I've searched the forums, have the manual, and the instructions below. I know they are reverse threads. The first axle bolt backed away, but the larger one just won't budge. Any suggestions? I've heated it, WD-40'd it, muscled it, but nothing seems to be working. Please help!
remove both rear wheels
take off the right rear hub
loosen the chain and take off the rear sprocket....leave the 4 retaining bolts loose
take the caliper off the disk...tie them up out of the way
loosen the axle nuts...remember that they are reverse threads...
remove the clip and then take the axle nuts off...then the collar
remove the brake hub
remove the circlip, then the brake stay
drive the axle out from the throttle side to the clutch side
do the same with the bearing carrier...
for pics, just go to any website that has a parts microfiche(an exploded view of the parts) and use that as a guide...most have that area of the 400ex as 2 different diagrams...the swingarm and the rear axle/drivechain