Fram Oil Filter

[atvtrailrider]

I dont know how to install my Fram Oil fillter, for my 400ex. Could anyone tell me how?

There's a plate with 2 bolts holding it on,,on the right side of your motor,,that's were the oil filter goes,,ya might wanna drain your oil first,,,your owners manual will show you how to do this..

[atvtrailrider]

Thanks! We bought the quad used, so don't have an owner's manual handy. I'm trying to do this without my dad, so sorry if it sounded like a "too easy" question. I appreciate your help, instead of a snotty answer....

:square

Well this cover I'm talking about is the size of a coke can,,it's round,,make sure you install the filter the correct way,should be labeled on the filter. and you'll only need 2 quarts of oil for the job..

[4punksdad]

also,
there are 2 places to drain the oil from. one is on the bottom of the reservior, and the other is a small bolt near the shifter.

alos, if your oil filter came with a new O-ring, change it too.

when refilling your oil, you will only be able to get about 1.75 quarts into the bike. start it & let it run a few seconds. then shut it off & add the rest of the second quart.

[Leo]

www.exriders.com/tech/oil.shtml



Leo