Are you running hardened rockers with that? Any problems with it? Were the gains good?
Are you running hardened rockers with that? Any problems with it? Were the gains good?
Rider11x
2001 Honda 400ex XC Racer (SOLD)
2006 Yamaha Grizzly Realtree Camo
*Donegal Yamaha and Polaris*
****Tell them I sent ya!*****
I have the TC Cam in my motor, but it has not been ran yet, waiting on my frame. I just bought new stock valve springs and rockers when I got my cam. You do not need hardened ones and I just got new ones to be safe. It is suppose to be the best torque cam for in the woods, I can't wait to ride with it.
Thanks for the Support: Maier, Moto-Xperts, Rekluse, Teixeira Tech, Fox Racing Shox, BK Performance, DWT, Rath Racing, Quadtech, Streamline Brakes, Precision Racing Products, PowerMadd, Spider Grips, ASV Inventions, IMS Products, CV4, UNI.
im personally running the 924 MX cam in my motor. My buddy has a 440 XC motor with the TC cam in it that was set up by East Coast ATV and it performs awesome! I have ridden hotcams, TC's and web cams and the TC is the best one to me. The difference between my cam and his is that basically his has more bottom end and torque and mine is more hard hitting and high revving. When you get the cam from TC, tom will tell you that you can just drop it in, (and you could) but it is ALWAYS a good idea to at least get heavy duty valve springs and retainers and all that, because you will be putting some extra strain on your head, but you dont HAVE to and in fact most people dont.... Get the TC and you wont regret it. It is a TC 926 grind for the XC.....
-Paul
**Full TC 426cc national kit (rebuilt, back in business)**
-13:1 JE piston, national port+polish, lightened flywheel, port matched carb boot, TC 924 MX cam, TC hi rev CDI, oversize head stud kit, CRF cam chain, Carrillo HD rod, Sparks X-6 exhaust, FST auxillary oil cooler, PEP shocks, Laeger's +3 A-arms, JB Racing +1.25 swingarm, LSR axle, RPM tapered carrier, blue Maier plastic, Quadtech hood, Nacs graphics, seat cover, case saver, bar clamps etc, Renthal CR-Hi bend bars, Arens stem, Pro Design Pro Flow kit w/K&N, Outerwears airbox, snorkel hole + filter covers, RAD locknut, PEP E-Z pull clutch lever, Steel Braided brake lines, Razr MX tires, Douglas rims, Pro Armor nerfs, AC bumper, Rath seat latch, Motion Pro cables, WB e-brake block off, DID X-ring chain, Sidewinder sprockets, probably some more Im forgetting...
R.I.P Kelly Chang
i ahve the GNCC 926 Cam and i actually race MX with it. I love the cam, even when i had a stock motor with it, i noticed a diffrance right away. gobs of mid and top end without any loss of bottom end.. its an awesome cam. i recommend it
2001 Red 416ex #82
Parting out a 2000 Blaster
Click here For blaster Parts
Parting out a 2001 TRX400EX as well, PM me for information
Are you using hardened rockers, or heavier springs?Originally posted by Chanman420q
i ahve the GNCC 926 Cam and i actually race MX with it. I love the cam, even when i had a stock motor with it, i noticed a diffrance right away. gobs of mid and top end without any loss of bottom end.. its an awesome cam. i recommend it
Rider11x
2001 Honda 400ex XC Racer (SOLD)
2006 Yamaha Grizzly Realtree Camo
*Donegal Yamaha and Polaris*
****Tell them I sent ya!*****
no stock springs and rockersOriginally posted by RIDER11X
Are you using hardened rockers, or heavier springs?
2001 Red 416ex #82
Parting out a 2000 Blaster
Click here For blaster Parts
Parting out a 2001 TRX400EX as well, PM me for information
tc told me not to run heavy springs
06 Suzuki ltr 450 stock for now
Best cam I ever ran in the 'ole 400.Cam out lasted 2 400's no pits or chatter marks.Pricey but well worth the extra money.Drop in cam.
TC 926 XC grind
Big B
Thanks guys!
Rider11x
2001 Honda 400ex XC Racer (SOLD)
2006 Yamaha Grizzly Realtree Camo
*Donegal Yamaha and Polaris*
****Tell them I sent ya!*****