I just put my 06 r back together and it will not start. New 12.5:1 cp piston and the valves were recut and replaced with kibble white +1 exhaust and stock sized intakes. I had him do a mild port job on it, it has a stage 2 cam that I had in it previously. Fresh 93 gas and it will not fire. It has a 48 pilot and 175 main in it right now that I was running with a stock piston and head just with the cam and a full hmf exhaust and air filter. I had a local well known performance shop do the head work but his main focus is on v8 racing engines. The intakes are set at .006 and exhaust is .011 any pointers that might be causing it not to start or questions I can ask the shop that did the work? Thanks!