I have a 2001 400ex and the clutch is hard to pull. The clutch seems to be working fine, but my hand is getting worn out.
Any suggestions???
Oh yeah I replaced the cable and that was not the problem
I have a 2001 400ex and the clutch is hard to pull. The clutch seems to be working fine, but my hand is getting worn out.
Any suggestions???
Oh yeah I replaced the cable and that was not the problem
mine was hard to pull in but its a 87 i just put some wd40 down the clutch cable and it was easier or u could replace it. it might be something else but thats what it was for me
for sale
2002 trx400ex
white bros pipe(broke)
zr6 pipe
powerbomb
durablue hubs
rad dual row
new front and rear tires
honda 87 250x
Magura Hydraulic Clutch
-Kevin-
GNCC #444
2013 Junior B Champion
Thanks to my 2014 sponsors:
Lexington Motorsports, MSR, Schaeffer's Racing Oil, WKC Powersports, GT Thunder, Wiseco Pistons, Precision, Spy Optics, Spider Grips, Panda's Powdercoating, Roll Design, IMS, Blingstar
Lube the cable it will help. Or replace the cable with a new one it will be alot better
C&D Racing, the official sponsor of EXriders.com and your #1 aftermarket and OEM parts shop! 402-614-2508
#13 IATVHSS 06 TRX450ER
08 Heartland Challenge Industry class 1st place
08 IATVHSS Womens class 1st place
07 Maxxis 12hr Industry class 1st Place
07 IATVHSS Womens class 1st place
06 IATVHSS Womens class 1st place
05 IATVHSS Womens class 2nd place
I agree, bought one for my R and love it!Originally posted by cheetah
Magura Hydraulic Clutch
Get a new cable, it will help. Make sure you route it correctly. Mine was very hard to pull and I looked at the cable and it was starting to fray. My buddy's 400ex was starting to get a little harder to pull so we lubed the cable up and it helped. Check your cable to see if you need a new one or if yours just needs lubed.
buy the $10 cable luber from whoever. I just replaced my original stock clutch cable after 3 years of use because i lubed it with a cable luber every month. I could tell a slight difference after switching it with a new one. They are worth their weight in gold i think..
Originally posted by Silverfox@C&DRacing
Lube the cable it will help. Or replace the cable with a new one it will be alot better
Jerry
Quadless again!!!!
Originally posted by Z400/400ex
Oh yeah I replaced the cable and that was not the problem
Hey yo mofo's.... he already replaced the cable. If you have the cable routed right (no kinks - kinda hard to get a kink) and have it adjusted properly...it should pull in pretty nice. Either you have some internal clutch problems or you need to work on your grip a bit.
Eric
- '00 400EX
...with some stuff.
numbnuts jerry up there ^ his lever is really hard to pull but hes got real strong forearms cuz his wife works nights!