Jetting LRD 300R??

[RUNMYTA]

I just picked up a LRD 300 big bore for my 250R. Can someone put me in the ball park on the jetting. Here are my mods:

LRD 300 big bore on 89 engine
ESR TR6 pipe/silencer
Rad Valve with spacer
36mm TMX carb
Stock Air box, foam filter, with lid on.

TIA Mike

[methyman]

Best thing to do is call LRD and ask them where to start.
503-885-9200.

[RUNMYTA]

I called earlier today and talked to some guy (Not Arlan). He said that LRD doesn't use TMX carbs and they don't have jetting specs for them Surely someone is running a setup close to this

[methyman]

You can try ESR, maybe they can help you out. They sell the TMX carb.

Eddie Sander Racing
1510 E. Main St. Unit C
Visalia,CA 93292
Phone: (559) 625-3157
Fax: (559) 625-5356

http://www.paragondesigns.com/esr250...sp?CatalogID=2

[RUNMYTA]

I called ESR and they told me that my jetting should not change!! If it did it would only be 1 size larger on the main

Does this sound right?? I am going from a stock, unported cylinder to a fully ported 300!

[powerslider]

2 sizes larger on the main, do plug chops at various throttle positions...