1)Get some pvc glue or a good all purpose cement. ( If it does not have a swab for spreading the glue a q tip will work) 2)Spread it all along the inside of the grips.3) Slide the gip on the bars let is sit over night. 4) Wrap safety wire around both ends of the grips and the middle. Use vice grips to twist it tight or a safety wire tool. 5) Cut about 3/4 of the twisted part off. 6) Bend the rest of the twisted part up in to the grip use a hammer to counter sink it so that you dont not catch your glove on it.