hey fellas!
we got a 2000 or a 01 artic cat 500 4x4 auto, and it wont run it will run if you hold the starter but that doesnt do any good for use because we cant use it.... any idea of what it could be? any help will help thanks alot!
hey fellas!
we got a 2000 or a 01 artic cat 500 4x4 auto, and it wont run it will run if you hold the starter but that doesnt do any good for use because we cant use it.... any idea of what it could be? any help will help thanks alot!
Originally posted by BakerRacing40
bad thing is she's probably been rode harder than half the bikes in the start gate..
but you can still have fun with somethin that's a lil worn out...
RIP John Gallagher Sr
give him a blessing or two... god bless this rider and all fallin riders..
http://www.metalmulisha.com/team/jeremy-lusk
250r... the G.O.A.T of quads...
Check the stator/flywheel _ I believe that is a Suzuki motor and they had a fly wheel that the magnet was held in place with adhesive and was none to release.
Unfortunately you have to take the entire side cover off to do a visual
If you ohm the harness you should find the stator out of spec ( refer to manual)
Teufel
Appalachian Motorsports
Appalachianmotorsports.com
METZGERHUND MOTORSPORTS
Check the stator/flywheel _ I believe that is a Suzuki motor and they had a fly wheel that the magnet was held in place with adhesive and was none to release.
Unfortunately you have to take the entire side cover off to do a visual
If you ohm the harness you should find the stator out of spec ( refer to manual)
Teufel
Appalachian Motorsports
Appalachianmotorsports.com
METZGERHUND MOTORSPORTS
oh i got that fixed a while back... taped the CDI box like on the 250r's and it went right off... but now i need some front lime green plastic for a 06 or 07 650H2.... with the head light and the whole 9 yards...
Originally posted by BakerRacing40
bad thing is she's probably been rode harder than half the bikes in the start gate..
but you can still have fun with somethin that's a lil worn out...
RIP John Gallagher Sr
give him a blessing or two... god bless this rider and all fallin riders..
http://www.metalmulisha.com/team/jeremy-lusk
250r... the G.O.A.T of quads...