Results 1 to 3 of 3

Thread: Teather kill switch...not workiing

  1. #1
    Join Date
    Dec 2008
    Location
    Hazleton, PA
    Posts
    361

    Teather kill switch...not workiing

    Ok, I wired up the bike the way G-force has on their website but if i try to ground out the coil or the stator to kill the engine it does nothing. Only way to kill the engine is pull the hot wire going to the coil. The teather works fine as I ohmed it out. Maybe I'm doing somnething wrong? I didnt run a ground from the engine to the frame as I was getting continunity from engine to frame with no ground strap. Any ideas?

  2. #2
    Join Date
    Dec 2008
    Location
    Hazleton, PA
    Posts
    361
    I'll answer my own question! LOL Well I installed one of the "racing" CDI that come with a new DRR, got it from a friend, and wired it the same way. Now the engine dies when you ground out the coil. So it looks like there is something wrong with my stock coil.

  3. #3
    Join Date
    May 2012
    Location
    Hayes, VA
    Posts
    229
    I would have tried to help but i'm a electrical retard so sorry.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •