i have a curtissparks x-6 pipe and i cant get the outer shell cover to come off to change the packing. ive took the 3 allen bolts off and even tried to bang it off with a dead blow hammer. its seized on. Anyone have any ideas to get it off?
i have a curtissparks x-6 pipe and i cant get the outer shell cover to come off to change the packing. ive took the 3 allen bolts off and even tried to bang it off with a dead blow hammer. its seized on. Anyone have any ideas to get it off?
buy a lrd
~ MHSC ~ Martin B.#713
~Thanks to all the 06 sponsors~ Elka Suspension, GT Thunder, IMS Products, Nacs Racing, JH Racing, Hiper Wheels
~Thanks to all the 05 sponsors~ Elka Suspension, Denton Racing, Nacs Racing, IMS Products
08 HD Sportster
O4 450R
00 Silvarado 1500 Z71
RIP Colton Jenkins 1988-2005
sorry dude, but i wanna get the most horse power and thats a sparks pipe
Too funny, and there such different pipes too
I would first try a little heat, but be carefull not to over do it.
If that doesnt do the trick then I have had luck with a slide hammer and you just need to find a way to attach it to the end cap.
otherwise theres allways the sawzall
thanks man ill try something, an lrd pipe, lol i didnt say i wanted to lose power
No prob man good luck.Originally posted by curtissparks400
thanks man ill try something, an lrd pipe, lol i didnt say i wanted to lose power
Seriously though look at those pipes (the silencers anyhow) closely and see how much they are alike, and how similar they both are to the original supertrapp 4" set up just minus the discs, but if you get the spark arrestor for either then its the same set up.
Funny how things are in this stuff