Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: No low-end Power...help!

  1. #1
    Join Date
    Sep 2002
    Location
    North Jersey
    Posts
    3,981

    Unhappy No low-end Power...help!

    After a long day of riding, my quad will not wheelie at all. It has no bottom end power. It was fine all day and just started doing this. Could it be the clutch? Or maybe compression? Any help would be good...thanks.
    #72...Tricks up my Sleeve



    "I just don't want to die without a few scars"

    "Setting a goal is not the main thing. It is deciding how you will go about achieving it and staying with that plan" Tom Landry

    03 Tib GT2.7

  2. #2
    Join Date
    Feb 2004
    Location
    Memramcook, NB, Canada
    Posts
    379
    Did the temperture change at all,some times if its cooler at night maybe theres not enough air coming in.
    E.C. performance :
    grey/red yfz450 protaper,powermadd,sparks,k&n,ims\roll,itp...bomb squad ..!!


    black/yellow 416ex web,sparks,wisco,ac,protaper,k&n

  3. #3
    Join Date
    Sep 2003
    Location
    Long Island NY ( DIX HILLS )
    Posts
    1,276
    air leak?
    2001 400ex MXed

    www.whatwouldyoudiefor.tk

    long island hardcore ^

    Sponsors 2004 - NACS RACING

  4. #4
    Join Date
    Sep 2002
    Location
    North Jersey
    Posts
    3,981
    Checked for air-leaks..didnt find any.
    #72...Tricks up my Sleeve



    "I just don't want to die without a few scars"

    "Setting a goal is not the main thing. It is deciding how you will go about achieving it and staying with that plan" Tom Landry

    03 Tib GT2.7

  5. #5
    Join Date
    Jun 2003
    Location
    brentwood, ca
    Posts
    1,906
    Its hard to tell what you mean by no bottom end, is it running real bad and sputtering or is it just lacking power. It could be alot of things, valves might need adjusted, rings are going bad.

  6. #6
    Join Date
    Sep 2002
    Location
    North Jersey
    Posts
    3,981
    Lacking power. Runs fine
    #72...Tricks up my Sleeve



    "I just don't want to die without a few scars"

    "Setting a goal is not the main thing. It is deciding how you will go about achieving it and staying with that plan" Tom Landry

    03 Tib GT2.7

  7. #7
    Join Date
    Jun 2003
    Location
    gilbert SC
    Posts
    669
    is it smoking any
    Jarret Stone#1x
    250x
    AIM: JJs3600

  8. #8
    Join Date
    Dec 2003
    Location
    long island, new york
    Posts
    242
    mines been doing the same thing...like it runs fine no sputter or smoke or anything..but all low end torque is gone..it used to be hard to keep the front end down now it stays down..(well i wont say it stays down but its not the same doesnt come up as much) and theres no torque..i was riding with another 400ex hes stock mines jetted, wb slip on, and k&n...he took me fof the line..idunno im thinking my valves need to be adjusted? if u find out whats wrong with your let me know man..thanx

  9. #9
    Guest
    thats really wierd what kinda terrian were u riding in? try it tomorow after u get home from work/school and see what it does.

  10. #10
    Join Date
    Sep 2003
    Location
    Hermiston, OR
    Posts
    2,916
    Check your valve clearance and compression test your quad. Squirt some oil in the spark plug hole and compression test it again, if compression comes up significantly you need rings.
    Tony

    Arens Axis XC 310R

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •