While riding a few weeks ago i sucked a bunch of dirt mud and water in my carb. after cleaning it and it still wont crank. i also need to know which jet goes in each spot on the stock jets.
Any suggestions??
While riding a few weeks ago i sucked a bunch of dirt mud and water in my carb. after cleaning it and it still wont crank. i also need to know which jet goes in each spot on the stock jets.
Any suggestions??
posta pic of your carb... i want to see if it has something on there. look at your jets one could be plugged... does it roll over?
Originally posted by BakerRacing40
bad thing is she's probably been rode harder than half the bikes in the start gate..
but you can still have fun with somethin that's a lil worn out...
RIP John Gallagher Sr
give him a blessing or two... god bless this rider and all fallin riders..
http://www.metalmulisha.com/team/jeremy-lusk
250r... the G.O.A.T of quads...
i took it to the shop today. Im getting fire, compression, and fuel. The timming is right but it sounds dry when you turn the motor over. The carb has a primer and an electric choke. Any Ideas??