450r spindles with DC arms.

[Keith J]

I have everything bolted up and the only problem I have found so far is the drr tie rod ends are too big for the honda spindles. They are the 04/05 spindles.
Anybody ever done this? Want did you do to fix. Different tie rod end or ream/machine out the spindle?

Thanks for all the help

[nastynotchback1]

I would call up G-Force and get his Allballs tierod kit and install that.It will require some mods but will be stronger and i think you will be better off in the end.

[wickestangwv]

I used the 450 Tie rod ends in my Apex Tie rods

[Keith J]

Thanks guys. I appreciate it.

[Keith J]

Gonna bring this one to the top again.
I got the tie rod end situation figured out.
Has anybody on here ever run this setup? I have a few questions.
Really need help. We have a race next weekend and this is all that is keeping me from finishing this deal up.

Thanks

[wickestangwv]

I have 450spindle set up on a apex.