Results 1 to 2 of 2

Thread: 03 500 rubicon wont shift

  1. #1
    Join Date
    Apr 2007
    Location
    louisiana
    Posts
    13

    03 500 rubicon wont shift

    when u crank up the bike its in neutral when u select farward or reverse d1 d2 esp blinks it will move but will not shift out when u pt it in reverse it will move but cuts out this all started when the starter messed up and had to start with pull cord replaced starter need help
    04 400ex ,416 11.1, stage 2 cam ,dynojet stage 2, kibble white valve and springs ,port and polish head, curtis sparks exaust ,air box eliminator kit,15/36ratio,dura blue +2 axle

  2. #2
    Join Date
    May 2009
    Location
    Las Vegas NV
    Posts
    1
    Both our 05 and 06 have done the same thing, and found the idle is too high. If you pull your choke out make sure thats all the way in and if that doesnt work under you right side of bike remove the plastic cover and there is a nob screw thing where you can adjust the idle (sorry about the lack of tech terms) Mine has a black nob around a screw with a spring under it that is upside down. good luck
    Las Vegas, NV
    2005 Honda Rubicon Gscape
    2006 Honda Rubicon 500

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •