I want to do a 416 build but will the stock cam chain be good enough ofr should I replace that too?
I want to do a 416 build but will the stock cam chain be good enough ofr should I replace that too?
2000 400ex-parted out
2005 Predator-traded
2003 400ex-Parted out
2003 400ex- Parted out
3 Blasters- 1 kept, 1 parted out, 1 traded
06 Outlaw 500 (current quad)- HMF Bill Balance full exhaust, Stage 2 hotcams, ITP Holeshot rear tires, Dynojet jet kit, Titan front tires.
98% of the teenage population does, will try or has tried smoking pot. If you're one of the 2% who hasn't, copy & paste this into your signature.
'|^^^^^^^^^^^| ||
|...BEER TRUCK......| ||'|";, ___.
|_..._...________=|=||'_|__|.,] -
"(@)'(@)'"**|(@)(@)**** ''(@)
I'm pretty sure the stock chain should be fine.
94 4trax 300 4x4 01 MXZ 700 01 400ex 86 250R
not sure if it was just bad luck or not but my 416 broke mine, well almost had to rebuild because of a blown head gasket and found the chain had 2 of the 3 broken links going across the top broken. For the extra $30 a crf cam chain costs its good insurance to buy it I know. If I was to be building another 416 I would be installing hd studs and a crf cam chainn. Better to spend the extra 100 now than to have to tear down again later because something broke.
Evan
2005 yzf450
Blown head gasket on a bored 400EX? No way... Ha ha my 440 ate head gaskets faster than a fat kid can eat ice cream.had to rebuild because of a blown head gasket
Anyway, I had a CRF chain on mine. Easy to do and cheap insurance. Don't cut that corner. Good luck!!
2006 450R
Rossier Exhaust
GT Thunder shock set up
Other goodies
"Do not go where the path may lead, go instead where there is no path and leave a trail."--Emerson
ya, even if you you dont break the stock one, stretching can be just as bad, as well as a power eater, anyways, i'm running a 440 on stock studs with no dowels, with a crf cam chain, and its going good so far, maybe 20 hours on it
It's like $27 from Service Honda.....it's a no brainer. I run one in mine and it's cheap insurance against expensive repairs if you ask me Might as well replace it while everything is apart.
00' 400EX - GT Thunder 450 stroker, custom JE 12.5:1 piston,
+7mm stroked crank, HD stroker rod, HRC cam, GTT full race porting, +1mm intake valves, FCR 39 carb, CRF timing chain, Denso IXG27 iridium plug, full Hinson 8 plate clutch, Desert Toyz Supercooler w/ SPAL fan, UM airbox w/ UNI, CT Hi-Output exhaust, Roll LOBO II F/R, LT PEP 8 click ZPS piggyback fronts, PEP ZPS rear, YFZ brakes/450R master, CCP stabilizer, Hiper Tech beadlocks, Durablue X-33, TAG, Quadtech, ASV, AC, IMS, RAD, Works Connection, Galfer..
05' Kawasaki KLX 110 - Fast 50's springs F/R, HRC cradle, Rox risers, FLY fatbars, NGK CR6HIX iridium plug, Twin Air filter
Spend the $30 or so and replace it. For the money, you can't afford not to replace it.
2000-440ex Stroker--Fan Cooled
Houser +1 A-Arms, Elka Triple rates, Laegers +1 1/4 Swingarm, G-Force Axle w/Durablue Anti-Fade Locknut, 14/36 Gearing, DID X-Ring Chain, C&D Revalved Rear, Maier Silver Plastic, Steel Grey PCed Frame, SPAL Fan, AC Bumper, Pro Armour Footpeg Extensions, Renthal Bars, Yoshimura Full Exhaust, 450R Carb w/ZR's Adaptor, K&N w/o Lid, Powroll 440 Stroker w/stg 3 HC, P&P Head, HD rod, GT Thunder HD Studs, and Timing chain, AMR Monster Coil, 4 Degree Advance Key and a 12oz lighter flywheel. Now at 12.5:1 Compression!
450R Front brake upgrade using 06-up Spindles and 07' hubs.
450R Rear Brake Upgrade
Kenda Knarly XC Radial 21x11x9 Rear Tires
Shorai Lithium Iron Battery
Running E85--Jetting: 70 pilot, 240 main, HRC needle on bottom notch and shimmed.