Results 1 to 6 of 6

Thread: Can-Am DS-650

  1. #1
    Join Date
    Sep 2013
    Posts
    3

    Can-Am DS-650

    This is not a stock bore & stroke motor.
    Attached Images Attached Images
    Made by Can-Am Shaken by OMW

  2. #2
    Join Date
    Sep 2013
    Location
    Oceanside, CA.
    Posts
    3
    One might believe by your user name it has a Mikuni HSR45 carb on that large motor, 68 hp - 47 torque, what size is the motor and what size jets? I have a 45 on my XR713L.

    "HJ"
    '85 350x, '83 XR500 3W hybrid, '73 CB750 3W hybrid, '84 YT60 Yamaha, '86 TRX650L hybrid, '90 LT500, '89 TRX250R, '85 FL350 Odyssey

  3. #3
    Join Date
    Sep 2013
    Posts
    3
    motor size is 770cc, with dual HSR-tm48 carbs. was dual HSR-tm45 on a 730cc motor.
    Made by Can-Am Shaken by OMW

  4. #4
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    i would expect 100 hp out of a motor that size. guys are running 363 cc on their MX trx250r that put out those same numbers @ just over 300 lbs wet.

    john
    If you can't modify it why have it???

  5. #5
    Join Date
    Sep 2013
    Posts
    3
    Is that 100hp at the crank or the rear wheels? Please can you post a dyno sheet of that. that is huge from a 363cc
    Made by Can-Am Shaken by OMW

  6. #6
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    look at these numbers. these are duneable/mx type power too.

    http://www.ledperformanceengines.com/trx250.htm

    john
    If you can't modify it why have it???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •