|
|
District 6 MX
Just trying to figure out exactly where I should have my air/fuel screw set at on my 41 FCR with my 440 engine. I'm having problems keep the idle smooth, it idles almost like a Harley and I'm also getting that "bog" when dumping the throttle. I'm assuming that I'm too rich on the bottom.
Any help would be appreciated....Thanks!!
www.hellboundracing.com
2000 440ex
Laeger's, Lonestar, Hinson, TC Racing, CT Racing, Pingry's, RPM, Ohlins, TAG Metals, AC Racing
....thanks to Mike @ Hellbound, AC Racing, RRP, and Scott Powersports
C&D Racing
Start the the fuel screw 1.5 turns out on that setup with a 52 pilot. Make sure you give it time to warm up before you make any other adjustments.
C&D Racing, the official sponsor of ATVriders.com and your #1 aftermarket and OEM parts shop! 402-614-2508
1st place +30 2010 IATVHSS
#28 IATVHSS 09 Polaris 525S and 525IRS
1st Place Industry Class 2008 Heartland Challenge
1st Place Industry Class 2007 Maxxis 12 hrs
www.cdracingonline.com
check out the products we carry http://www.cdracingonline.com/sell.html
District 6 MX
Colby.....that fuel screw that you sell....what exactly does it do? Is it just something to make easier to adjust without turning the carb and getting a long screw driver up in there?.....also, thanks for the advice!
www.hellboundracing.com
2000 440ex
Laeger's, Lonestar, Hinson, TC Racing, CT Racing, Pingry's, RPM, Ohlins, TAG Metals, AC Racing
....thanks to Mike @ Hellbound, AC Racing, RRP, and Scott Powersports
Posting Permissions
Reply With Quote