cobrar bog
Originally Posted by
desratt
it is a jetting issue.
Sounds like jetting. But, I have seen a few Cobra shifters come out of the factory with gearing way out of wack. ( 15/38 once .)
If its a d slide try 142 main, clip at 2nd and 35 pilot. gearing try a 13/48 and go from there. You will be real close.
also beware of the petcock. ( the inner filter is junk, we replaced ours with a motion pro hi flow petcock). ( also, if u run oxygen fuel the glue inside the tank with get soft and mix w the gas. drain it every ride and flush w reg gas during week)
ATV OUTLAWS RACING TEAM, HONDA EAST TOLEDO,COUNTRY GRAINS BREAD CO.,
ELKA SUSPENSION, FIERCE POWERSPORTS, PRO TAPER,
GOODMAN RACING. RAGE ENGINES. FLY RACING, WALSH RACECRAFT, HINSON CLUTCHES,FOURWERX CARBON, MAXIS TIRES
Joe Scarrow trainer/ coach and tech.
Ryan Korody # 925 2014 450B and Production B National Champion