Purchased a DRR with a deleted harness. I am trying to wire back the starter, starter switch headlight and taillight with a used harness any help would be appreciated.

Right now I have the following hooked up.

Starter relay 4 flat Hard plastic connector near battery cables

2 resistors

Cdi which all wires from it look connected

Coil

Tether one side to ground other to hot side of coil.

Voltage regulator green plug

Head light and tail light.

Starter wires are connected

The wires I have no clue about.

Single black wire coming off of The switch but harness appears not to have a connection.

2 small sepearat wires one pink one brown with small blade female connectors

2 large blade connectors separate wires one green/yellow and the other brown.

One pink wire by its self in a 4 prong hard plastic connector

All of the previous wires are near the front of the harness.

I have one wire which is brown comes out near where you would hookup to the cdi but comes off of the harness it is female.

Any help would be appreciated.

Thanks matt