Results 1 to 3 of 3

Thread: lt 80 oil injector pump

  1. #1
    Join Date
    Jan 2014
    Location
    hampton nj
    Posts
    49

    lt 80 oil injector pump

    i want to block off oil injector cause it is putting to much oil in the quad pulled plug today and it had some oil on it so i want to mix the gas my self how would i get that done and how much would it cost and how do i do it. the quad is all stock from what i know not bored out stock pipe all stock got the quad yesterday the bike runs great but it smokes alot at full throttle and a little less then full throttle.

  2. #2
    Join Date
    Mar 2004
    Location
    East Springfield Pa.
    Posts
    2,370
    You should pull the clutch cover and remove the lil black plastic piece on the end of the crankshaft that runs the pump.
    After that you can stick something on the lil brass piece where the oil goes into the carb.
    32:1 with a good synthetic oil.
    2000 GNC 5N\
    2001 GNC 9N \ 40+ class
    2004 GNC 9N /
    2014 rock crusher "GO tortoise GO!"
    2016 Byrd Rooster
    Father of the "11" time National champion,and worlds fastest woman ATV racer
    A few fast LT80's
    250R~300cc's
    300ex
    350 Rancher
    Kymco Mongoose
    Survivor of the 12 Hours of ATV America 04 and 05

  3. #3
    Join Date
    Jan 2014
    Location
    hampton nj
    Posts
    49
    ok thank you
    Quote Originally Posted by LT80 View Post
    You should pull the clutch cover and remove the lil black plastic piece on the end of the crankshaft that runs the pump.
    After that you can stick something on the lil brass piece where the oil goes into the carb.
    32:1 with a good synthetic oil.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •