Results 1 to 4 of 4

Thread: correct way to check oil?

  1. #1
    Join Date
    Nov 2001
    Location
    San Diego
    Posts
    221

    correct way to check oil?

    this is a stupid question, but i need to make sure. when i check oil on my 250ex or any other bike for that matter, do i check it with the dipstick screwed all the way in or just with it sitting on top of the hole? It makes a big difference in the level, so i want to make sure..

  2. #2
    Join Date
    Jan 2002
    Location
    Akron, OH
    Posts
    1,311
    In my manual for my 400EX, they say to let it idle for five minutes, longer in colder temps, unscrew dipstick, wipe off, and set it in the hole without screwing back in.


    My Yamaha manual says the same thing.
    04 Camo Suzuki Vinson

  3. #3
    Join Date
    Nov 2001
    Location
    San Diego
    Posts
    221
    darn.. that means i've been running it too low because i've always checked it with it screwed in... i'll fill it up before the next time i ride.. the thing is.. it came from the dealership with the oil that low so i figured that's the way to check it..

  4. #4
    Join Date
    Aug 2001
    Location
    VICKSBURG MISSISSIPPI
    Posts
    2,194

    i usually...

    set mine on the hole.give it a half turn just enugh to set the threads and make it read even ...check it that way...
    W1DE5PREADPANIC@AOL.COM

    TAKE IT FROM A PRO
    ......JUST SAY NO......

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •