|
|
Senior Member
my friend has a crapter and a banshee and i cant catch him on the long straight ways ...ill be toped and hell just leave me standing there like i was nothing...i wanna know how i can make my 400 stomp those into the ground. 8D .. any sugestions are welcome
03 yellow 400 ex
baja skids(a arms,belly,and swing)
20x11x9 xcrs on .190 douglas rims
11:1 piston, stage 2 hotcams, heavy duty camchain, hmf slipon
!Chan Racing!
depends on how much u wanna dump into it....... but the basic ruit is to go.....
416 bore
11:1 compression
Exhaust
cam
now if u want to get a little more serious get it ported and a bigger carb.
an if u REALLY wanna spend money stroke it
2001 Red 416ex #82
Parting out a 2000 Blaster
Click here For blaster Parts
Parting out a 2001 TRX400EX as well, PM me for information
Sand Rat
/\ /\ Ya, what he said.
Check my mods below. I have yet to line up against a piped Raptor that can pull on me. Along with the motor mods, change to a 16t front.
05 450R
02 400EX
02 Kasea 90
Fo Fiffty B*tch
yeah get your motor built. but ur gonna wanna atleast have 2000 to spend
06 450r..gutted pipe, rev box mod,shaved fenders, C&D racing sitckers...lots more to come..aint got any money right now
98 cr125..sst pipe, shorty silencer, rad valve, tag fat bars, wiesco piston,many mods....for sale
AIM-Diedrich5
Posts: 1 Billion and goin
nah not that much....do it yourself spend 800 bucks and be done
C&D Racing
I agree with castor I have built alot of budget 416 motor for guys that will run toe to toe with a piped raptor without a problem. When you buy a motor kit from most builder and do it yourself you are spending to much money they are not sending you anything that you can't buy elsewhere for less with the same results.
C&D Racing, the official sponsor of ATVriders.com and your #1 aftermarket and OEM parts shop! 402-614-2508
1st place +30 2010 IATVHSS
#28 IATVHSS 09 Polaris 525S and 525IRS
1st Place Industry Class 2008 Heartland Challenge
1st Place Industry Class 2007 Maxxis 12 hrs
www.cdracingonline.com
check out the products we carry http://www.cdracingonline.com/sell.html
Moderator
Yeah, what they said.
A big bore kit with a cam will run with a raptor, and you can probably install it yourself for a total cost of roughly $800
A complete package of big bore, cam, headwork, carb, and possibly a stroker crank will eat a raptor alive, but you can't do it yourself. Total cost of roughly $4000
Duncan Racing 340PV, +2 A-arms, +4 LSR axle, and a host of other goodies.
Sand Rat
Yup, $800 is what I spent on mine. Then I added a FCR so throw in another $400. The motor work got me neck and neck with piped Raptors. The carb put me 1-2 bike lengths ahead.
05 450R
02 400EX
02 Kasea 90
Junior Member
Yeah, go ahead and do all the mods listed above and I will still destroy you with my banshee.
Moderator
only in the sand...Originally posted by nickthompson77
Yeah, go ahead and do all the mods listed above and I will still destroy you with my banshee.
Duncan Racing 340PV, +2 A-arms, +4 LSR axle, and a host of other goodies.
Posting Permissions
Reply With Quote