has anyone ever heard of this company before a company called
hsd sells them
www.hsdracing.com
i ws contacted by them about doing a review for them so i was just curious if anyone else had any experience with them
has anyone ever heard of this company before a company called
hsd sells them
www.hsdracing.com
i ws contacted by them about doing a review for them so i was just curious if anyone else had any experience with them
06 450ER
they look ok, they have ball joint ends though but also have heim joints at the start of the arms. 690 bucks, hmm, look around a little more.
For every good post, there are 5 bad. If you remember that you will be fine
#37
Exriders.com
myspace/dave450r
they are wanting me to put them on my project quad so they would not cost near that, i think ill stick with my burgards
06 450ER
you're going with JRD's you said. they have ball joints. Stop with this heim joint thing. Post up a picture of a set of arms with heim joints. I've never seen or heard of any that use them. The closest to a heim joint is the laegar's protrax. Post up a pic of the one's that you're planning on buying.Originally posted by Jersey450R
they look ok, they have ball joint ends though but also have heim joints at the start of the arms. 690 bucks, hmm, look around a little more.
04 450R
i use denton lt's and they use all heim joints.
ok john, you want to see heim joints!.......ON JRD A-ARMS her you go. look at the end of the upper arms, THOSE ARE HEIM JOINTS! Now you know what they look like buddy.Originally posted by 450 Racer R
you're going with JRD's you said. they have ball joints. Stop with this heim joint thing. Post up a picture of a set of arms with heim joints. I've never seen or heard of any that use them. The closest to a heim joint is the laegar's protrax. Post up a pic of the one's that you're planning on buying.
and on the quad...
these are on the TRX 90 but do you get the picture yet???
For every good post, there are 5 bad. If you remember that you will be fine
#37
Exriders.com
myspace/dave450r
hey man why do you always get so pissed? What's the advantage of running an upper heim and lower ball joint over an arm set ups with upper and lower ball joints?
04 450R
you seemed agrivated that i wouldnt leave the heim joint thing alone, lol. im not pissed, i just wanted to show you the heim joints on the JRD arms. the advantage is they dont bend on hard landings where the screw of the ball joint goes in. And there isnt the black grease bootie on a heim joint, rather like a greased ball and socket if you can picture that. not mad at ya man
For every good post, there are 5 bad. If you remember that you will be fine
#37
Exriders.com
myspace/dave450r
We used to sell the HSD strong arms.
C&D Racing, the official sponsor of ATVriders.com and your #1 aftermarket and OEM parts shop! 402-614-2508
1st place +30 2010 IATVHSS
#28 IATVHSS 09 Polaris 525S and 525IRS
1st Place Industry Class 2008 Heartland Challenge
1st Place Industry Class 2007 Maxxis 12 hrs
www.cdracingonline.com
check out the products we carry http://www.cdracingonline.com/sell.html