Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: how to judge

  1. #1
    Join Date
    Oct 2002
    Location
    Arizona
    Posts
    321

    how to judge

    Out where we normally ride there are a few table tops and I jump them just fine. Today we found a nice double. How do I know what gear I need to jump it in with out over jumping or nailing the landing ramp?



    Thanks

  2. #2
    Join Date
    Sep 2001
    Location
    Iowa
    Posts
    1,628
    just gotta know..

    after riding so long you can figure out what gear you need to hit it in. But i usually take a few small hits at it first to see the way the lip is .. but on a 300 i usually have to hit most of my jumps in 4th..
    - #48 2004 BLUE YFZ 450 -
    One Industries - AC nerfs - Ac Full Skid - AC Bumper - Pro Design Kill Switch - Shockpro shockcovers - PEP Chain relocator - Bullet Parking block off - Motion Pro Twist Throtle - Cam Mod -

    Jetting 170 main - 48 pilot - stock needle 5th clip - fuel screw 2 and 3/4 turns - runs awesome

  3. #3
    Join Date
    Dec 2002
    Location
    Ohio
    Posts
    1,101
    compare it to the tables. make a height and angle check of the take off ramp. compare it to the table. watch your buddies jump it to make sure you have enough. watch them be the testers. and remember its always better to jump to far then to short.
    The little EX is gone, but not forgotten

    '04 400EX. Shockwears Shock Covers, DG Nerfs, Parking brake block off, aftermarket clutch perch.

  4. #4
    Join Date
    Oct 2002
    Location
    Arizona
    Posts
    321
    The ground is so messed up between the jump that I cant just roll over it to test it and If i land to short on that stuff even if i dont hit the landing ramp Im going to be hurting pretty badly.

    It is nothing like the table tops I jump. It is way steeper. The only person I have ever seen jump it was a 20 year old on a yz250. He jumped it in 3rd.

  5. #5
    Join Date
    Dec 2002
    Location
    Ohio
    Posts
    1,101
    if that dude hit that in third on his yz. you better be hauling balls to make the jump. just dont do anything beyond your skill. i forget who was talking about this before. make sure your 110% sure. just keep rolling up to it, think about. get some balls and go for it.

    watch the guy on the yz. how fast he was going. and probally go just a little faster because he was on a bike and your on a quad.
    The little EX is gone, but not forgotten

    '04 400EX. Shockwears Shock Covers, DG Nerfs, Parking brake block off, aftermarket clutch perch.

  6. #6
    Join Date
    Oct 2002
    Location
    Arizona
    Posts
    321
    I dont know him and I only saw him there once so I cant watch him again. He was flying when he went over it.

  7. #7
    Join Date
    Apr 2002
    Location
    lake charles, louisiana
    Posts
    1,306
    how i do it, i just roll over it a few times, then just do it, and remember better to over shoot then case
    2001 yamaha raptor, 909 bars, durablue +2 axle, kn filter, durablue wheel spacers,white bros R-4, dg nerfs, dyno jet kit

    2001 xr50, BBR bar kit, applied fork springs, applied shock spring, mulisha graphics, sik 50s clutch/springs, street tires, hand brake kit

  8. #8
    Join Date
    Jan 2003
    Location
    New Haven,Kentucky
    Posts
    2,048
    after a while you can just figure those things out. just hit it or you never will, you can think about it all day long but it wont matter if you never hit it. but dont do it unless your 110% sure or are willing to take the consequences of a crash on that jump,good luck
    Cody
    2004 Yamaha YZ250F


    2001- Yamaha YZ250F-SOLD
    1999 Honda 416ex-SOLD

  9. #9
    Join Date
    Apr 2002
    Location
    Canada, Ont
    Posts
    4,581
    Does anyone else hit it? If so just follow them to just judge the speed etc. If not, well I would wait to see if someone else will....

    Good luck!
    94 4trax 300 4x4 01 MXZ 700 01 400ex 86 250R

  10. #10
    Join Date
    Feb 2002
    Location
    ohio
    Posts
    2,389
    dude, just do it, you know your gonna regret it if you dont
    .................................................................
    .................................................................
    .................................................................
    .................................................................
    ..............................330ex..........................
    .................................................................
    .................................................................
    .................................................................
    .................................................................


    GT THUNDER
    www.gtthunder.com

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •