Results 1 to 4 of 4

Thread: hp on worked 250r?

  1. #1
    Join Date
    Dec 2003
    Location
    South Jersey
    Posts
    1,355

    hp on worked 250r?

    how much hp do u think a 86 250r with a fmf full exahust, ported n polished cylinder, boed .60 over , wiesco piston ,boysen reeds, pro design cool head, k&n air filter, and a 38 mm kehin carb? thanks
    2002 400ex
    Burgard,PEP,AC,K&N,White Bros,Pro Taper,Duncan,Maier,Cycra,ITP,Radial,RPM,Galfer,Pro Design,Scott
    SOLD

    1988 250x
    Renthal,Acerbis,Tamers,Radials,Burgard,Douglas,+2a rms,Stream line,Uni,DMC,Duncan,Moose,Weisco, White Bros

  2. #2
    Join Date
    Dec 2002
    Location
    San Jose, CA
    Posts
    2,227
    Probably in the High 30's, low 40's. More if it is built right, and properly tuned.

  3. #3
    Join Date
    Dec 2002
    Location
    englishtown NJ
    Posts
    3,698
    I would say high 40's at the peak, about 38 in normal conditions, this is at the crank not rear wheels. they made 38 stock(crank) pipe will add a few and the combo of mods would add about 10 or so. but real wolrd power would be about mid to loww 40's at the top
    85/86 atc 250r, very modded, lrd 310pv, +1 lsr, shortrack kit, cr250r igntion, 39 pwk, paul turner hi-rev pipe, propeg nerf bars, HREATV custom frame,
    86 atc200x- 84 250r exteneded axle, supertrapp pipe, 27mm carb, works rear shock, 84 250r front end(rebuilt w/ terry kit), 350x tripples, ported head, 12:1 piston, webcam,
    crf450r quad, lsr frame, swinger, antifade, hyper beadlocks and the best of everything else.
    88 trx 250r pced and reinforced frame, +3+0 t-pin, 310pv, cr ignition, 39 pwk, lsr rear end, elka shocks, aftermarket radiator, lrd pipe
    06 ktm450exc, full skid plate/guards, radiator fan, clarke tank, dual sport kit, reg/ins/insp, steering stabilzer
    98 200exc: street plated, skid/guards, dual sport lights, stabilizer and more.
    07 ktm 250xc, skids, reg/ins, dampener, good lights
    2011 atc450r in the works, suspension and details need to be worked out

  4. #4
    Join Date
    Nov 2002
    Location
    Oregon dunes
    Posts
    1,386
    Originally posted by deathman53
    I would say high 40's at the peak, about 38 in normal conditions, this is at the crank not rear wheels. they made 38 stock(crank) pipe will add a few and the combo of mods would add about 10 or so. but real wolrd power would be about mid to loww 40's at the top
    Stock they were closer to 30 or high 20's.
    Depends on the porting, coolhead dome size, and other variables. I'd say you are probably between 35 and 50.
    '86 trx350r- fully custom, more than you can imagine
    For Sale or trade for 600+cc street bike:
    "Casper": '86 Suzuki LT250R, 600cc Kawasaki ninja 4 cyl motor-12,000rpm screamer
    '98 Banshee 370- extremely ported by Packard/Ripps

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •