Other than the stock gearing is too high and the tires are not the best. it is a good quad. I have been racing mine xc and the only problem is the right lower ball joint went bad. There have been some reports of the top frame mount breaking just in front of the top motor mount. If you are looking to buy new then wait for the 04. The 04 they fixed the top motor mount by welding the bracket in instead of bolting it in which weakened the top frame rail. New supplier for ball joints, beefed up. 4/110 honda rear bolt pattern on 9 inch rims instead of the 4/156 10 inch rims.
Overall I am happy with my Predator. The power is awsome after adding either a 13t front sprocket or a 38 or 39 rear. Handling is smooth and sweet with the adjustable compression at the twist of a knob on the rear. I am looking into getting rezzies for the front soon. I put some Holeshot xcr-03 on the rear that really hook up good. I have also heard the maxxis razor 2 are a good set up but I haven't run them myself. Jumping the predator is comparible to my 400 ex with works trs just softer landing. Add aftermarket pipe (I got a HMF) and it will be all you need.
Any questions let me know..
2003 Predator, Hiper rims, Kenda tires, PRM protection, Renthal bars with Spider Grips, Fox TRS w/rezzies, much more to come.
1999 400 EX Hot cams stage , K&N filter, air box modw/outerwears, ,14 T front sprocket, Pro Circuit T-4, Works Triple rate w/o rezz, coustom made skid plate and a-arm gaurds. PRM bumper
MSN: Braff1@bellsouth.net
AIM: Braff51
"QUAD HATERS SUCK"
"Don't make me put this 400 in Reverse to come back there and smack you"