Results 1 to 6 of 6

Thread: question about bolt

  1. #1
    Join Date
    Sep 2003
    Location
    Long Island NY ( DIX HILLS )
    Posts
    1,276

    question about bolt

    hey a bolt broke and went inside a little hole its not screwed in but simply like slipped in i tryed a lot of things getting it out have any ideas

    tryed

    flipping the quad over and taking it out

    vacuuming it out lol

    never came out

    by the way its bolt 2 on the oil filter cover ( the longer one)
    2001 400ex MXed

    www.whatwouldyoudiefor.tk

    long island hardcore ^

    Sponsors 2004 - NACS RACING

  2. #2
    Join Date
    Jul 2003
    Location
    MS
    Posts
    675
    Ok, i'm confused.

    Are you saying the bolt is broke off in there tight when you were using a wrench on it?

    Or are you saying the bolt is broke but "slipped" in there - not tight??

    If so how the hell do you do that?


    You can get it out by drilling a smaller hole into the bolt itself & go get some ez outs at the hardware store.

    They will know what You need.

    you will be able to figure it out from there.

    07' 450R
    07' FOREMAN ES
    09' TRX250X
    86' ATC250SX

  3. #3
    Join Date
    Sep 2003
    Location
    Long Island NY ( DIX HILLS )
    Posts
    1,276
    well i thought the bolt was tight in there broken ( i got this quad used like that ) i was riding around a lot and it never fell out... well today when i changed my oil i pushed it in like a quarter of and inch to a half of an inch and i was like oh ****.......... i tryed alot of ways to get that **** out it was all the way like almost out and then sliped in.......... ( the longer bolt of the oil cover case ) i fliped the quad over on its side and tryed getting it out and a vacuum LOL please dont call me a retared i was desperate!!! have any other ways besides drilling into it?
    2001 400ex MXed

    www.whatwouldyoudiefor.tk

    long island hardcore ^

    Sponsors 2004 - NACS RACING

  4. #4
    Join Date
    Sep 2003
    Location
    Long Island NY ( DIX HILLS )
    Posts
    1,276
    oh and so in that case it slipped in there broken
    2001 400ex MXed

    www.whatwouldyoudiefor.tk

    long island hardcore ^

    Sponsors 2004 - NACS RACING

  5. #5
    Join Date
    Jul 2003
    Location
    MS
    Posts
    675
    Not without pulling the right side of the case off, even then I don't think the threads go all the way through. I'm sure somebody here does.

    If you aren't comfortable drilling either find someone that is, or just (& I hate to say this real bad) but take it to the dealer.

    But if U gotta ride use the one bolt & seal the cover w/some RTV room termperature vulcanizing silicone from the auto patrs store let it cure at least 12 hours.

    It'll take the heat wont harden up on your case & make a good seal. just watch it real close & get it fixed right or you'll probably be sorry.

    07' 450R
    07' FOREMAN ES
    09' TRX250X
    86' ATC250SX

  6. #6
    Join Date
    Sep 2003
    Location
    Long Island NY ( DIX HILLS )
    Posts
    1,276
    its ok, i have no way getting my quad there which sucks... i have a trailer but no hitch for the car... do you know where they sell hitches for a 2002-2003 maxima? a full one or maybe a bumper hitch? bumper hitch would be easyer
    2001 400ex MXed

    www.whatwouldyoudiefor.tk

    long island hardcore ^

    Sponsors 2004 - NACS RACING

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •