Gold Series Header, Powercore Silencer, 1” wheel spacers on the front, 2” wheel spacers on the back. It needed a flywheel cover, but not anymore I had a spare one.
I just bought this 92 Quadracer for under $800. It has a FMF Gold Series Header, Powercore Silencer, 1” wheel spacers on the front, 2” wheel spacers on the back. It needed a flywheel cover, but not anymore I had a spare one.
00 400EX- 440 kit, Stage 2 Cam, Rev Box, FMF Header, White Brothers R4 Slip on, Dura Blue +2 Axle...
94 300EX-Piped & jetted
Just Bought-92 LT250R-FMF Gold Series Pipe, Khien Carb, Wheel Spacers, DG Nerf Bars
87 LT250R- Project-put on hold
Can any tell me about this Keihn carb? I don't belive that it is stock
00 400EX- 440 kit, Stage 2 Cam, Rev Box, FMF Header, White Brothers R4 Slip on, Dura Blue +2 Axle...
94 300EX-Piped & jetted
Just Bought-92 LT250R-FMF Gold Series Pipe, Khien Carb, Wheel Spacers, DG Nerf Bars
87 LT250R- Project-put on hold
Here's one from the other side
00 400EX- 440 kit, Stage 2 Cam, Rev Box, FMF Header, White Brothers R4 Slip on, Dura Blue +2 Axle...
94 300EX-Piped & jetted
Just Bought-92 LT250R-FMF Gold Series Pipe, Khien Carb, Wheel Spacers, DG Nerf Bars
87 LT250R- Project-put on hold
THats a good aftermarket carb (Mikuni's were stock) for the LT's... PWK ... measure it w/ calipers to see what size you got... prob. a 36 or 38mm?
If you have to heat up in boiling water the airbox side boot to get it on the carb, it's a 38mm PWK!
Great find for under $800!