You can try starting fluid and that will tell you if you have a fuel problem. If it runs with eather. You may need to consider looking into the carburation a little more. Try the eather in through the carb first then through the plug hole. If it dont run you may want to try a few other things. Does it have good compression? Are the valves adjusted corectly? Is the spark good or justenough to show on the plug? Is the exhaust plugged. This should be a good start.
Just got a new dyno, callin it my new baby boy.
Honda 250R
Willy built motor, 100% custom
personally built 3mm stroker crank
long rod
ZRT piston
specially cut reeds
Major head work
Major cyl. work
Cases cyl all matched
2000 CR250 stator and ignition
Much more motor work
Basically stock chassis Shortened shocks