Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: has anyone tried this?

  1. #1
    Join Date
    Oct 2003
    Location
    Mass
    Posts
    906

    has anyone tried this?

    20x11x8 holeshots on the rear of a trx90?

  2. #2
    Join Date
    Apr 2003
    Location
    north carolina
    Posts
    498

    Re: has anyone tried this?

    Originally posted by KILLER EX
    20x11x8 holeshots on the rear of a trx90?
    i think those are way to wide for that little 90
    being that height it would be ok in little amounts of mud
    but it would probably take away a lot of power
    jmo
    2005 Black 450r
    -AC nerfs,grab bar,bumper
    -LRD slip-on exhaust
    -K&N air filter w/removed air box lid
    -Bugard rear beadlocks w/Kenda Klaw MXR's
    -ITP t-9 front wheels w/Klaw mxf's
    -Lonestar pb block-off

    -more to come soon-

  3. #3
    Join Date
    Feb 2004
    Posts
    1
    Thats way to much tire for that bike. Will they go on yes. Will it turn them yes, but will rob tons of power Yes and will make it harder to turn. Adult size 450 mx quads run a smaller tire than that! I have found the best size for that bike is 18X6X8.

  4. #4
    Join Date
    Feb 2001
    Location
    Robbinsville, NJ USA
    Posts
    2,187
    when I shopped for tires for my sons I was very concerned with weight. I didn't get extra plies because of it. I picked 18X9 Shredders on the stock rims. It would be better with some aluminum wheels. The quad didn't lose any power with these tires and it turns and handles great. It also has custom made wheel spacers, 2" rear and 1" front.
    John, 300EX, 2-250Xs, TRX90, ATC70, 3 JD sleds, 17.5' Hydra Sports boat, 2000 Ford F350 Lariat Crew Cab Diesel with a DP Tuner 3 pos. chip

    Special thanks to Kenny for helping us with my sons project quad!
    BK Performance
    Custom Powder Coating

  5. #5
    Join Date
    Apr 2002
    Location
    North LAs Vegas , NV
    Posts
    31,685
    Originally posted by quadfamily
    when I shopped for tires for my sons I was very concerned with weight. I didn't get extra plies because of it. I picked 18X9 Shredders on the stock rims. It would be better with some aluminum wheels. The quad didn't lose any power with these tires and it turns and handles great. It also has custom made wheel spacers, 2" rear and 1" front.
    good choice I went with Fast Trekker 18 inch tire.A 20 is WAAAYYY too much
    http://qjsimaging.com/

    -2002 Duncan 440ex-
    Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper

    2007 Suzuki LTR450
    FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers

    2008 Raptor 250 BUILD IN PROGRESS!
    Thank you 2010 Sponsors
    and Contributers!!

    Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
    ASV,Motoworks,QuadTech,Streamline,
    RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging

  6. #6
    Join Date
    Feb 2001
    Location
    Robbinsville, NJ USA
    Posts
    2,187
    I forgot to mention that since the tire is shorter then the originals, I installed a front sprocket with one more tooth to make up the difference.
    John, 300EX, 2-250Xs, TRX90, ATC70, 3 JD sleds, 17.5' Hydra Sports boat, 2000 Ford F350 Lariat Crew Cab Diesel with a DP Tuner 3 pos. chip

    Special thanks to Kenny for helping us with my sons project quad!
    BK Performance
    Custom Powder Coating

  7. #7
    Join Date
    Oct 2003
    Location
    Mass
    Posts
    906
    i just put on 20x11x8 holeshot xcr 03 on itp t-9 wheels on the 90 and what a differance it handles 100 times better and the traction is incredible very stable!!! i also went down two teeth on the rear sprocket. the top end speed is incredible i cant wait to break out the gps tomorrow and get a top speed reading.

  8. #8
    Join Date
    Apr 2002
    Location
    North LAs Vegas , NV
    Posts
    31,685
    Originally posted by KILLER EX
    i just put on 20x11x8 holeshot xcr 03 on itp t-9 wheels on the 90 and what a differance it handles 100 times better and the traction is incredible very stable!!! i also went down two teeth on the rear sprocket. the top end speed is incredible i cant wait to break out the gps tomorrow and get a top speed reading.
    whaaaa???????? What tires are you running on the front??? I smaller tire like a Fast trekker will give you stablility also, but ALSO lower center of gravity. Well I guess each to there own if you like it then . I have to ask....... Your Bottom end speed must really be slowed down....... Right???Im just curious why you would want it geared this way????
    http://qjsimaging.com/

    -2002 Duncan 440ex-
    Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper

    2007 Suzuki LTR450
    FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers

    2008 Raptor 250 BUILD IN PROGRESS!
    Thank you 2010 Sponsors
    and Contributers!!

    Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
    ASV,Motoworks,QuadTech,Streamline,
    RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging

  9. #9
    Guest
    you need to get a pipe for bottom end big time...trx90's aren't meant for that

  10. #10
    Join Date
    Oct 2003
    Location
    Mass
    Posts
    906
    the bike is only 1/2 in. more off the ground with the 20. the stock tire was a 19 i rode it all day today and the thing is a 200% improvement.i went down two teeth on the rear sprocket so i have even more top end.this bike does not lack in the bottom end in the least!!!and flies on top end even with my 250 lbs butt on it! my daughter is only 70 lbs with full riding gear.the bike only has a pipe and k+n filter. i am in the process of building a 126cc strocker for it.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •