well thats cute, but this can all be done in PM's. anyway, back to the subject of FAQ for the 250ex.Originally posted by honda450rider33
thank you for your apologe i accept i hope you accept mine also
well thats cute, but this can all be done in PM's. anyway, back to the subject of FAQ for the 250ex.Originally posted by honda450rider33
thank you for your apologe i accept i hope you accept mine also
~Mike~
2000 Honda 416EX
my aftermarket shocks are set up for stock a arm lenth (they asked) so does this mean i cant get plus twos?
Brad Harrell #927
www.oxcracing.com
08 yz250f
they'll have to be revalved for the extra leverage. possibly resprung?? if you put +2s on they would bottom out very easily.Originally posted by m.h.s.c.#527
my aftermarket shocks are set up for stock a arm lenth (they asked) so does this mean i cant get plus twos?
~Mike~
2000 Honda 416EX
I wont lock it, because it's already stickied and there is alot of good info here.Originally posted by ALEXANDERJASON
HONDA450RIDER, FAIR ENOUGH, MY APLOGIES TO YOU.
RYAN, YOU SHOULD ASK TO HAVE THIS THREAD LOCKED.
If anything I'll ask the mods to delete all the unnecessary posts.
MHSC, when you change to wider a-arms, you change the amount of leverage that is placed on the shock, which in effect makes it ride softer. You'll have to get them revalved for them to function properly.
Respect is earned, never given.
2002 250ex- SOLD.
Creator of the 250EX Performance FAQ. For 250ex headwork and various porting , please email me at flyinryanporting@gmail.com
ok im not bottoming out on the softest setting so im thinkin about sum wheel spacers what do u think and im not sure if i do the fron should i do the rear and vice versa
Brad Harrell #927
www.oxcracing.com
08 yz250f
If I were you I wouldn't throw off the front end geometry when you have such nice shocks. If you want to widen the front end, do it the right way. You can run your shocks how they are on wider a-arms, but they would be 10x better if you revalved them. Spacers would be fine for the back though because it's not like you do much jumping in xc racing where you would bend the axle.
406ex - January '13 QOTM
i know but i am wanting a softer ride so i think wheel spacers would be good
Brad Harrell #927
www.oxcracing.com
08 yz250f
I don't know what adjustments you have on your elka's, but you should be able to make them softer. If you get wheel spacers on the front, you will feel every root, rock, or stump you hit on the trail. It will jerk the bars out of your hands a lot easier.
406ex - January '13 QOTM
really that bad i have preload and compression
Brad Harrell #927
www.oxcracing.com
08 yz250f
Updated today.
Respect is earned, never given.
2002 250ex- SOLD.
Creator of the 250EX Performance FAQ. For 250ex headwork and various porting , please email me at flyinryanporting@gmail.com