I'm having troubles with my quad running. I have a hmf slip, k@n filter and I'm running the air box lid. I have a a 160 main jet and 42 pilot, and everything is stock. When I'm at complete idle and pop the gas it bogs before it revs. Any help??
I'm having troubles with my quad running. I have a hmf slip, k@n filter and I'm running the air box lid. I have a a 160 main jet and 42 pilot, and everything is stock. When I'm at complete idle and pop the gas it bogs before it revs. Any help??
Mitch
2003 Jb crf450
mine does the same thing did you take the carb apart and clean it ? if not try that and see if it helps then check your spark plug and make sure it isnt running lean or rich
05 450r
Houser stem, Denton Stabalizer, Moose Fatbars, Baldwin Hot Start Cable, Hot Rod Crank, Moose Billit Clutch Basket, Moose Easy Pull Clutch Lever, pro motion twist throttle, Lonestar Carrier, Blingstar Heel Guards, Pced Fame(Black), Pced subframe(Black), Pced swinger(Black), PRM chassis Skid, Maier Hood, front hipers
04 tld pred
Full hmf sport pipe, pro taper bars, um nerfs, itp rims, pced frame and subframe and a-arms ( orange), pced swing arm shock springs and steering stem (black), cycra handguards, motion pro twist throttle, ims bumper, dg grab bar, moose chassis and swinger skids, spyder grips, k&n filter, pro design kill switch, front itp t9 beadlocks, rear douglas ultimate beadlocks
carbs clean as a whistle. I'm under the impression it's lean, but plus looks fine
Mitch
2003 Jb crf450
maybe the jets gloged does it leak gas if it does the float might be stuck open and if your plug has white on it it is running lean
05 450r
Houser stem, Denton Stabalizer, Moose Fatbars, Baldwin Hot Start Cable, Hot Rod Crank, Moose Billit Clutch Basket, Moose Easy Pull Clutch Lever, pro motion twist throttle, Lonestar Carrier, Blingstar Heel Guards, Pced Fame(Black), Pced subframe(Black), Pced swinger(Black), PRM chassis Skid, Maier Hood, front hipers
04 tld pred
Full hmf sport pipe, pro taper bars, um nerfs, itp rims, pced frame and subframe and a-arms ( orange), pced swing arm shock springs and steering stem (black), cycra handguards, motion pro twist throttle, ims bumper, dg grab bar, moose chassis and swinger skids, spyder grips, k&n filter, pro design kill switch, front itp t9 beadlocks, rear douglas ultimate beadlocks
well I've just recentely cleaned the carb to a shine, no gas leaks, clogs, or stuck floats. I just need a carb expert to access the problem w/ my jetting.
Mitch
2003 Jb crf450