another one
another one
a picture of my brother racing his 450r at jolly roger in New Hampshire
now for my quad
2001 full walsh 250r frame with a blaster motor inside.
Mods ---> 01 Full Walsh 250r Frame ( Frame, Sub Frame, Swingarm, Steering Stem, A-Arms, and radiator), Full Bore 250r Plastic, Mike Walshes Old Graphic Kit, Clarke 250r Gas Tank, Tag2 Handle Bars, Pro Design Kill Switch, Tag Grips, Hipers All Around, Ipt Back Tires, Kenda Claw Front Tires, Elka QuadRate Front Shocks, Rear Elka QuadRate CR500 Link Custom Shock, X-Factor Propegs Nerfs, Front Bumper And Rear Grab Bar, Rpm Axle, Lock Nut, And Bearing Carrier, QuadTech Seat Cover,
Blaster Motor All Done Up Stuffed Inside ( Ported N Polished, V- Force Reeds, Carb ).
Dyno Port Custom HeadPipe/Silencer.
Motor That Came With Bike -
Duncan PC2000 265 Nikasil Powervalve, with Duncan Pipe, silencer and carb
heres my entry
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
Laeger stock geom frame powdercoated super mirror red and clear silver flake
Laeger FLIP TOP Show Chrome subframe
Laeger Pro Trax front end Show Chrome
Axis dual adj triple rate long travel shocks
Herman polished bilit resiviors powdercoated with red flake clear coat
Hardkor front cdale hubs
Gafler front wave rotors
Laeger -1 3/4" 250r link swingarm
Axis rear dual adj
Gafler rear wave rotor
Lsr antifade hub
Rpm dominator +4 axle
Hi-per rims
Renthal fat bars
Rtc clutch lever
400ex brake resivior and lever
Ricky stator billit lights
Ricky stator 200 watt stator /light flywheel
Oem Honda plastics
Clark 4gal tank
BWR graphic kit and number decals
Custom hood and shrouds by feather carbon
new cases, crank, tranny, 330 top end
ESR bilit Polished kick starter, motor mounts and shift lever powdercoated with a red flake clear
Hinson rear brake pedal
Custom atv innovations seat cover
Curtis sparks chrome pipe/silencer TT and MX
Afco oversized radiator
Custom BWR quick change clutch cover cover
powdercoated super mirror black with red flake clear, quick change piece engraved, etched and polished, then powdercoated with a clear red flake.
allen head stainless bolts
Ac bumpers nerfs grab bar
Hardkor billit brake resivior covers and throttle.
Gafler brake stainless kevlar brake lines
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
custom quick change cover with logo etched and polished
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
its hard to see the flakes unless the sunlight hits it but its trick!
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
you can see the suttle redflakes in this pic
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
you have any better pix of the subframe?i want to see exactly how it is designed,thanks
JOHN
New Jersey Devils
2008 YFZ 450...my new money pit
Filthy Revengence Racing
C&D Racing
B&K Performance
Click here to email me
AIM Devilsfan12
I am startin the Poll now. The thread is closed for entries.
Andy
WyoTech....
AIM; District3250rMX
Yahoo; Gone_Snowboarding06